-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2017 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# log file for all traffic generator related commands
LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
+# TRAFFIC dictionary defines traffic parameters used by all traffic generators.
+# Detailed description of TRAFFIC dictionary items follows:
+#
+# 'traffic_type' - One of the supported traffic types.
+# E.g. rfc2544_throughput, rfc2544_back2back
+# or rfc2544_continuous
+# Data type: str
+# Default value: "rfc2544_throughput".
+# 'bidir' - Specifies if generated traffic will be full-duplex (True)
+# or half-duplex (False)
+# Data type: str
+# Supported values: "True", "False"
+# Default value: "False".
+# 'frame_rate' - Defines desired percentage of frame rate used during
+# continuous stream tests.
+# Data type: int
+# Default value: 100.
+# 'multistream' - Defines number of flows simulated by traffic generator.
+# Value 0 disables multistream feature
+# Data type: int
+# Supported values: 0-65536 for 'L4' stream type
+# unlimited for 'L2' and 'L3' stream types
+# Default value: 0.
+# 'stream_type' - Stream type is an extension of the "multistream" feature.
+# If multistream is disabled, then stream type will be
+# ignored. Stream type defines ISO OSI network layer used
+# for simulation of multiple streams.
+# Data type: str
+# Supported values:
+# "L2" - iteration of destination MAC address
+# "L3" - iteration of destination IP address
+# "L4" - iteration of destination port
+# of selected transport protocol
+# Default value: "L4".
+# 'pre_installed_flows'
+# - Pre-installed flows is an extension of the "multistream"
+# feature. If enabled, it will implicitly insert a flow
+# for each stream. If multistream is disabled, then
+# pre-installed flows will be ignored.
+# Note: It is supported only for p2p deployment scenario.
+# Data type: str
+# Supported values:
+# "Yes" - flows will be inserted into OVS
+# "No" - flows won't be inserted into OVS
+# Default value: "No".
+# 'flow_type' - Defines flows complexity.
+# Data type: str
+# Supported values:
+# "port" - flow is defined by ingress ports
+# "IP" - flow is defined by ingress ports
+# and src and dst IP addresses
+# Default value: "port"
+# 'flow_control' - Controls flow control support by traffic generator.
+# Supported values:
+# False - flow control is disabled
+# True - flow control is enabled
+# Default value: False
+# Note: Currently it is supported by IxNet only
+# 'learning_frames' - Controls learning frames support by traffic generator.
+# Supported values:
+# False - learning freames are disabled
+# True - learning freames are enabled
+# Default value: True
+# Note: Currently it is supported by IxNet only
+# 'l2' - A dictionary with l2 network layer details. Supported
+# values are:
+# 'srcmac' - Specifies source MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "00:00:00:00:00:00".
+# 'dstmac' - Specifies destination MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "00:00:00:00:00:00".
+# 'framesize' - Specifies default frame size. This value should not be
+# changed directly. It will be overridden during testcase
+# execution by values specified by list TRAFFICGEN_PKT_SIZES.
+# Data type: int
+# Default value: 64
+# 'l3' - A dictionary with l3 network layer details. Supported
+# values are:
+# 'enabled' - Specifies if l3 layer should be enabled or disabled.
+# Data type: bool
+# Default value: True
+# NOTE: Supported only by IxNet trafficgen class
+# 'srcip' - Specifies source MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "1.1.1.1".
+# 'dstip' - Specifies destination MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "90.90.90.90".
+# 'proto' - Specifies deflaut protocol type.
+# Please check particular traffic generator implementation
+# for supported protocol types.
+# Data type: str
+# Default value: "udp".
+# 'l4' - A dictionary with l4 network layer details. Supported
+# values are:
+# 'enabled' - Specifies if l4 layer should be enabled or disabled.
+# Data type: bool
+# Default value: True
+# NOTE: Supported only by IxNet trafficgen class
+# 'srcport' - Specifies source port of selected transport protocol.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: int
+# Default value: 3000
+# 'dstport' - Specifies destination port of selected transport protocol.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: int
+# Default value: 3001
+# 'vlan' - A dictionary with vlan encapsulation details. Supported
+# values are:
+# 'enabled' - Specifies if vlan encapsulation should be enabled or
+# disabled.
