-# Copyright 2015-2017 Intel Corporation.
+# Copyright 2015-2018 Intel Corporation, Tieto and others.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# See the License for the specific language governing permissions and
# limitations under the License.
-# The 1st value of SUPPORTED_TUNNELING_PROTO is used as the default
-# tunneling protocol for OP2P tests.
-SUPPORTED_TUNNELING_PROTO = ['vxlan', 'gre', 'geneve']
-
#
# Generic test configuration options are described at conf/01_testcases.conf
#
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[3][1]'}],
] + STEP_VSWITCH_PVVP_FINIT
-STEP_VSWITCH_P4VP_INIT = STEP_VSWITCH_PVVP_INIT + [
- ['vswitch', 'add_vport', 'int_br0'], # STEP 7 vm3 ports
- ['vswitch', 'add_vport', 'int_br0'], # STEP 8
- ['vswitch', 'add_vport', 'int_br0'], # STEP 9 vm4 ports
- ['vswitch', 'add_vport', 'int_br0'], # STEP 10
-]
-
-STEP_VSWITCH_P4VP_FINIT = [
- ['vswitch', 'del_port', 'int_br0', '#STEP[7][0]'], # vm3 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[8][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[9][0]'], # vm4 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[10][0]'],
-] + STEP_VSWITCH_PVVP_FINIT
-
-STEP_VSWITCH_P4VP_FLOWS_INIT = STEP_VSWITCH_P4VP_INIT + [
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \
- 'actions': ['output:#STEP[7][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[8][1]', \
- 'actions': ['output:#STEP[9][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[10][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', \
- 'actions': ['output:#STEP[10][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[9][1]', \
- 'actions': ['output:#STEP[8][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[7][1]', \
- 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[5][1]', \
- 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', \
- 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
-]
-
-STEP_VSWITCH_P4VP_FLOWS_FINIT = [
- ['vswitch', 'dump_flows', 'int_br0'],
- ['vswitch', 'del_flow', 'int_br0'],
-] + STEP_VSWITCH_P4VP_FINIT
-
-STEP_VSWITCH_2PHY_2VM_INIT = STEP_VSWITCH_PVVP_INIT
-
-STEP_VSWITCH_2PHY_2VM_FINIT = STEP_VSWITCH_PVVP_FINIT
-
-STEP_VSWITCH_2_PARALLEL_VM_FLOWS_INIT = [
- # Setup Flows to reply ICMPv6 and similar packets, so to
- # avoid flooding the internal port with their re-transmissions
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:01', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:02', \
- 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:03', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:04', \
- 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
- # Forward UDP packets depending on dest port
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- # Send VM outputs to phy port #2
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
-]
-
-STEP_VSWITCH_2PHY_4VM_INIT = STEP_VSWITCH_2PHY_2VM_INIT + [
- ['vswitch', 'add_vport', 'int_br0'], # STEP 7 vm3 ports
- ['vswitch', 'add_vport', 'int_br0'], # STEP 8
- ['vswitch', 'add_vport', 'int_br0'], # STEP 9 vm4 ports
- ['vswitch', 'add_vport', 'int_br0'], # STEP 10
-]
-
-STEP_VSWITCH_2PHY_4VM_FINIT = [
- ['vswitch', 'del_port', 'int_br0', '#STEP[7][0]'], # vm3 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[8][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[9][0]'], # vm4 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[10][0]'],
-] + STEP_VSWITCH_2PHY_2VM_FINIT
-
-STEP_VSWITCH_FLOWS_FINIT = [
- ['vswitch', 'dump_flows', 'int_br0'],
- ['vswitch', 'del_flow', 'int_br0'],
-]
-
-STEP_VSWITCH_4_PARALLEL_VM_FLOWS_INIT = [
- # Setup Flows to reply ICMPv6 and similar packets, so to
- # avoid flooding the internal port with their re-transmissions
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:01', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:02', \
