# See the License for the specific language governing permissions and
# limitations under the License.
-# traffic generator to use in tests
-OVS_DIR_VANILLA = '~/src_vanilla/ovs/'
-QEMU_DIR_VANILLA = '~/src_vanilla/qemu/'
-
-RTE_SDK_CUSE = '~/src_cuse/dpdk/'
-OVS_DIR_CUSE = '~/src_cuse/ovs/'
-QEMU_DIR_CUSE = '~/src_cuse/qemu/'
-
-RTE_SDK_USER = '~/src/dpdk/'
-OVS_DIR_USER = '~/src/ovs/'
-QEMU_DIR_USER = '~/src/qemu/'
-RTE_TARGET = '' # the relevant DPDK build target
+#RTE_TARGET = '' # the relevant DPDK build target
# traffic generator to use in tests
+#TRAFFICGEN = 'TestCenter'
TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
+#TRAFFICGEN = 'Xena'
+#TRAFFICGEN = 'Moongen'
+#TRAFFICGEN = 'Trex'
+
+###########################################
+# Spirent TestCenter Configuration -- BEGIN
+TRAFFICGEN_STC_LAB_SERVER_ADDR = "10.134.156.93"
+
+TRAFFICGEN_STC_LICENSE_SERVER_ADDR = "10.134.156.96"
+
+TRAFFICGEN_STC_EAST_CHASSIS_ADDR = "10.134.156.70"
+TRAFFICGEN_STC_EAST_SLOT_NUM = "1"
+TRAFFICGEN_STC_EAST_PORT_NUM = "1"
+TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3"
+TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103"
+
+TRAFFICGEN_STC_WEST_CHASSIS_ADDR = "10.134.156.70"
+TRAFFICGEN_STC_WEST_SLOT_NUM = "1"
+TRAFFICGEN_STC_WEST_PORT_NUM = "2"
+TRAFFICGEN_STC_WEST_INTF_ADDR = "192.85.1.103"
+TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3"
+# Spirent TestCenter Configuration -- END
+#########################################
+
# Ixia/IxNet configuration
TRAFFICGEN_IXIA_CARD = ''
TRAFFICGEN_IXIA_PORT1 = ''
TRAFFICGEN_IXIA_PORT2 = ''
-TRAFFICGEN_IXIA_LIB_PATH = '/opt/ixos/lib/ixTcl1.0'
+TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnet/IxTclNetwork'
# Ixia traffic generator
TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''
TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''
-TEST_PARAMS = {'packet_sizes':'64'}
+# Xena traffic generator connection info
+TRAFFICGEN_XENA_IP = ''
+TRAFFICGEN_XENA_PORT1 = ''
+TRAFFICGEN_XENA_PORT2 = ''
+TRAFFICGEN_XENA_USER = ''
+TRAFFICGEN_XENA_PASSWORD = ''
+TRAFFICGEN_XENA_MODULE1 = ''
+TRAFFICGEN_XENA_MODULE2 = ''
+
+# Xena Port IP info
+TRAFFICGEN_XENA_PORT0_IP = '192.168.199.10'
+TRAFFICGEN_XENA_PORT0_CIDR = 24
+TRAFFICGEN_XENA_PORT0_GATEWAY = '192.168.199.1'
+TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
+TRAFFICGEN_XENA_PORT1_CIDR = 24
+TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
+
+# Xena RFC 2544 options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
+TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
+TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
+TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
+TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
+TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
+
+# Xena RFC 2544 final verification options
+TRAFFICGEN_XENA_RFC2544_VERIFY = False
+TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
+# Number of verify attempts before giving up...
+TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
+# Logic for restarting binary search, see documentation for details
+TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True
+
+# Xena Continuous traffic options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
+
+###################################################
+# MoonGen Configuration and Connection Info-- BEGIN
+
+# Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
+TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ""
+TRAFFICGEN_MOONGEN_USER = "root"
+TRAFFICGEN_MOONGEN_BASE_DIR = "/root/MoonGen"
+TRAFFICGEN_MOONGEN_PORTS = "{0,1}"
+# Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
+# Today only 10 Gbps is supported
+TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
+
+# MoonGen Configuration and Connection Info-- END
+###################################################
+
+###################################################
+# TREX Configuration and Connection Info-- BEGIN
+
+# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
+# Example: TRAFFICGEN_TREX_USER = 'root'
+# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
+# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
+TRAFFICGEN_TREX_HOST_IP_ADDR = ''
+TRAFFICGEN_TREX_USER = ''
+TRAFFICGEN_TREX_BASE_DIR = ''
+TRAFFICGEN_TREX_PORT1 = ''
+TRAFFICGEN_TREX_PORT2 = ''
+# Latency statistics are collected by separate stream created for each interface.
+# Parameter below defines frequency of packets used for latency measurement in PPS.
+# Value 0 will disable latency specific streams.
+TRAFFICGEN_TREX_LATENCY_PPS = 1000
+# Enablement of learning packets before sending test traffic
+TRAFFICGEN_TREX_LEARNING_MODE = True
+TRAFFICGEN_TREX_LEARNING_DURATION = 5
+# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
+TRAFFICGEN_TREX_PROMISCUOUS = False
+# Enable below options to force T-rex api to attempt to use speed specified on server
+# side when pushing traffic. For 40G use 40000. For 25G use 25000.
+TRAFFICGEN_TREX_FORCE_PORT_SPEED = False
+TRAFFICGEN_TREX_PORT_SPEED = 10000 # 10G
+# TRex validation option for RFC2544
+TRAFFICGEN_TREX_VERIFICATION_MODE = False
+TRAFFICGEN_TREX_VERIFICATION_DURATION = 60
+TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10
+
+# TREX Configuration and Connection Info-- END
+####################################################
+
+####################################################
+#TEST_PARAMS = {'TRAFFICGEN_PKT_SIZES':(64,)}
+OPNFV_INSTALLER = "Fuel"
+OPNFV_URL = "http://testresults.opnfv.org/test/api/v1"
+PACKAGE_LIST = "src/package-list.mk"
+
+
+# Binary package configuration for RHEL 7.3 systems with Vanilla OVS
+####################################################################
+# Uncomment these lines for binary usage of Vanilla OVS.
+
+#PATHS['vswitch']['ovs_var_tmp'] = '/var/run/openvswitch/'
+#PATHS['vswitch']['ovs_etc_tmp'] = '/etc/openvswitch/'
+#PATHS['vswitch']['OvsVanilla']['bin']['modules'] = [
+# 'libcrc32c', 'ip_tunnel', 'vxlan', 'gre', 'nf_nat', 'nf_nat_ipv6',
+# 'nf_nat_ipv4', 'nf_conntrack', 'nf_defrag_ipv4', 'nf_defrag_ipv6',
+# 'openvswitch']
+#PATHS['vswitch']['OvsVanilla']['type'] = 'bin'
+
+
Code Review / vswitchperf.git / blobdiff