# log file for all traffic generator related commands
LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
+# TRAFFIC dictionary defines traffic parameters used by all traffic generators.
+# Detailed description of TRAFFIC dictionary items follows:
+#
+# 'traffic_type' - One of the supported traffic types.
+# E.g. rfc2544_throughput, rfc2544_back2back
+# or rfc2544_continuous
+# Data type: str
+# Default value: "rfc2544_throughput".
+# 'bidir' - Specifies if generated traffic will be full-duplex (True)
+# or half-duplex (False)
+# Data type: str
+# Supported values: "True", "False"
+# Default value: "False".
+# 'frame_rate' - Defines desired percentage of frame rate used during
+# continuous stream tests.
+# Data type: int
+# Default value: 100.
+# 'multistream' - Defines number of flows simulated by traffic generator.
+# Value 0 disables multistream feature
+# Data type: int
+# Supported values: 0-65535
+# Default value: 0.
+# 'stream_type' - Stream type is an extension of the "multistream" feature.
+# If multistream is disabled, then stream type will be
+# ignored. Stream type defines ISO OSI network layer used
+# for simulation of multiple streams.
+# Data type: str
+# Supported values:
+# "L2" - iteration of destination MAC address
+# "L3" - iteration of destination IP address
+# "L4" - iteration of destination port
+# of selected transport protocol
+# Default value: "L4".
+# 'pre_installed_flows'
+# - Pre-installed flows is an extension of the "multistream"
+# feature. If enabled, it will implicitly insert a flow
+# for each stream. If multistream is disabled, then
+# pre-installed flows will be ignored.
+# Note: It is supported only for p2p deployment scenario.
+# Data type: str
+# Supported values:
+# "Yes" - flows will be inserted into OVS
+# "No" - flows won't be inserted into OVS
+# Default value: "No".
+# 'flow_type' - Defines flows complexity.
+# Data type: str
+# Supported values:
+# "port" - flow is defined by ingress ports
+# "IP" - flow is defined by ingress ports
+# and src and dst IP addresses
+# Default value: "port"
+# 'l2' - A dictionary with l2 network layer details. Supported
+# values are:
+# 'srcmac' - Specifies source MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "00:00:00:00:00:00".
+# 'dstmac' - Specifies destination MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "00:00:00:00:00:00".
+# 'framesize' - Specifies default frame size. This value should not be
+# changed directly. It will be overridden during testcase
+# execution by values specified by list TRAFFICGEN_PKT_SIZES.
+# Data type: int
+# Default value: 64
+# 'l3' - A dictionary with l3 network layer details. Supported
+# values are:
+# 'srcip' - Specifies source MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "1.1.1.1".
+# 'dstip' - Specifies destination MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "90.90.90.90".
+# 'proto' - Specifies deflaut protocol type.
+# Please check particular traffic generator implementation
+# for supported protocol types.
+# Data type: str
+# Default value: "udp".
+# 'l4' - A dictionary with l4 network layer details. Supported
+# values are:
+# 'srcport' - Specifies source port of selected transport protocol.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: int
+# Default value: 3000
+# 'dstport' - Specifies destination port of selected transport protocol.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: int
+# Default value: 3001
+# 'vlan' - A dictionary with vlan encapsulation details. Supported
+# values are:
+# 'enabled' - Specifies if vlan encapsulation should be enabled or
+# disabled.
+# Data type: bool
+# Default value: False
+# 'id' - Specifies vlan id.
+# Data type: int (NOTE: must fit to 12 bits)
+# Default value: 0
+# 'priority' - Specifies a vlan priority (PCP header field).
+# Data type: int (NOTE: must fit to 3 bits)
+# Default value: 0
+# 'cfi' - Specifies if frames can or cannot be dropped during
+# congestion (DEI header field).
