First phase of Spirent Traffic Gen integration

[vswitchperf.git] / conf / 10_custom.conf

diff --git a/conf/10_custom.conf b/conf/10_custom.conf
index 9511875..f42df2d 100644 (file)
--- a/conf/10_custom.conf
+++ b/conf/10_custom.conf
@@ -12,16 +12,92 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-# traffic generator to use in tests
-RTE_SDK = ''    # full path to DPDK src dir
-OVS_DIR = ''    # full path to Open vSwitch src dir
+# Operational settings for various resources
+OVS_DIR_VANILLA  = '~/src_vanilla/ovs/'
+QEMU_DIR_VANILLA = '~/src_vanilla/qemu/'
+
+RTE_SDK_CUSE  = '~/src_cuse/dpdk/'
+OVS_DIR_CUSE  = '~/src_cuse/ovs/'
+QEMU_DIR_CUSE = '~/src_cuse/qemu/'
+
+RTE_SDK_USER  = '~/src/dpdk/'
+OVS_DIR_USER  = '~/src/ovs/'
+QEMU_DIR_USER = '~/src/qemu/'
 RTE_TARGET = '' # the relevant DPDK build target
 
 # traffic generator to use in tests
-TRAFFICGEN = 'Dummy'
+TRAFFICGEN = 'TestCenter'
+#TRAFFICGEN = 'Dummy'
 #TRAFFICGEN = 'IxNet'
 #TRAFFICGEN = 'Ixia'
 
+###########################################
+# Spirent TestCenter Configuration -- BEGIN
+# Path to Python 2 executable
+TRAFFICGEN_STC_PYTHON2_PATH = "/usr/local/bin/python2.7"
+# Path to the location of the TestCenter files
+TRAFFICGEN_STC_TESTCENTER_PATH = "./tools/pkt_gen/testcenter"
+# Name of the TestCenter RFC2544 Tput helper python script
+TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
+# The address of the Spirent Lab Server to use
+TRAFFICGEN_STC_LAB_SERVER_ADDR = "10.134.156.93"
+# The address of the Spirent License Server in your environment
+TRAFFICGEN_STC_LICENSE_SERVER_ADDR = "10.134.156.96"
+# The address of the TestCenter chassis that holds the east port
+TRAFFICGEN_STC_EAST_CHASSIS_ADDR = "10.134.156.70"
+# The slot number of the card that holds the east port
+TRAFFICGEN_STC_EAST_SLOT_NUM = "1"
+# The port number on the card that holds the east port
+TRAFFICGEN_STC_EAST_PORT_NUM = "1"
+# The address of the TestCenter chassis that holds the west port
+TRAFFICGEN_STC_WEST_CHASSIS_ADDR = "10.134.156.70"
+# The slot number of the card that holds the west port
+TRAFFICGEN_STC_WEST_SLOT_NUM = "1"
+# The port number on the card that holds the west port
+TRAFFICGEN_STC_WEST_PORT_NUM = "2"
+# The friendly name to identify the Spirent Lab Server test session
+TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
+# The directory to copy results to
+TRAFFICGEN_STC_RESULTS_DIR = "./Results"
+#  The prefix for the CSV results file
+TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
+# The number of trials to execute during the test
+TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"
+# The duration of each trial executed during the test, in seconds
+TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"
+# The traffic pattern between endpoints, BACKBONE, MESH or PAIR
+TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"
+# The search mode used to find the throughput rate, COMBO, STEP or BINARY
+TRAFFICGEN_STC_SEARCH_MODE = "BINARY"
+# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
+TRAFFICGEN_STC_LEARNING_MODE = "AUTO"
+# The minimum percent line rate that will be used during the test
+TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"
+# The maximum percent line rate that will be used during the test
+TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"
+# If SearchMode is BINARY, the percent line rate that will be used at the start of the test
+TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"
+# When SearchMode is STEP, the percent increase in load per step
+TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"
+# The minimum percentage of load adjustment between iterations
+TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"
+# The frame size, in bytes
+TRAFFICGEN_STC_FRAME_SIZE = "256"
+# The maximum acceptable frame loss percent in any iteration
+TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"
+# The address to assign to the first emulated device interface on the first east port
+TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3"
+# The gateway address to assign to the first emulated device interface on the first east port
+TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103"
+# The address to assign to the first emulated device interface on the first west port
+TRAFFICGEN_STC_WEST_INTF_ADDR = "192.85.1.103"
+# The gateway address to assign to the first emulated device interface on the first west port
+TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3"
+# Print additional information to the terminal during the test
+TRAFFICGEN_STC_VERBOSE = "True"
+# Spirent TestCenter Configuration -- END
+#########################################
+
 # Ixia/IxNet configuration
 TRAFFICGEN_IXIA_CARD = ''
 TRAFFICGEN_IXIA_PORT1 = ''