- 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:03', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:04', \
- 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:05', \
- 'actions': ['output:#STEP[7][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:06', \
- 'actions': ['output:#STEP[8][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:07', \
- 'actions': ['output:#STEP[9][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:08', \
- 'actions': ['output:#STEP[10][1]'], 'idle_timeout': '0'}],
- # Forward UDP packets depending on dest port
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '2', \
- 'actions': ['output:#STEP[7][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \
- 'actions': ['output:#STEP[9][1]'], 'idle_timeout': '0'}],
- # Send VM outputs to phy port #2
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[8][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[10][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
-]
-
-STEP_VSWITCH_2PHY_6VM_INIT = STEP_VSWITCH_2PHY_4VM_INIT + [
- ['vswitch', 'add_vport', 'int_br0'], # STEP 11 vm5 vhu8
- ['vswitch', 'add_vport', 'int_br0'], # STEP 12 vhu9
- ['vswitch', 'add_vport', 'int_br0'], # STEP 13 vm6 vhu10
- ['vswitch', 'add_vport', 'int_br0'], # STEP 14 vhu11
-]
-
-STEP_VSWITCH_6_PARALLEL_VM_FLOWS_INIT = STEP_VSWITCH_4_PARALLEL_VM_FLOWS_INIT + [
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:09', \
- 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:0a', \
- 'actions': ['output:#STEP[12][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:0b', \
- 'actions': ['output:#STEP[13][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:0c', \
- 'actions': ['output:#STEP[14][1]'], 'idle_timeout': '0'}],
- # Forward UDP packets depending on dest port
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '4', \
- 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '5', \
- 'actions': ['output:#STEP[13][1]'], 'idle_timeout': '0'}],
- # Send VM outputs to phy port #2
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[12][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[14][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
-]
-
-STEP_VSWITCH_2PHY_6VM_FINIT = [
- ['vswitch', 'del_port', 'int_br0', '#STEP[11][0]'], # vm5 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[12][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[13][0]'], # vm6 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[14][0]'],
-] + STEP_VSWITCH_2PHY_4VM_FINIT
-
#
# Definition of integration tests
#
{
"Name": "overlay_p2p_tput",
"Deployment": "op2p",
- "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Throughput RFC2544 Test",
"Parameters": {
{
"Name": "overlay_p2p_cont",
"Deployment": "op2p",
- "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation RFC2544 Continuous Stream",
"Parameters": {
{
"Name": "overlay_p2p_decap_tput",
"Deployment": "op2p",
- "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation Throughput RFC2544 Test",
"Parameters": {
{
"Name": "overlay_p2p_decap_cont",
"Deployment": "op2p",
- "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation RFC2544 Continuous Stream",
"Parameters": {
] +
STEP_VSWITCH_PVVP_FLOWS_FINIT
},
- {
- "Name": "vswitch_p4vp",
- "Description": "Just configure 4 chained vnfs",
- "Deployment": "clean",
- "TestSteps": STEP_VSWITCH_P4VP_FLOWS_INIT +
- [
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- ] +
- STEP_VSWITCH_P4VP_FLOWS_FINIT
- },
{
"Name": "vswitch_p4vp_tput",
- "Description": "4 chained vnfs, execute RFC2544 throughput test",
- "Deployment": "clean",
- "TestSteps": STEP_VSWITCH_P4VP_FLOWS_INIT +
- [
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput', \
- 'bidir' : 'True'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- ] +
