test_type=$1
test_name=$2
ftrace_enable=0
-cyclictest_env_verify=("idle_idle" "cpustress_idle" "memorystress_idle" "iostress_idle") #cyclictest environment
+cyclictest_env_verify=("idle_idle" "memorystress_idle") #cyclictest environment
cyclictest_env_daily=("idle_idle" "cpustress_idle" "memorystress_idle" "iostress_idle")
cyclictest_result=0 #exit code of cyclictest
packetforward_result=0 #exit code of packet forward
source $WORKSPACE/ci/envs/host-config
function packetForward {
-# source $WORKSPACE/ci/packet_forward_test.sh $HOST_IP
- echo "Packetforwarding need to be implemented"
- packetforward_result=$?
- if [ ${packetforward_result} -ne 0 ];then
- echo "Packet Forwarding test case execution FAILED"
+ #executing packet forwarding test cases based on the job type.
+ if [ ${test_type} == "verify" ];then
+ echo "packet forwarding test cases are not yet implemented for verify job"
+ packetforward_result=0
+ elif [ ${test_type} == "daily" ];then
+ source $WORKSPACE/ci/cyclicTestTrigger.sh $HOST_IP
+ connect_host
+ #Waiting for ssh to be available for the host machine.
+ sleep 20
+ # copy files and rpms and setup environment required for executing test cases
+ setUpPacketForwarding
+ sleep 1
+ #Verifying whether the test node is up and running
+ connect_host
+ sleep 20
+ #Install and Execute packet forwarding test cases
+ runPacketForwarding $test_type
+ packetforward_result=$?
else
- echo "Packet Forwarding test case executed SUCCESSFULLY"
+ echo "Incorrect test type ${test_type}"
+ exit 1
fi
- host_clean
+}
+
+function getTestParams {
+ HOST_IP=$( setHostIP $test_type )
+ test_time=$( setTestTime $test_type )
}
function cyclictest {
test_case=$1
source $WORKSPACE/ci/cyclicTestTrigger.sh $HOST_IP $test_time $test_type $test_case
+ #Verifying whether the test node is up and running
+ connect_host
+ #Waiting for ssh to be available for the host machine.
+ sleep 20
#calculating and verifying sha512sum of the guestimage.
if ! verifyGuestImage;then
exit 1
fi
#Update kvmfornfv_cyclictest_${testName}.yaml with test_time and pod.yaml with IP
updateYaml
- #Cleaning up the test environment before running cyclictest through yardstick.
+ #Running PCM utility
+ collect_MBWInfo $test_type
+ #Cleaning the environment before running cyclictest through yardstick
env_clean
#Creating a docker image with yardstick installed and launching ubuntu docker to run yardstick cyclic testcase
- if runCyclicTest;then
+ if runCyclicTest ${ftrace_enable};then
cyclictest_result=`expr ${cyclictest_result} + 0`
else
echo "Test case execution FAILED for ${test_case} environment"
cyclictest_result=`expr ${cyclictest_result} + 1`
fi
+ echo "Terminating PCM Process"
+ sudo ssh root@${HOST_IP} "pid=\$(ps aux | grep 'pcm' | awk '{print \$2}' | head -1); echo \$pid |xargs kill -SIGTERM"
}
-
-function ftrace_disable {
- sudo ssh root@${HOST_IP} "sh /root/workspace/scripts/disbale-trace.sh"
- sudo ssh root@${HOST_IP} "cd /tmp ; a=\$(ls -rt | tail -1) ; echo \$a ; mv \$a cyclictest_${env}.txt"
- sudo mkdir -p $WORKSPACE/build_output/log/kernel_trace
- sudo scp root@${HOST_IP}:/tmp/cyclictest_${env}.txt $WORKSPACE/build_output/log/kernel_trace/
+#Collecting the Memory Bandwidth Information using pcm-memory utility
+function collect_MBWInfo {
+ testType=$1
+ timeStamp=$(date +%Y%m%d%H%M%S)
+ echo "Running PCM memory to collect memory bandwidth"
+ sudo ssh root@${HOST_IP} "mkdir -p /root/MBWInfo"
+ sudo ssh root@${HOST_IP} "${pcm_memory} 60 &>/root/MBWInfo/MBWInfo_${testType}_${timeStamp} &disown"
+}
+function install_pcm {
+ sudo ssh root@${HOST_IP} '
+ modelName=`cat /proc/cpuinfo | grep -i "model name" | uniq`
+ if echo "$modelName" | grep -i "xeon" ;then
+ echo "pcm utility supports $modelName processor"
+ else
+ echo "check for the pcm utility supported processors"
+ exit 1
+ fi
+ cd /root
+ if [ ! -d "pcm" ]; then
+ `git clone https://github.com/opcm/pcm`
+ cd pcm
+ make
+ echo "Disabling NMI Watchdog"
+ echo 0 > /proc/sys/kernel/nmi_watchdog
+ echo "To Access MSR registers installing msr-tools"
+ sudo yum install msr-tools
+ sudo modprobe msr
+ fi
+ '
}
#Execution of testcases based on test type and test name from releng.
