#!/bin/bash
-#############################################################
-## !!! The original test_kvmfornfv.sh is removed because it
-## break the verification process!!!
-#############################################################
-## This script will launch ubuntu docker container
-## runs cyclictest through yardstick
-## and verifies the test results.
+############################################################
+## This script is an interface to trigger the
+## cyclicTestTrigger.sh for test type like patch verification,
+## daily testing.
+## Releng will trigger this script by passing test type as
+## verify/daily and test name as idle_idle/stress_idle/
+## packet_forward as arguments.
+## Verify Job runs idle_idle,packet_forward test
+## daily job runs base on the test name parameter
############################################################
+test_type=$1
+test_name=$2
+ftrace_enable=0
+cyclictest_env_verify=("idle_idle" "memorystress_idle") #cyclictest environment
+cyclictest_env_daily=("idle_idle" "cpustress_idle" "memorystress_idle" "iostress_idle")
+cyclictest_result=0 #exit code of cyclictest
+packetforward_result=0 #exit code of packet forward
+source $WORKSPACE/ci/envs/host-config
-function env_clean {
- container_id=`sudo docker ps -a | grep kvmfornfv |awk '{print $1}'`
- sudo docker rm $container_id
- sudo ssh root@10.2.117.23 "rm -rf /root/workspace/*"
- sudo ssh root@10.2.117.23 "pid=\$(ps aux | grep 'qemu' | awk '{print \$2}' | head -1); echo \$pid |xargs kill"
- sudo rm -rf /tmp/kvmtest-*
-}
-
-#Cleaning up the test environment before running cyclictest through yardstick.
-env_clean
-
-time_stamp=$(date +%Y%m%d%H%M%S)
-volume=/tmp/kvmtest-${time_stamp}
-mkdir -p $volume/{image,rpm,scripts}
+#check if any kernel rpms available for testing
+rpm_count=`ls -1 $WORKSPACE/build_output/*.rpm 2>/dev/null | wc -l`
+if [ $rpm_count = 0 ];then
+ echo "This patch is used for building kernel debian packages required by compass installer and \
+the test environment for testing debain packages is not available"
+ exit 0
+fi
-#copying required files to run yardstick cyclic testcase
-mv $WORKSPACE/build_output/kernel-4.4*.rpm $volume/rpm
-cp -r $WORKSPACE/ci/envs/* $volume/scripts
-cp -r $WORKSPACE/tests/cyclictest-node-context.yaml $volume
-cp -r $WORKSPACE/tests/pod.yaml $volume
+function packetForward {
+ #executing packet forwarding test cases based on the job type.
+ if [ ${test_type} == "verify" ];then
+ echo "packet forwarding test cases are not yet implemented for verify job"
+ packetforward_result=0
+ elif [ ${test_type} == "daily" ];then
+ source $WORKSPACE/ci/cyclicTestTrigger.sh $HOST_IP
+ connect_host
+ #Waiting for ssh to be available for the host machine.
+ sleep 20
+ # copy files and rpms and setup environment required for executing test cases
+ setUpPacketForwarding
+ sleep 1
+ #Verifying whether the test node is up and running
+ connect_host
+ sleep 20
+ #Install and Execute packet forwarding test cases
+ runPacketForwarding $test_type
+ packetforward_result=$?
+ else
+ echo "Incorrect test type ${test_type}"
+ exit 1
+ fi
+}
-#Launching ubuntu docker container to run yardstick
-sudo docker run -i -v $volume:/opt --net=host --name kvmfornfv \
-kvmfornfv:latest /bin/bash -c "cd /opt/scripts && ls; ./cyclictest.sh"
+function getTestParams {
+ HOST_IP=$( setHostIP $test_type )
+ test_time=$( setTestTime $test_type )
+}
-#Verifying the results of cyclictest
-result=`grep -o '"errors":[^,]*' $volume/yardstick.out | awk -F '"' '{print $4}'`
+function cyclictest {
+ test_case=$1
+ source $WORKSPACE/ci/cyclicTestTrigger.sh $HOST_IP $test_time $test_type $test_case
+ #Verifying whether the test node is up and running
+ connect_host
+ #Waiting for ssh to be available for the host machine.
+ sleep 20
+ #calculating and verifying sha512sum of the guestimage.