- STEP_VSWITCH_P4VP_FLOWS_FINIT
+ "Description": "4 chained vnfs, execute RFC2544 throughput test, deployment pvvp4",
+ "Deployment": "pvvp4",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
{
"Name": "vswitch_p4vp_back2back",
- "Description": "4 chained vnfs, execute RFC2544 back2back test",
- "Deployment": "clean",
- "TestSteps": STEP_VSWITCH_P4VP_FLOWS_INIT +
- [
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back', \
- 'bidir' : 'True'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- ] +
- STEP_VSWITCH_P4VP_FLOWS_FINIT
+ "Description": "4 chained vnfs, execute RFC2544 back2back test, deployment pvvp4",
+ "Deployment": "pvvp4",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_back2back",
+ },
+ },
},
{
"Name": "vswitch_p4vp_cont",
- "Description": "4 chained vnfs, execute RFC2544 continuous stream test",
- "Deployment": "clean",
- "TestSteps": STEP_VSWITCH_P4VP_FLOWS_INIT +
- [
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_continuous', \
- 'bidir' : 'True'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- ] +
- STEP_VSWITCH_P4VP_FLOWS_FINIT
+ "Description": "4 chained vnfs, execute RFC2544 continuous stream test, deployment pvvp4",
+ "Deployment": "pvvp4",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ },
+ },
},
{
"Name": "vswitch_p4vp_all",
- "Description": "4 chained vnfs, execute RFC2544 throughput test",
- "Deployment": "clean",
- "TestSteps": STEP_VSWITCH_P4VP_FLOWS_INIT +
+ "Description": "4 chained vnfs, execute RFC2544 throughput tests, deployment pvvp4",
+ "Deployment": "pvvp4",
+ "TestSteps":
[
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput', \
- 'bidir' : 'True'}],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back', \
- 'bidir' : 'True'}],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_continuous', \
- 'bidir' : 'True'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- ] +
- STEP_VSWITCH_P4VP_FLOWS_FINIT
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput'}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back'}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_continuous'}],
+ ]
},
{
# Topology: 2 Parallel PVP connections
# or add "Parameters" option to the test definition:
# "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],},
"Name": "2pvp_udp_dest_flows",
- "Description": "RFC2544 Continuous TC with 2 Parallel VMs, flows on UDP Dest Port",
- "Deployment": "clean",
+ "Description": "RFC2544 Continuous TC with 2 Parallel VMs, flows on UDP Dest Port, deployment pvpv2",
+ "Deployment": "pvpv2",
"Parameters" : {
"TRAFFIC" : {
- "multistream" : 2,
- "stream_type" : "L4",
+ "traffic_type" : "rfc2544_continuous",
},
},
- "TestSteps": STEP_VSWITCH_2PHY_2VM_INIT +
- STEP_VSWITCH_2_PARALLEL_VM_FLOWS_INIT + [
- # Start 2 VMs
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_continuous', 'bidir' : 'False'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- # Clean up
- ] + STEP_VSWITCH_FLOWS_FINIT +
- STEP_VSWITCH_2PHY_2VM_FINIT
},
{
# Topology: 4 Parallel PVP connections
# or add "Parameters" option to the test definition:
# "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],},
"Name": "4pvp_udp_dest_flows",
- "Description": "RFC2544 Continuous TC with 4 Parallel VMs, flows on UDP Dest Port",
- "Deployment": "clean",
+ "Description": "RFC2544 Continuous TC with 4 Parallel VMs, flows on UDP Dest Port, deployment pvpv4",
+ "Deployment": "pvpv4",
"Parameters" : {
"TRAFFIC" : {
- "multistream" : 4,
- "stream_type" : "L4",
+ "traffic_type" : "rfc2544_continuous",
},
},
- "TestSteps": STEP_VSWITCH_2PHY_4VM_INIT +
- STEP_VSWITCH_4_PARALLEL_VM_FLOWS_INIT + [
- # Start 4 VMs
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_continuous', 'bidir' : 'False'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- # Clean up
- ] + STEP_VSWITCH_FLOWS_FINIT +