+# Data type: bool
+# Default value: False
+# 'id' - Specifies vlan id.
+# Data type: int (NOTE: must fit to 12 bits)
+# Default value: 0
+# 'priority' - Specifies a vlan priority (PCP header field).
+# Data type: int (NOTE: must fit to 3 bits)
+# Default value: 0
+# 'cfi' - Specifies if frames can or cannot be dropped during
+# congestion (DEI header field).
+# Data type: int (NOTE: must fit to 1 bit)
+# Default value: 0
+TRAFFIC = {
+ 'traffic_type' : 'rfc2544_throughput',
+ 'frame_rate' : 100,
+ 'bidir' : 'True', # will be passed as string in title format to tgen
+ 'multistream' : 0,
+ 'stream_type' : 'L4',
+ 'pre_installed_flows' : 'No', # used by vswitch implementation
+ 'flow_type' : 'port', # used by vswitch implementation
+ 'flow_control' : False, # supported only by IxNet
+ 'learning_frames' : True, # supported only by IxNet
+ 'l2': {
+ 'framesize': 64,
+ 'srcmac': '00:00:00:00:00:00',
+ 'dstmac': '00:00:00:00:00:00',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'srcip': '1.1.1.1',
+ 'dstip': '90.90.90.90',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 3000,
+ 'dstport': 3001,
+ },
+ 'vlan': {
+ 'enabled': False,
+ 'id': 0,
+ 'priority': 0,
+ 'cfi': 0,
+ },
+}
+
#path to traffic generators directory.
TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
#TRAFFICGEN = 'Moongen'
+#TRAFFICGEN = 'Trex'
# List of packet sizes to send.
# Expand like this: (64, 128, 256, 512, 1024)
TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
+# Xena RFC 2544 final verification options
+TRAFFICGEN_XENA_RFC2544_VERIFY = False
+TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
+# Number of verify attempts before giving up...
+TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
+# Logic for restarting binary search, see documentation for details
+TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True
+
+# Xena Continuous traffic options
+# Please reference xena documentation before making changes to these settings
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
+TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
+
# Xena Configuration -- END
###########################
TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ''
# MoonGen Configuration and Connection Info-- END
-###################################################
+#################################################
+
+################################################
+# Trex Configuration and Connection Info-- BEGIN
+
+# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
+# Example: TRAFFICGEN_TREX_USER = 'root'
+# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
+# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
+TRAFFICGEN_TREX_HOST_IP_ADDR = ''
+TRAFFICGEN_TREX_USER = ''
+TRAFFICGEN_TREX_BASE_DIR = ''
+TRAFFICGEN_TREX_PORT1 = ''
+TRAFFICGEN_TREX_PORT2 = ''
+# RFC2544 Throughput execution will end after threshold below is reached.
+# It defines maximal difference between frame rate of successful (i.e. defined
+# frameloss reached) and unsuccessful (i.e. frameloss exceeded) iterations.
+TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = 0.05
+# Latency statistics are collected by separate stream created for each interface.
+# Parameter below defines frequency of packets used for latency measurement in PPS.
+# Value 0 will disable latency specific streams.
+TRAFFICGEN_TREX_LATENCY_PPS = 1000
+# Example 10 Gbps: TRAFFICGEN_TREXINE_SPEED_GBPS = '10'
+# Today only 10 Gbps is supported
+TRAFFICGEN_TREX_LINE_SPEED_GBPS = '10'
+# Enable of learning packets before sending test traffic
+TRAFFICGEN_TREX_LEARNING_MODE = True
+TRAFFICGEN_TREX_LEARNING_DURATION = 5
+# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
+TRAFFICGEN_TREX_PROMISCUOUS = False
+PATHS['trafficgen'] = {
+ 'Trex': {
+ 'type' : 'src',
+ 'src': {
+ 'path': os.path.join(ROOT_DIR, 'src/trex/trex/scripts/automation/trex_control_plane/stl')
+ }
+ }
+}
+# TREX Configuration and Connection Info-- END
+##############################################