-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# "Name": "phy2phy_burst", # A human-readable string identifying the
# # test.
# "Traffic Type": "rfc2544", # One of the supported traffic types.
-# "Collector": "cpu, memory", # Comma-separated list of Collectors to
-# # be activated during this test.
+# # It can be overridden by cli option traffic_type.
+# # Default value is "rfc2544".
# "Deployment": "p2p", # One of the supported deployment scenarios.
# "Description": "Lorem ipsum..." # Optional. A human-readable string
# # describing the test.
-# "MultiStream": [true|false],
+# "Frame Modification": "vlan" # One of the supported frame modifications:
+# # vlan, mpls, mac, dscp, ttl, ip_addr,
+# # ip_port.
+# "biDirectional": ["True"|"False"]
+# # Specifies if generated traffic will be
+# # full-duplex (True) or half-duplex (False)
+# # It can be overridden by cli option bidirectional.
+# # Default value is "False". Must be of type
+# # string.
+# "MultiStream": 0-65535 # Optional. Defines number of flows simulated
+# # by traffic generator. Value 0 disables
+# # MultiStream feature
+# # It can be overridden by cli option multistream.
+# "Stream Type": ["L2"|"L3"|"L4"] # Optional. Stream Type is an extension
+# # of the "MultiStream" feature. If MultiStream
+# # is disabled, then Stream Type will be ignored.
+# # Stream Type defines ISO OSI network layer
+# # used for simulation of multiple streams.
+# # It can be overridden by cli option stream_type.
+# # Values:
+# # "L2" - iteration of destination MAC address
+# # "L3" - iteration of destination IP address
+# # "L4" - iteration of destination port
+# # of selected transport protocol
+# # Default value is "L4".
+# "Pre-installed Flows": ["Yes"|"No"]
+# # Optional. Pre-installed Flows is an extension
+# # of the "MultiStream" feature. If MultiStream
+# # is disabled, then Pre-installed Flows will be
+# # ignored. It defines if stream specific flows
+# # will be inserted into OVS or not.
+# # It can be overridden by cli option
+# # pre-installed_flows
+# # Values:
+# # "Yes" - flows will be inserted into OVS
+# # "No" - flows won't be inserted into OVS
+# # Default value is "No".
+# "Flow Type": ["port"|"IP"] # Optional. Defines flows complexity. In case
+# # it isn't specified, then "port" will be used.
+# # Values:
+# # "port" - flow is defined by ingress ports
+# # "IP" - flow is defined by ingress ports
+# # and src and dst IP addresses
+# "iLoad": 0-100 # Optional. Defines desired percentage
+# # of frame rate used during continuous stream
+# # tests. Can be overridden by cli option
+# # iload.
+# # Default value is 100.
+# "Load": dictionary # Optional. Configures background load
+# # during testcase execution.
+# Description of "Load" dictionary keys, their meanings and available values:
+#
+# "tool": "stress" # One of the supported load generators.
+# "load": 0-100 # percentage of cores which should be
+# # utilized by load generator
+# # e.g. load = 70%, detected cpu cores = 14 =>
+# # round(14*0.7)=10, i.e. 10 instances of load
+# # generator will be executed
+# "reserved": 0- (Default 0) # Optional. Defines number of cores reserved
+# # for vsperf
+# # e.g. load = 80%, detected cpu cores = 14,
+# # reserved = 4 => round((14-4)*0.8)=8,
+# # i.e. 8 load gen. instances will be executed
+# "pattern" : "c" # stress/stress-ng specific; Number of 'c',
+# # 'm' and 'i' defines ratio between cpu, mem
+# # and io workers respectively
+# # e.g. "ccccmmi" => ratio among workers types
+# # will be 3:2:1, so in case that 12 stress
+# # instances should be executed, then 6 cpu,
+# # 4 memory and 2 io workers will be executed
+# "load_memory": 0-100 # Optional. Defines percentage of the system
+# # memory, which should be utilized by memory
+# # workers (if they are part of "pattern").
+# # if not specified then default stress(-ng)
+# # value will be used
+# "options": "" # Optional. Additional command line options
+# # to be passed to the load generator.
+# "vSwitch" : "OvsVanilla" # Defines vSwitch to be used for test execution.
+# # It will override any VSWITCH option stated
+# # in configuration files or value specified
+# # on command line through --vswitch parameter.
+# "VNF" : "QemuVirtioNet" # Defines VNF to be used for test execution.
