# congestion (DEI header field).
# Data type: int (NOTE: must fit to 1 bit)
# Default value: 0
+# 'capture' - A dictionary with traffic capture configuration.
+# NOTE: It is supported only by T-Rex traffic generator.
+# 'enabled' - Specifies if traffic should be captured
+# Data type: bool
+# Default value: False
+# 'tx_ports' - A list of ports, where frames transmitted towards DUT will
+# be captured. Ports have numbers 0 and 1. TX packet capture
+# is disabled if list of ports is empty.
+# Data type: list
+# Default value: [0]
+# 'rx_ports' - A list of ports, where frames received from DUT will
+# be captured. Ports have numbers 0 and 1. RX packet capture
+# is disabled if list of ports is empty.
+# Data type: list
+# Default value: [1]
+# 'count' - A number of frames to be captured. The same count value
+# is applied to both TX and RX captures.
+# Data type: int
+# Default value: 1
+# 'filter' - An expression used to filter TX and RX packets. It uses the same
+# syntax as pcap library. See pcap-filter man page for additional
+# details.
+# Data type: str
+# Default value: ''
TRAFFIC = {
'traffic_type' : 'rfc2544_throughput',
'frame_rate' : 100,
'priority': 0,
'cfi': 0,
},
+ 'capture': {
+ 'enabled': False,
+ 'tx_ports' : [0],
+ 'rx_ports' : [1],
+ 'count': 1,
+ 'filter': '',
+ },
}
#path to traffic generators directory.
# Parameter below defines frequency of packets used for latency measurement in PPS.
# Value 0 will disable latency specific streams.
TRAFFICGEN_TREX_LATENCY_PPS = 1000
-# Example 10 Gbps: TRAFFICGEN_TREXINE_SPEED_GBPS = '10'
-# Today only 10 Gbps is supported
-TRAFFICGEN_TREX_LINE_SPEED_GBPS = '10'
-# Enable of learning packets before sending test traffic
+# Enablement of learning packets before sending test traffic
TRAFFICGEN_TREX_LEARNING_MODE = True
TRAFFICGEN_TREX_LEARNING_DURATION = 5
# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
}
}
}
+# TRex validation option for RFC2544
+TRAFFICGEN_TREX_VERIFICATION_MODE = False
+TRAFFICGEN_TREX_VERIFICATION_DURATION = 60
+TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10
# TREX Configuration and Connection Info-- END
##############################################