paths: Modify algorithm for PATHS verification

[vswitchperf.git] / conf / 10_custom.conf

diff --git a/conf/10_custom.conf b/conf/10_custom.conf
index 4ffe470..8020bb9 100644 (file)
--- a/conf/10_custom.conf
+++ b/conf/10_custom.conf
@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-RTE_TARGET = '' # the relevant DPDK build target
+#RTE_TARGET = '' # the relevant DPDK build target
 
 # traffic generator to use in tests
 #TRAFFICGEN = 'TestCenter'
@@ -20,7 +20,8 @@ TRAFFICGEN = 'Dummy'
 #TRAFFICGEN = 'IxNet'
 #TRAFFICGEN = 'Ixia'
 #TRAFFICGEN = 'Xena'
-#TRAFFICGEN = 'MoonGen'
+#TRAFFICGEN = 'Moongen'
+#TRAFFICGEN = 'Trex'
 
 ###########################################
 # Spirent TestCenter Configuration -- BEGIN
@@ -47,7 +48,7 @@ TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3"
 TRAFFICGEN_IXIA_CARD = ''
 TRAFFICGEN_IXIA_PORT1 = ''
 TRAFFICGEN_IXIA_PORT2 = ''
-TRAFFICGEN_IXIA_LIB_PATH = '/opt/ixos/lib/ixTcl1.0'
+TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
 TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnet/IxTclNetwork'
 
 # Ixia traffic generator
@@ -79,6 +80,28 @@ TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
 TRAFFICGEN_XENA_PORT1_CIDR = 24
 TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
 
+# Xena RFC 2544 options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
+TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
+TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
+TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
+TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
+TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
+
+# Xena RFC 2544 final verification options
+TRAFFICGEN_XENA_RFC2544_VERIFY = False
+TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
+# Number of verify attempts before giving up...
+TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
+# Logic for restarting binary search, see documentation for details
+TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True
+
+# Xena Continuous traffic options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
+
 ###################################################
 # MoonGen Configuration and Connection Info-- BEGIN
 
@@ -87,11 +110,54 @@ TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ""
 TRAFFICGEN_MOONGEN_USER = "root"
 TRAFFICGEN_MOONGEN_BASE_DIR = "/root/MoonGen"
 TRAFFICGEN_MOONGEN_PORTS = "{0,1}"
+# Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
+# Today only 10 Gbps is supported
+TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
 
 # MoonGen Configuration and Connection Info-- END
 ###################################################
 
-#TEST_PARAMS = {'pkt_sizes':'64'}
+###################################################
+# TREX Configuration and Connection Info-- BEGIN
+
+# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
+# Example: TRAFFICGEN_TREX_USER = 'root'
+# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
+# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
+TRAFFICGEN_TREX_HOST_IP_ADDR = ''
+TRAFFICGEN_TREX_USER = ''
+TRAFFICGEN_TREX_BASE_DIR = ''
+TRAFFICGEN_TREX_PORT1 = ''
+TRAFFICGEN_TREX_PORT2 = ''
+# Latency statistics are collected by separate stream created for each interface.
+# Parameter below defines frequency of packets used for latency measurement in PPS.
+# Value 0 will disable latency specific streams.
+TRAFFICGEN_TREX_LATENCY_PPS = 1000
+# Example 10 Gbps: TRAFFICGEN_TREXINE_SPEED_GBPS = '10'
+# Today only 10 Gbps is supported
+TRAFFICGEN_TREX_LINE_SPEED_GBPS = '10'
+# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
+TRAFFICGEN_TREX_PROMISCUOUS=False
+
+# TREX Configuration and Connection Info-- END
+####################################################
+
+####################################################
+#TEST_PARAMS = {'TRAFFICGEN_PKT_SIZES':(64,)}
 OPNFV_INSTALLER = "Fuel"
-OPNFV_URL = "http://testresults.opnfv.org/testapi"
+OPNFV_URL = "http://testresults.opnfv.org/test/api/v1"
 PACKAGE_LIST = "src/package-list.mk"
+
+
+# Binary package configuration for RHEL 7.3 systems with Vanilla OVS
+####################################################################
+# Uncomment these lines for binary usage of Vanilla OVS.
+
+#PATHS['vswitch']['ovs_var_tmp'] = '/var/run/openvswitch/'
+#PATHS['vswitch']['ovs_etc_tmp'] = '/etc/openvswitch/'
+#PATHS['vswitch']['OvsVanilla']['bin']['modules'] = [
+#        'libcrc32c', 'ip_tunnel', 'vxlan', 'gre', 'nf_nat', 'nf_nat_ipv6',
+#        'nf_nat_ipv4', 'nf_conntrack', 'nf_defrag_ipv4', 'nf_defrag_ipv6',
+#        'openvswitch']
+#PATHS['vswitch']['OvsVanilla']['type'] = 'bin'
+