- STEP_VSWITCH_2PHY_4VM_FINIT
},
{
# Topology: 6 Parallel PVP connections
# or add "Parameters" option to the test definition:
# "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],},
"Name": "6pvp_udp_dest_flows",
- "Description": "RFC2544 Continuous TC with 6 Parallel VMs, flows on UDP Dest Port",
- "Deployment": "clean",
+ "Description": "RFC2544 Continuous TC with 6 Parallel VMs, flows on UDP Dest Port, deployment pvpv6",
+ "Deployment": "pvpv6",
"Parameters" : {
"TRAFFIC" : {
- "multistream" : 6,
- "stream_type" : "L4",
+ "traffic_type" : "rfc2544_continuous",
},
},
- "TestSteps": STEP_VSWITCH_2PHY_6VM_INIT +
- STEP_VSWITCH_6_PARALLEL_VM_FLOWS_INIT + [
- # Start VMs
- ['vnf1', 'start'],
- ['vnf2', 'start'],
- ['vnf3', 'start'],
- ['vnf4', 'start'],
- ['vnf5', 'start'],
- ['vnf6', 'start'],
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_continuous', 'bidir' : 'False'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vnf3', 'stop'],
- ['vnf4', 'stop'],
- ['vnf5', 'stop'],
- ['vnf6', 'stop'],
- ] + STEP_VSWITCH_FLOWS_FINIT +
- STEP_VSWITCH_2PHY_6VM_FINIT
},
{
# Testcase for verification of vHost User NUMA awareness feature
},
"TestSteps": [
# replace original flows with vlan ID modification
- ['!vswitch', 'add_flow', 'br0', {'in_port': '1', 'actions': ['mod_vlan_vid:4','output:3']}],
- ['!vswitch', 'add_flow', 'br0', {'in_port': '2', 'actions': ['mod_vlan_vid:4','output:4']}],
- ['vswitch', 'dump_flows', 'br0'],
+ ['!vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '1', 'actions': ['mod_vlan_vid:4','output:3']}],
+ ['!vswitch', 'add_flow', '$VSWITCH_BRIDGE_NAME', {'in_port': '2', 'actions': ['mod_vlan_vid:4','output:4']}],
+ ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'],
# verify that received frames have modified vlan ID
['VNF0', 'execute_and_wait', 'tcpdump -i eth0 -c 5 -w dump.pcap vlan 4 &'],
['trafficgen', 'send_traffic',{}],
# create and configure two bridges to forward traffic through NIC under
# the test and back to the traffic generator
# 1st bridge:
- ['vswitch', 'add_switch', 'br0'],
+ ['vswitch', 'add_switch', '$VSWITCH_BRIDGE_NAME'],
['tools', 'exec_shell', 'sudo ip addr flush dev $NICS[0]["device"]'],
['tools', 'exec_shell', 'sudo ip link set dev $NICS[0]["device"] up'],
- ['tools', 'exec_shell', '$TOOLS["ovs-vsctl"] add-port br0 $NICS[0]["device"]'],
+ ['tools', 'exec_shell', '$TOOLS["ovs-vsctl"] add-port $VSWITCH_BRIDGE_NAME $NICS[0]["device"]'],
['tools', 'exec_shell', 'sudo $TOOLS["bind-tool"] --bind igb_uio $NICS[3]["pci"]'],
- ['tools', 'exec_shell', '$TOOLS["ovs-vsctl"] add-port br0 dpdk0 -- '
+ ['tools', 'exec_shell', '$TOOLS["ovs-vsctl"] add-port $VSWITCH_BRIDGE_NAME dpdk0 -- '
'set Interface dpdk0 type=dpdk options:dpdk-devargs=$NICS[3]["pci"]'],
- ['tools', 'exec_shell', '$TOOLS["ovs-ofctl"] add-flow br0 in_port=1,action='
+ ['tools', 'exec_shell', '$TOOLS["ovs-ofctl"] add-flow $VSWITCH_BRIDGE_NAME in_port=1,action='
'$_CAPTURE_P2P2P_OVS_ACTION,output:2'],
# 2nd bridge:
['vswitch', 'add_switch', 'br1'],
['tools', 'exec_shell', '$TOOLS["ovs-vsctl"] add-port br1 $NICS[1]["device"]'],
['vswitch', 'add_flow', 'br1', {'in_port': '1', 'actions': ['output:2']}],
# log flow details
- ['vswitch', 'dump_flows', 'br0'],
+ ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'],
['vswitch', 'dump_flows', 'br1'],
]
INTEGRATION_TESTS += [
['tools', 'exec_shell_background', 'tcpdump -i $NICS[2]["device"] -c 5 -w capture.pcap '
'ether src $TRAFFIC["l2"]["srcmac"]'],
['trafficgen', 'send_traffic', {}],
- ['vswitch', 'dump_flows', 'br0'],
+ ['vswitch', 'dump_flows', '$VSWITCH_BRIDGE_NAME'],
['vswitch', 'dump_flows', 'br1'],
# there must be 5 captured frames...
['tools', 'exec_shell', 'tcpdump -r capture.pcap | wc -l', '|^(\d+)$'],
Code Review / vswitchperf.git / blobdiff