-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# limitations under the License.
# ############################
-# vswitch configuration
+# Directories
# ############################
-RTE_SDK = '~/dpdk'
-OVS_DIR = '~/openvswitch'
+# use DPDK VHOST USER by default
+RTE_SDK = RTE_SDK_USER
+OVS_DIR = OVS_DIR_USER
+
+OVS_VAR_DIR = '/usr/local/var/run/openvswitch/'
+OVS_ETC_DIR = '/usr/local/etc/openvswitch/'
+
+VSWITCH_DIR = os.path.join(ROOT_DIR, 'vswitches')
# ############################
# DPDK configuration
# ############################
# DPDK target used when builing DPDK
-RTE_TARGET = 'x86_64-ivshmem-linuxapp-gcc'
-
-# list of NIC HWIDs which will be bound to the 'igb_uio' driver on
-# system init
-WHITELIST_NICS = ['05:00.0', '05:00.1']
-
-# list of NIC HWIDs which will be ignored by the 'igb_uio' driver on
-# system init
-BLACKLIST_NICS = ['0000:09:00.0', '0000:09:00.1', '0000:09:00.2',
- '0000:09:00.3']
-
-# These are DPDK EAL parameters and they may need to be changed depending on
-# hardware configuration, like cpu numbering and NUMA.
-VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0']
-
-VSWITCHD_VANILLA_ARGS = ['--pidfile']
-VSWITCH_VANILLA_PHY_PORT_NAMES = ['', '']
-VSWITCH_VANILLA_KERNEL_MODULES = ['openvswitch']
-
-# directory where hugepages will be mounted on system init
-HUGEPAGE_DIR = '/dev/hugepages'
-
-# Sets OVS PMD core mask to 2 for CPU core 1 affinitization
-VSWITCH_PMD_CPU_MASK = '2'
-VSWITCH_AFFINITIZATION_ON = 1
+RTE_TARGET = 'x86_64-native-linuxapp-gcc'
-VSWITCH_FLOW_TIMEOUT = '30000'
-
-# list of tuples of format (path, module_name), which will be inserted
-# using 'insmod' on system init
-
-# for OVS modules the path is in reference to the OVS directory.
-OVS_MODULES = []
+# list of NIC HWIDs to which traffic generator is connected
+# In case of NIC with SRIOV suport, it is possible to define,
+# which virtual function should be used
+# e.g. value '0000:05:00.0|vf1' will configure two VFs and second VF
+# will be used for testing
+WHITELIST_NICS = ['0000:05:00.0', '0000:05:00.1']
# for DPDK_MODULES the path is in reference to the build directory
+# To use vfio set
+# DPDK_MODULES = [
+# ('vfio-pci'),
+# ]
DPDK_MODULES = [
('kmod', 'igb_uio'),
]
]
# list of modules that will be inserted using 'modprobe' on system init
+# To use vfio set
+# SYS_MODULES = ['cuse']
SYS_MODULES = ['uio', 'cuse']
# vhost character device file used by dpdkvhostport QemuWrap cases
'/tmp/dpdkvhostuser2', '/tmp/dpdkvhostuser3',
'/tmp/myport0', '/tmp/helloworld123', '/tmp/abcstuff0']
+# ############################
+# vswitch configuration
+# ############################
+# These are DPDK EAL parameters and they may need to be changed depending on
+# hardware configuration, like cpu numbering and NUMA.
+#
+# parameters used for legacy DPDK configuration through '--dpdk' option of ovs-vswitchd
+# e.g. ovs-vswitchd --dpdk --socket-mem 1024,0
+VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0']
+
+# options used for new type of OVS configuration via calls to ovs-vsctl
+# e.g. ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
+VSWITCHD_DPDK_CONFIG = {
+ 'dpdk-init' : 'true',
+ 'dpdk-lcore-mask' : '0x4',
+ 'dpdk-socket-mem' : '1024,0',
+}
+# Note: VSPERF will automatically detect, which type of DPDK configuration should
+# be used.
+
+# To enable multi queue modify the below param to the number of queues.
+# 0 = disabled
+VSWITCH_MULTI_QUEUES = 0
+
+# parameters passed to ovs-vswitchd in case that OvsVanilla is selected
+VSWITCHD_VANILLA_ARGS = []
+
+# use full module path to load module matching OVS version built from the source
+VSWITCH_VANILLA_KERNEL_MODULES = ['libcrc32c', 'ip_tunnel', 'vxlan', 'gre', 'nf_conntrack', 'nf_defrag_ipv4', 'nf_defrag_ipv6', os.path.join(OVS_DIR_VANILLA, 'datapath/linux/openvswitch.ko')]
+
+# Bridge name to be used by VSWTICH
+VSWITCH_BRIDGE_NAME = 'br0'
+
+# directory where hugepages will be mounted on system init
+HUGEPAGE_DIR = '/dev/hugepages'
+
+# Sets OVS PMDs core mask to 30 for affinitization to 5th and 6th CPU core.
+# Note that the '0x' notation should not be used.
+VSWITCH_PMD_CPU_MASK = '30'
+VSWITCH_AFFINITIZATION_ON = 1
+
+VSWITCH_FLOW_TIMEOUT = '30000'
+
+# list of tuples of format (path, module_name), which will be inserted
+# using 'insmod' on system init
+
+# for OVS modules the path is in reference to the OVS directory.
+OVS_MODULES = []
+
# log file for ovs-vswitchd
LOG_FILE_VSWITCHD = 'vswitchd.log'
# log file for ovs-dpdk
LOG_FILE_OVS = 'ovs.log'
-VSWITCH_DIR = os.path.join(ROOT_DIR, 'vswitches')
+# default vswitch implementation
VSWITCH = "OvsDpdkVhost"
-
-# Use vhost user or vhost cuse
-# Set to cuse if you want to test vhostcuse
-VHOST_METHOD = 'user'
Code Review / vswitchperf.git / blobdiff