# tunneling protocol for OP2P tests.
SUPPORTED_TUNNELING_PROTO = ['vxlan', 'gre', 'geneve']
+#
+# Generic test configuration options are described at conf/01_testcases.conf
+#
+
+#
+# Options specific to integration testcases are described below:
+#
# Required for OP2P tests
# "Tunnel Type": ["vxlan"|"gre"|"geneve"] # Tunnel Type defines tunneling protocol to use.
# # It can be overridden by cli option tunnel_type.
#
# biDirectional testing for OP2P is not yet supported.
# biDirectional must be set to False.
+#
+# "TestSteps": [] # Definition of integration test steps.
+# # In case that this list is defined, then
+# # vsperf will execute defined test steps
+# # one by one. It can be used to configure
+# # vswitch, insert flows and transmit traffic.
+# # It is possible to refer to result of any
+# # previous step through #STEP[i][j] macro.
+# # Where i is a number of step (starts from 0)
+# # and j is index of result returned by step i.
+
+#
+# Common TestSteps parts ("macros")
+#
+
+# P2P macros
+STEP_VSWITCH_P2P_FLOWS_INIT = [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
+]
+STEP_VSWITCH_P2P_FLOWS_FINIT = [
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[2][1]'}],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+]
+
+# PVP and PVVP macros
+STEP_VSWITCH_PVP_INIT = [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+]
+
+STEP_VSWITCH_PVP_FINIT = [
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+]
+
+STEP_VSWITCH_PVP_FLOWS_INIT = STEP_VSWITCH_PVP_INIT + [
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
+]
+
+STEP_VSWITCH_PVP_FLOWS_FINIT = [
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[4][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[2][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[3][1]'}],
+] + STEP_VSWITCH_PVP_FINIT
+
+STEP_VSWITCH_PVVP_INIT = STEP_VSWITCH_PVP_INIT + [
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 5
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 6
+]
+
+STEP_VSWITCH_PVVP_FINIT = [
+ ['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'],
+] + STEP_VSWITCH_PVP_FINIT
+
+STEP_VSWITCH_PVVP_FLOWS_INIT = STEP_VSWITCH_PVVP_INIT + [
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[5][1]', 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
+]
+
+STEP_VSWITCH_PVVP_FLOWS_FINIT = [
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[4][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[6][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[2][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[5][1]'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[3][1]'}],
+] + STEP_VSWITCH_PVVP_FINIT
+
+#
+# Definition of integration tests
+#
INTEGRATION_TESTS = [
{
"Name": "overlay_p2p_tput",
"Deployment": "op2p",
"biDirectional": False,
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
+ "Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Throughput RFC2544 Test",
},
{
"Deployment": "op2p",
"biDirectional": False,
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
+ "Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Continuous Stream",
},
+ {
+ "Name": "overlay_p2p_decap_tput",
+ "Traffic Type": "rfc2544",
+ "Deployment": "op2p",
+ "biDirectional": False,
+ "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
+ "Tunnel Operation": "decapsulation",
+ "Description": "Overlay Decapsulation Throughput RFC2544 Test",
+ },
+ {
+ "Name": "overlay_p2p_decap_cont",
+ "Traffic Type": "continuous",
+ "Deployment": "op2p",
+ "biDirectional": False,
+ "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
+ "Tunnel Operation": "decapsulation",
+ "Description": "Overlay Decapsulation Continuous Stream",
+ },
+ {
+ "Name": "vswitch_add_del_bridge",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete bridge",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_bridges",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete bridges",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'add_switch', 'int_br1'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ['vswitch', 'del_switch', 'int_br1'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_phy_port",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete physical port",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'add_phy_port', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_phy_ports",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete physical ports",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'add_phy_port', 'int_br0'],
+ ['vswitch', 'add_phy_port', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_vport",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete virtual port",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'add_vport', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_vports",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete virtual ports",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'add_vport', 'int_br0'],
+ ['vswitch', 'add_vport', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_flow",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete flow",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'],
+ ['vswitch', 'add_phy_port', 'int_br0'],
+ ['vswitch', 'add_phy_port', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+ {
+ "Name": "vswitch_add_del_flows",
+ "Deployment": "clean",
+ "Description": "vSwitch - add and delete flows",
+ "TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
+ STEP_VSWITCH_P2P_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_p2p_tput",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch and execute RFC2544 throughput test",
+ "TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
+ [
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : True}],
+ ] +
+ STEP_VSWITCH_P2P_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_p2p_back2back",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch and execute RFC2544 back2back test",
+ "TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
+ [
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : True}],
+ ] +
+ STEP_VSWITCH_P2P_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_p2p_cont",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch and execute continuous stream test",
+ "TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
+ [
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : True}],
+ ] +
+ STEP_VSWITCH_P2P_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvp",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch and one vnf",
+ "TestSteps": STEP_VSWITCH_PVP_INIT +
+ [
+ ['vnf', 'start'],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FINIT
+ },
+ {
+ "Name": "vswitch_pvp_tput",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, vnf and execute RFC2544 throughput test",
+ "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
+ [
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : True}],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvp_back2back",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, vnf and execute RFC2544 back2back test",
+ "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
+ [
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : True}],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvp_cont",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, vnf and execute continuous stream test",
+ "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
+ [
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : True}],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvp_all",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, vnf and execute all test types",
+ "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
+ [
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : True}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : True}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : True}],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvvp",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch and two vnfs",
+ "TestSteps": STEP_VSWITCH_PVVP_INIT +
+ [
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FINIT
+ },
+ {
+ "Name": "vswitch_pvvp_tput",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, two chained vnfs and execute RFC2544 throughput test",
+ "TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
+ [
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : True}],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvvp_back2back",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, two chained vnfs and execute RFC2544 back2back test",
+ "TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
+ [
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : True}],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvvp_cont",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, two chained vnfs and execute continuous stream test",
+ "TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
+ [
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : True}],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FLOWS_FINIT
+ },
+ {
+ "Name": "vswitch_pvvp_all",
+ "Deployment": "clean",
+ "Description": "vSwitch - configure switch, two chained vnfs and execute all test types",
+ "TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
+ [
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : True}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : True}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : True}],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FLOWS_FINIT
+ },
]
+# Example of TC definition with exact vSwitch, VNF and TRAFFICGEN values.
+# {
+# "Name": "ovs_vanilla_linux_bridge_pvp_cont",
+# "Deployment": "clean",
+# "Description": "vSwitch - configure OVS Vanilla, QemuVirtioNet with linux bridge and execute continuous stream test",
+# "vSwitch" : "OvsVanilla",
+# "VNF" : "QemuVirtioNet",
+# "Trafficgen": "IxNet",
+# "Test Parameters": {"guest_loopback" : "linux_bridge"},
+# "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
+# [
+# ['vnf', 'start'],
+# ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : True}],
+# ['vnf', 'stop'],
+# ] +
+# STEP_VSWITCH_PVP_FLOWS_FINIT
+# },
Code Review / vswitchperf.git / blobdiff