-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# "Name": "phy2phy_burst", # A human-readable string identifying the
# # test.
# "Traffic Type": "rfc2544", # One of the supported traffic types.
+# # It can be overridden by cli option traffic_type.
+# # Default value is "rfc2544".
# "Deployment": "p2p", # One of the supported deployment scenarios.
# "Description": "Lorem ipsum..." # Optional. A human-readable string
# # describing the test.
# "Frame Modification": "vlan" # One of the supported frame modifications:
# # vlan, mpls, mac, dscp, ttl, ip_addr,
# # ip_port.
-# "biDirectional": [true|false], # Specifies if genearted traffic will be
-# # full-duplex (true) or half-duplex (false)
+# "biDirectional": ["True"|"False"]
+# # Specifies if generated traffic will be
+# # full-duplex (True) or half-duplex (False)
+# # It can be overridden by cli option bidirectional.
+# # Default value is "False". Must be of type
+# # string.
# "MultiStream": 0-65535 # Optional. Defines number of flows simulated
# # by traffic generator. Value 0 disables
# # MultiStream feature
+# # It can be overridden by cli option multistream.
+# "Stream Type": ["L2"|"L3"|"L4"] # Optional. Stream Type is an extension
+# # of the "MultiStream" feature. If MultiStream
+# # is disabled, then Stream Type will be ignored.
+# # Stream Type defines ISO OSI network layer
+# # used for simulation of multiple streams.
+# # It can be overridden by cli option stream_type.
+# # Values:
+# # "L2" - iteration of destination MAC address
+# # "L3" - iteration of destination IP address
+# # "L4" - iteration of destination port
+# # of selected transport protocol
+# # Default value is "L4".
+# "Pre-installed Flows": ["Yes"|"No"]
+# # Optional. Pre-installed Flows is an extension
+# # of the "MultiStream" feature. If MultiStream
+# # is disabled, then Pre-installed Flows will be
+# # ignored. It defines if stream specific flows
+# # will be inserted into OVS or not.
+# # It can be overridden by cli option
+# # pre-installed_flows
+# # Values:
+# # "Yes" - flows will be inserted into OVS
+# # "No" - flows won't be inserted into OVS
+# # Default value is "No".
# "Flow Type": ["port"|"IP"] # Optional. Defines flows complexity. In case
# # it isn't specified, then "port" will be used.
# # Values:
# # "port" - flow is defined by ingress ports
# # "IP" - flow is defined by ingress ports
# # and src and dst IP addresses
+# "iLoad": 0-100 # Optional. Defines desired percentage
+# # of frame rate used during continuous stream
+# # tests. Can be overridden by cli option
+# # iload.
+# # Default value is 100.
# "Load": dictionary # Optional. Configures background load
# # during testcase execution.
# Description of "Load" dictionary keys, their meanings and available values:
# # value will be used
# "options": "" # Optional. Additional command line options
# # to be passed to the load generator.
+# "vSwitch" : "OvsVanilla" # Defines vSwitch to be used for test execution.
+# # It will override any VSWITCH option stated
+# # in configuration files or value specified
+# # on command line through --vswitch parameter.
+# "VNF" : "QemuVirtioNet" # Defines VNF to be used for test execution.
+# # It will override any VNF option stated
+# # in configuration files or value specified
+# # on command line through --vnf parameter.
+# "Trafficgen" : "Dummy" # Defines traffic generator to be used for test
+# # execution. It will override any VNF option
+# # stated in configuration files or value
+# # specified on command line through --trafficgen
+# # parameter.
+# "Parameters" : "pkt_sizes=512" # Defines list of test parameters used for test
+# # execution. It will override any values defined
+# # by TEST_PARAMS option stated in configuration
+# # files or values specified on command line through
+# # --test-params parameter.
# "Test Modifier": [FrameMod|Other],
# "Dependency": [Test_Case_Name |None],
"Name": "phy2phy_cont",
"Traffic Type": "continuous",
"Deployment": "p2p",
- "Description": "RFC2544 Phy2Phy Continuous Stream",
+ "Description": "Phy2Phy Continuous Stream",
+ "biDirectional": "True",
+ "iLoad": "100",
+ },
+ {
+ "Name": "pvp_cont",
+ "Traffic Type": "continuous",
+ "Deployment": "pvp",
+ "Description": "PVP Continuous Stream",
+ "biDirectional": "True",
+ "iLoad": "100",
+ },
+ {
+ "Name": "pvvp_cont",
+ "Traffic Type": "continuous",
+ "Deployment": "pvvp",
+ "Description": "PVVP Continuous Stream",
"biDirectional": "True",
+ "iLoad": "100",
},
{
"Name": "phy2phy_scalability",
"Traffic Type": "rfc2544",
"Deployment": "p2p",
"biDirectional": "True",
- "Description": "LTD.Scalability.RFC2544.0PacketLoss",
+ "Description": "LTD.Scalability.Flows.RFC2544.0PacketLoss",
"MultiStream": "8000",
},
{