+# Data type: int (NOTE: must fit to 1 bit)
+# Default value: 0
+TRAFFIC = {
+ 'traffic_type' : 'rfc2544_throughput',
+ 'frame_rate' : 100,
+ 'bidir' : 'True', # will be passed as string in title format to tgen
+ 'multistream' : 0,
+ 'stream_type' : 'L4',
+ 'pre_installed_flows' : 'No', # used by vswitch implementation
+ 'flow_type' : 'port', # used by vswitch implementation
+
+ 'l2': {
+ 'framesize': 64,
+ 'srcmac': '00:00:00:00:00:00',
+ 'dstmac': '00:00:00:00:00:00',
+ },
+ 'l3': {
+ 'proto': 'udp',
+ 'srcip': '1.1.1.1',
+ 'dstip': '90.90.90.90',
+ },
+ 'l4': {
+ 'srcport': 3000,
+ 'dstport': 3001,
+ },
+ 'vlan': {
+ 'enabled': False,
+ 'id': 0,
+ 'priority': 0,
+ 'cfi': 0,
+ },
+}
+
#path to traffic generators directory.
TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
-#TRAFFICGEN = 'MoonGen'
+#TRAFFICGEN = 'Moongen'
# List of packet sizes to send.
# Expand like this: (64, 128, 256, 512, 1024)
TRAFFICGEN_PKT_SIZES = (64,)
+TRAFFICGEN_DURATION = 30
+
+TRAFFICGEN_RFC2544_TESTS = 1
+TRAFFICGEN_RFC2889_TRIALS = 1
+TRAFFICGEN_LOSSRATE = 0.0
+
+##############################
+# DUMMY Configuration -- BEGIN
+
+# By default, dummy traffic generator asks for "measured" values.
+# Following dictionary allows to preconfigure these values and
+# to avoid user interaction. It can be useful for automated
+# integration tests.
+# Example of values for continuous traffic type:
+# TRAFFICGEN_DUMMY_RESULTS{'frames rx': 500000,
+# 'frames tx': 500000,
+# 'rx rate %': 100,
+# 'tx rate %': 100,
+# 'frameloss %': 0,
+# 'min latency': 1,
+# 'max latency': 15,
+# 'avg latency': 2.5,
+# }
+#
+TRAFFICGEN_DUMMY_RESULTS = {}
+
+# DUMMY Configuration -- END
+############################
+
+#############################
+# IXIA Configuration -- BEGIN
+
# path to 'ixos' install path
TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
# as the previous one
TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''
+# directory with 3rd party scripts generated by IXIA tools
+TRAFFICGEN_IXIA_3RD_PARTY = os.path.join(ROOT_DIR, '3rd_party/ixia')
+
+# default TCL script, which will be used for IXNETWORK configuration
TRAFFICGEN_IXNET_TCL_SCRIPT = 'ixnetrfc2544.tcl'
+# IXIA Configuration -- END
+###########################
+
+
###########################################
# Spirent TestCenter Configuration -- BEGIN
# Name of the TestCenter RFC2544 Tput helper python script
TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
+# Name of the Testcenter RFC2899 Tput Helper Python Scripts
+TRAFFICGEN_STC_RFC2889_TEST_FILE_NAME = "testcenter-rfc2889-rest.py"
+
+# 2889 Port Locations
+TRAFFICGEN_STC_RFC2889_LOCATION = ""
+
# The address of the Spirent Lab Server to use
TRAFFICGEN_STC_LAB_SERVER_ADDR = ""
TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
# The directory to copy results to
-TRAFFICGEN_STC_RESULTS_DIR = "./Results"
+TRAFFICGEN_STC_RESULTS_DIR = os.path.join(ROOT_DIR, "Results")
# The prefix for the CSV results file
TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
# Spirent TestCenter Configuration -- END
#########################################
+#############################
+# Xena Configuration -- BEGIN
+
# Xena traffic generator connection info
TRAFFICGEN_XENA_IP = ''
TRAFFICGEN_XENA_PORT1 = ''
TRAFFICGEN_XENA_PORT1_CIDR = 24
TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
+# Xena RFC 2544 options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
+TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
+TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
+TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
+TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
+TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
+
+# Xena Continuous traffic options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
+
+# Xena Configuration -- END
+###########################
+
###################################################
# MoonGen Configuration and Connection Info-- BEGIN
+# Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ''
TRAFFICGEN_MOONGEN_USER = ''
TRAFFICGEN_MOONGEN_BASE_DIR = ''
TRAFFICGEN_MOONGEN_PORTS = ''
+# Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
+# Today only 10 Gbps is supported
+TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ''
# MoonGen Configuration and Connection Info-- END
###################################################
Code Review / vswitchperf.git / blobdiff