-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2017 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# 'multistream' - Defines number of flows simulated by traffic generator.
# Value 0 disables multistream feature
# Data type: int
-# Supported values: 0-65535
+# Supported values: 0-65536 for 'L4' stream type
+# unlimited for 'L2' and 'L3' stream types
# Default value: 0.
# 'stream_type' - Stream type is an extension of the "multistream" feature.
# If multistream is disabled, then stream type will be
# of selected transport protocol
# Default value: "L4".
# 'pre_installed_flows'
-# - Pre-installed flows is an extension of the multistream"
-# feature. If multistream is disabled, then pre-installed
-# flows will be ignored. It defines if stream specific flows
-# will be inserted into OVS or not.
+# - Pre-installed flows is an extension of the "multistream"
+# feature. If enabled, it will implicitly insert a flow
+# for each stream. If multistream is disabled, then
+# pre-installed flows will be ignored.
+# Note: It is supported only for p2p deployment scenario.
# Data type: str
# Supported values:
# "Yes" - flows will be inserted into OVS
# "IP" - flow is defined by ingress ports
# and src and dst IP addresses
# Default value: "port"
+# 'flow_control' - Controls flow control support by traffic generator.
+# Supported values:
+# False - flow control is disabled
+# True - flow control is enabled
+# Default value: False
+# Note: Currently it is supported by IxNet only
+# 'learning_frames' - Controls learning frames support by traffic generator.
+# Supported values:
+# False - learning freames are disabled
+# True - learning freames are enabled
+# Default value: True
+# Note: Currently it is supported by IxNet only
# 'l2' - A dictionary with l2 network layer details. Supported
# values are:
# 'srcmac' - Specifies source MAC address filled by traffic generator.
# Default value: 64
# 'l3' - A dictionary with l3 network layer details. Supported
# values are:
+# 'enabled' - Specifies if l3 layer should be enabled or disabled.
+# Data type: bool
+# Default value: True
+# NOTE: Supported only by IxNet trafficgen class
# 'srcip' - Specifies source MAC address filled by traffic generator.
# NOTE: It can be modified by vsperf in some scenarios.
# Data type: str
# Default value: "udp".
# 'l4' - A dictionary with l4 network layer details. Supported
# values are:
+# 'enabled' - Specifies if l4 layer should be enabled or disabled.
+# Data type: bool
+# Default value: True
+# NOTE: Supported only by IxNet trafficgen class
# 'srcport' - Specifies source port of selected transport protocol.
# NOTE: It can be modified by vsperf in some scenarios.
# Data type: int
'stream_type' : 'L4',
'pre_installed_flows' : 'No', # used by vswitch implementation
'flow_type' : 'port', # used by vswitch implementation
-
+ 'flow_control' : False, # supported only by IxNet
+ 'learning_frames' : True, # supported only by IxNet
'l2': {
'framesize': 64,
'srcmac': '00:00:00:00:00:00',
'dstmac': '00:00:00:00:00:00',
},
'l3': {
+ 'enabled': True,
'proto': 'udp',
'srcip': '1.1.1.1',
'dstip': '90.90.90.90',
},
'l4': {
+ 'enabled': True,
'srcport': 3000,
'dstport': 3001,
},
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
#TRAFFICGEN = 'Moongen'
+#TRAFFICGEN = 'Trex'
# List of packet sizes to send.
# Expand like this: (64, 128, 256, 512, 1024)
TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
+# Xena RFC 2544 final verification options
+TRAFFICGEN_XENA_RFC2544_VERIFY = False
+TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
+# Number of verify attempts before giving up...
+TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
+# Logic for restarting binary search, see documentation for details
+TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True
+
+# Xena Continuous traffic options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
+
# Xena Configuration -- END
###########################
TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ''
# MoonGen Configuration and Connection Info-- END
-###################################################
+#################################################
+
+################################################
+# Trex Configuration and Connection Info-- BEGIN
+
+# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
+# Example: TRAFFICGEN_TREX_USER = 'root'
+# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
+# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
+TRAFFICGEN_TREX_HOST_IP_ADDR = ''
+TRAFFICGEN_TREX_USER = ''
+TRAFFICGEN_TREX_BASE_DIR = ''
+TRAFFICGEN_TREX_PORT1 = ''
+TRAFFICGEN_TREX_PORT2 = ''
+# RFC2544 Throughput execution will end after threshold below is reached.
+# It defines maximal difference between frame rate of successful (i.e. defined
+# frameloss reached) and unsuccessful (i.e. frameloss exceeded) iterations.
+TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = 0.05
+# Latency statistics are collected by separate stream created for each interface.
+# Parameter below defines frequency of packets used for latency measurement in PPS.
+# Value 0 will disable latency specific streams.
+TRAFFICGEN_TREX_LATENCY_PPS = 1000
+# Example 10 Gbps: TRAFFICGEN_TREXINE_SPEED_GBPS = '10'
+# Today only 10 Gbps is supported
+TRAFFICGEN_TREX_LINE_SPEED_GBPS = '10'
+# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
+TRAFFICGEN_TREX_PROMISCUOUS=False
+PATHS['trafficgen'] = {
+ 'trex': {
+ 'type' : 'src',
+ 'src': {
+ 'path': os.path.join(ROOT_DIR, 'src/trex/trex/scripts/automation/trex_control_plane/stl')
+ }
+ }
+}
+# TREX Configuration and Connection Info-- END
+##############################################