+ if ! verifyGuestImage;then
+ exit 1
+ fi
+ #Update kvmfornfv_cyclictest_${testName}.yaml with test_time and pod.yaml with IP
+ updateYaml
+ #Running PCM utility
+ collect_MBWInfo $test_type
+ #Cleaning the environment before running cyclictest through yardstick
+ env_clean
+ #Creating a docker image with yardstick installed and launching ubuntu docker to run yardstick cyclic testcase
+ if runCyclicTest ${ftrace_enable};then
+ cyclictest_result=`expr ${cyclictest_result} + 0`
+ else
+ echo "Test case execution FAILED for ${test_case} environment"
+ cyclictest_result=`expr ${cyclictest_result} + 1`
+ fi
+ echo "Terminating PCM Process"
+ sudo ssh root@${HOST_IP} "pid=\$(ps aux | grep 'pcm' | awk '{print \$2}' | head -1); echo \$pid |xargs kill -SIGTERM"
+}
+#Collecting the Memory Bandwidth Information using pcm-memory utility
+function collect_MBWInfo {
+ testType=$1
+ timeStamp=$(date +%Y%m%d%H%M%S)
+ echo "Running PCM memory to collect memory bandwidth"
+ sudo ssh root@${HOST_IP} "mkdir -p /root/MBWInfo"
+ sudo ssh root@${HOST_IP} "${pcm_memory} 60 &>/root/MBWInfo/MBWInfo_${testType}_${timeStamp} &disown"
+}
+function install_pcm {
+ sudo ssh root@${HOST_IP} '
+ modelName=`cat /proc/cpuinfo | grep -i "model name" | uniq`
+ if echo "$modelName" | grep -i "xeon" ;then
+ echo "pcm utility supports $modelName processor"
+ else
+ echo "check for the pcm utility supported processors"
+ exit 1
+ fi
+ cd /root
+ if [ ! -d "pcm" ]; then
+ `git clone https://github.com/opcm/pcm`
+ cd pcm
+ make
+ echo "Disabling NMI Watchdog"
+ echo 0 > /proc/sys/kernel/nmi_watchdog
+ echo "To Access MSR registers installing msr-tools"
+ sudo yum install msr-tools
+ sudo modprobe msr
+ fi
+ '
+}
-if [ -z "$result" ]; then
- echo "####################################################"
- echo ""
- echo `grep -o '"data":[^}]*' $volume/yardstick.out | awk -F '{' '{print $2}'`
- echo ""
- echo "####################################################"
- env_clean
- exit 0
+#Execution of testcases based on test type and test name from releng.
+if [ ${test_type} == "verify" ];then
+ getTestParams
+ install_pcm
+ if [ ${ftrace_enable} -eq '1' ]; then
+ for env in ${cyclictest_env_verify[@]}
+ do
+ #Enabling ftrace for kernel debugging.
+ sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' $WORKSPACE/tests/kvmfornfv_cyclictest_hostenv_guestenv.yaml
+ #Executing cyclictest through yardstick.
+ cyclictest ${env}
+ sleep 10
+ done
+ #Execution of packet forwarding test cases.
+ packetForward
+ else
+ for env in ${cyclictest_env_verify[@]}
+ do
+ #Executing cyclictest through yardstick.
+ cyclictest ${env}
+ sleep 10
+ done
+ #Execution of packet forwarding test cases.
+ packetForward
+ fi
+ if [ ${cyclictest_result} -ne 0 ] || [ ${packetforward_result} -ne 0 ];then
+ echo "Test case FAILED"
+ test_exit 1
+ else
+ test_exit 0
+ fi
+elif [ ${test_type} == "daily" ];then
+ echo "Daily job test cases execution disabled temporarily"
+ exit 0
+ getTestParams
+ install_pcm
+ if [ ${test_name} == "packet_forward" ];then
+ packetForward
+ packet_fwd_logs
+ #clean the test environment after the test case execution.
+ sudo ssh root@${HOST_IP} "rm -rf /root/workspace/*"
+ host_clean
+ if [ ${packetforward_result} -ne 0 ] ; then
+ echo "Execution of packet forwarding test cases FAILED"
+ packet_fwd_exit 1
+ else
+ echo "Executed packet forwarding test cases SUCCESSFULLY"
+ packet_fwd_exit 0
+ fi
+ elif [ ${test_name} == "cyclictest" ];then
+ if [ ${ftrace_enable} -eq '1' ]; then
+ for env in ${cyclictest_env_daily[@]}
+ do
+ #Enabling ftrace for kernel debugging.
+ sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' kvmfornfv_cyclictest_hostenv_guestenv.yaml
+ #Executing cyclictest through yardstick.
+ cyclictest ${env}
+ #disabling ftrace and collecting the logs to upload to artifact repository.
+ ftrace_disable
+ sleep 5
+ done
+ else
+ for env in ${cyclictest_env_daily[@]}
+ do
+ #Executing cyclictest through yardstick.
+ cyclictest ${env}
+ sleep 5
+ done
+ fi
+ if [ ${cyclictest_result} -ne 0 ] ; then
+ echo "Cyclictest case execution FAILED"
+ test_exit 1
+ else
+ echo "Cyclictest case executed SUCCESSFULLY"
+ test_exit 0
+ fi
+ fi
+elif [ ${test_type} == "merge" ];then
+ echo "Test is not enabled for ${test_type}"
+ exit 0
else
- echo "Testcase failed"
- echo `grep -o '"errors":[^,]*' ${volume}/yardstick.out | awk -F '"' '{print $4}'`
- env_clean
- exit 1
+ echo "Incorrect test type ${test_type}"
fi