if [ ${test_type} == "verify" ];then
- HOST_IP="10.10.100.21"
- test_time=120000 # 2m
+ getTestParams
+ install_pcm
if [ ${ftrace_enable} -eq '1' ]; then
for env in ${cyclictest_env_verify[@]}
do
#Enabling ftrace for kernel debugging.
- sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' kvmfornfv_cyclictest_hostenv_guestenv.yaml
+ sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' $WORKSPACE/tests/kvmfornfv_cyclictest_hostenv_guestenv.yaml
#Executing cyclictest through yardstick.
cyclictest ${env}
- #disabling ftrace and collecting the logs to upload to artifact repository.
- ftrace_disable
sleep 10
done
#Execution of packet forwarding test cases.
#Execution of packet forwarding test cases.
packetForward
fi
- if [ ${cyclictest_result} -ne 0 ] || [ ${packetforward_result} -ne 0 ];then
- echo "Test case FAILED"
- err_exit 1
- else
- err_exit 0
- fi
+ if [ ${cyclictest_result} -ne 0 ] || [ ${packetforward_result} -ne 0 ];then
+ echo "Test case FAILED"
+ test_exit 1
+ else
+ test_exit 0
+ fi
elif [ ${test_type} == "daily" ];then
- HOST_IP="10.10.100.22"
- test_time=3600000 #1h
+ echo "Daily job test cases execution disabled temporarily"
+ exit 0
+ getTestParams
+ install_pcm
if [ ${test_name} == "packet_forward" ];then
packetForward
+ packet_fwd_logs
+ #clean the test environment after the test case execution.
+ sudo ssh root@${HOST_IP} "rm -rf /root/workspace/*"
+ host_clean
if [ ${packetforward_result} -ne 0 ] ; then
- err_exit 1
+ echo "Execution of packet forwarding test cases FAILED"
+ packet_fwd_exit 1
else
- err_exit 0
+ echo "Executed packet forwarding test cases SUCCESSFULLY"
+ packet_fwd_exit 0
fi
elif [ ${test_name} == "cyclictest" ];then
if [ ${ftrace_enable} -eq '1' ]; then
sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' kvmfornfv_cyclictest_hostenv_guestenv.yaml
#Executing cyclictest through yardstick.
cyclictest ${env}
- #disabling ftrace and collecting the logs to upload to artifact repository.
+ #disabling ftrace and collecting the logs to upload to artifact repository.
ftrace_disable
sleep 5
done
fi
if [ ${cyclictest_result} -ne 0 ] ; then
echo "Cyclictest case execution FAILED"
- err_exit 1
+ test_exit 1
else
echo "Cyclictest case executed SUCCESSFULLY"
- err_exit 0
+ test_exit 0
fi
fi
elif [ ${test_type} == "merge" ];then