+# # It will override any VNF option stated
+# # in configuration files or value specified
+# # on command line through --vnf parameter.
+# "Trafficgen" : "Dummy" # Defines traffic generator to be used for test
+# # execution. It will override any VNF option
+# # stated in configuration files or value
+# # specified on command line through --trafficgen
+# # parameter.
+# "Parameters" : "pkt_sizes=512" # Defines list of test parameters used for test
+# # execution. It will override any values defined
+# # by TEST_PARAMS option stated in configuration
+# # files or values specified on command line through
+# # --test-params parameter.
# "Test Modifier": [FrameMod|Other],
# "Dependency": [Test_Case_Name |None],
{
"Name": "phy2phy_tput",
"Traffic Type": "rfc2544",
+ "Deployment": "p2p",
+ "biDirectional": "True",
+ "Description": "LTD.Throughput.RFC2544.PacketLossRatio",
+ },
+ {
+ "Name": "back2back",
+ "Traffic Type": "back2back",
+ "Deployment": "p2p",
+ "biDirectional": "True",
+ "Description": "LTD.Throughput.RFC2544.BackToBackFrames",
+ },
+ {
+ "Name": "phy2phy_tput_mod_vlan",
+ "Traffic Type": "rfc2544",
+ "Deployment": "p2p",
+ "Frame Modification": "vlan",
+ "biDirectional": "False",
+ "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification"
+ },
+ {
+ "Name": "phy2phy_cont",
+ "Traffic Type": "continuous",
+ "Deployment": "p2p",
+ "Description": "Phy2Phy Continuous Stream",
+ "biDirectional": "True",
+ "iLoad": "100",
+ },
+ {
+ "Name": "pvp_cont",
+ "Traffic Type": "continuous",
+ "Deployment": "pvp",
+ "Description": "PVP Continuous Stream",
+ "biDirectional": "True",
+ "iLoad": "100",
+ },
+ {
+ "Name": "pvvp_cont",
+ "Traffic Type": "continuous",
+ "Deployment": "pvvp",
+ "Description": "PVVP Continuous Stream",
+ "biDirectional": "True",
+ "iLoad": "100",
+ },
+ {
+ "Name": "phy2phy_scalability",
+ "Traffic Type": "rfc2544",
+ "Deployment": "p2p",
+ "biDirectional": "True",
+ "Description": "LTD.Scalability.Flows.RFC2544.0PacketLoss",
+ "MultiStream": "8000",
+ },
+ {
+ "Name": "pvp_tput",
+ "Traffic Type": "rfc2544",
+ "Deployment": "pvp",
+ "Description": "LTD.Throughput.RFC2544.PacketLossRatio",
+ "biDirectional": "True",
+ },
+ {
+ "Name": "pvp_back2back",
+ "Traffic Type": "back2back",
+ "Deployment": "pvp",
+ "Description": "LTD.Throughput.RFC2544.BackToBackFrames",
+ "biDirectional": "True",
+ },
+ {
+ "Name": "pvvp_tput",
+ "Traffic Type": "rfc2544",
"Collector": "cpu",
+ "Deployment": "pvvp",
+ "Description": "LTD.Throughput.RFC2544.PacketLossRatio",
+ "biDirectional": "True",
+ },
+ {
+ "Name": "pvvp_back2back",
+ "Traffic Type": "back2back",
+ "Collector": "cpu",
+ "Deployment": "pvvp",
+ "Description": "LTD.Throughput.RFC2544.BackToBackFrames",
+ "biDirectional": "True",
+ },
+ {
+ "Name": "phy2phy_cpu_load",
+ "Traffic Type": "rfc2544",
"Deployment": "p2p",
- "Description": "RFC2544 Throughput Phy2Phy Loopback",
+ "biDirectional": "True",
+ "Description": "LTD.CPU.RFC2544.0PacketLoss",
+ "Load" : {
+ "tool" : "stress-ng",
+ "load" : 100,
+ "reserved" : 4,
+ "pattern" : "c",
+ }
},
+ {
+ "Name": "phy2phy_mem_load",
+ "Traffic Type": "rfc2544",
+ "Deployment": "p2p",
+ "biDirectional": "True",
+ "Description": "LTD.Memory.RFC2544.0PacketLoss",
+ "Load" : {
+ "tool" : "stress-ng",
+ "load" : 50,
+ "pattern" : "m",
+ "load_memory" : 80,
+ }
+ },
+
]