test_type=$1
test_name=$2
ftrace_enable=0
-cyclictest_env_verify=("idle_idle" "cpustress_idle" "memorystress_idle" "iostress_idle") #cyclictest environment
+cyclictest_env_verify=("idle_idle" "memorystress_idle") #cyclictest environment
cyclictest_env_daily=("idle_idle" "cpustress_idle" "memorystress_idle" "iostress_idle")
cyclictest_result=0 #exit code of cyclictest
packetforward_result=0 #exit code of packet forward
+lm_env_verify=("peer-peer" "local")
+livemigration_result=0 #exit code of livemigration
source $WORKSPACE/ci/envs/host-config
+#check if any kernel rpms available for testing
+rpm_count=`ls -1 $WORKSPACE/build_output/*.rpm 2>/dev/null | wc -l`
+if [ $rpm_count = 0 ];then
+ echo "This patch is used for building kernel debian packages required by compass installer and \
+the test environment for testing debain packages is not available"
+ exit 0
+fi
+
function packetForward {
#executing packet forwarding test cases based on the job type.
if [ ${test_type} == "verify" ];then
fi
}
+function liveMigration {
+ #executing live migration test case on the host machine
+ test_env=$1
+ test_name=livemigration
+ echo "Test Environment ${test_env}"
+ if [ ${test_env} == "peer-peer" ];then
+ echo "live migration is not implemented for peer to peer"
+ elif [ ${test_env} == "local" ];then
+ source $WORKSPACE/ci/cyclicTestTrigger.sh $HOST_IP
+ connect_host
+ env_clean
+ #Waiting for ssh to be available for the host machine.
+ sleep 20
+ if runLiveMigration ${test_env} ${test_name};then
+ livemigration_result=`expr ${livemigration_result} + 0`
+ else
+ echo "live migration test case failed"
+ livemigration_result=`expr ${livemigration_result} + 1`
+ fi
+ else
+ echo "Incorrect test environment for live migration"
+ exit 1
+ fi
+}
+
+function getTestParams {
+ HOST_IP=$( setHostIP $test_type )
+ test_time=$( setTestTime $test_type )
+}
+
function cyclictest {
test_case=$1
+ test_name=cyclictest
source $WORKSPACE/ci/cyclicTestTrigger.sh $HOST_IP $test_time $test_type $test_case
#Verifying whether the test node is up and running
connect_host
#Cleaning the environment before running cyclictest through yardstick
env_clean
#Creating a docker image with yardstick installed and launching ubuntu docker to run yardstick cyclic testcase
- if runCyclicTest;then
+ if runCyclicTest ${ftrace_enable} ${test_name};then
cyclictest_result=`expr ${cyclictest_result} + 0`
else
echo "Test case execution FAILED for ${test_case} environment"
echo "Terminating PCM Process"
sudo ssh root@${HOST_IP} "pid=\$(ps aux | grep 'pcm' | awk '{print \$2}' | head -1); echo \$pid |xargs kill -SIGTERM"
}
+#Collecting the Memory Bandwidth Information using pcm-memory utility
function collect_MBWInfo {
- #Collecting the Memory Bandwidth Information using pcm-memory utility
- source $WORKSPACE/ci/envs/host-config
testType=$1
timeStamp=$(date +%Y%m%d%H%M%S)
echo "Running PCM memory to collect memory bandwidth"
sudo ssh root@${HOST_IP} "${pcm_memory} 60 &>/root/MBWInfo/MBWInfo_${testType}_${timeStamp} &disown"
}
function install_pcm {
- source $WORKSPACE/ci/envs/host-config
sudo ssh root@${HOST_IP} '
modelName=`cat /proc/cpuinfo | grep -i "model name" | uniq`
if echo "$modelName" | grep -i "xeon" ;then
'
}
-function ftrace_disable {
- sudo ssh root@${HOST_IP} "sh /root/workspace/scripts/disbale-trace.sh"
- sudo ssh root@${HOST_IP} "cd /tmp ; a=\$(ls -rt | tail -1) ; echo \$a ; mv \$a cyclictest_${env}.txt"
- sudo mkdir -p $WORKSPACE/build_output/log/kernel_trace
- sudo scp root@${HOST_IP}:/tmp/cyclictest_${env}.txt $WORKSPACE/build_output/log/kernel_trace/
-}
-
#Execution of testcases based on test type and test name from releng.
if [ ${test_type} == "verify" ];then
- HOST_IP="10.10.100.21"
- test_time=1000 # 1s
+ getTestParams
install_pcm
if [ ${ftrace_enable} -eq '1' ]; then
for env in ${cyclictest_env_verify[@]}
do
#Enabling ftrace for kernel debugging.
- sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' kvmfornfv_cyclictest_hostenv_guestenv.yaml
+ sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' $WORKSPACE/tests/kvmfornfv_cyclictest_hostenv_guestenv.yaml
#Executing cyclictest through yardstick.
cyclictest ${env}
- #disabling ftrace and collecting the logs to upload to artifact repository.
- ftrace_disable
sleep 10
done
#Execution of packet forwarding test cases.
done
#Execution of packet forwarding test cases.
packetForward
+ for envi in ${lm_env_verify[@]}
+ do
+ echo "Executing Live Migration on the node"
+ liveMigration ${envi}
+ done
fi
- if [ ${cyclictest_result} -ne 0 ] || [ ${packetforward_result} -ne 0 ];then
+ if [ ${cyclictest_result} -ne 0 ] || [ ${packetforward_result} -ne 0 ] || [ ${livemigration_result} -ne 0 ];then
echo "Test case FAILED"
test_exit 1
else
test_exit 0
fi
elif [ ${test_type} == "daily" ];then
- HOST_IP="10.10.100.22"
- test_time=3600000 #1h
+ getTestParams
install_pcm
if [ ${test_name} == "packet_forward" ];then
packetForward
sed -i '/host-setup1.sh/a\ \- \"enable-trace.sh\"' kvmfornfv_cyclictest_hostenv_guestenv.yaml
#Executing cyclictest through yardstick.
cyclictest ${env}
- #disabling ftrace and collecting the logs to upload to artifact repository.
+ #disabling ftrace and collecting the logs to upload to artifact repository.
ftrace_disable
sleep 5
done
echo "Cyclictest case executed SUCCESSFULLY"
test_exit 0
fi
+ elif [ ${test_name} == "livemigration" ];then
+ for envi in ${lm_env_verify[@]}
+ do
+ echo "Executing Live Migration on the node"
+ liveMigration ${envi}
+ done
+ sudo ssh root@${HOST_IP} "rm -rf /root/workspace/*"
+ host_clean
+ if [ ${livemigration_result} -ne 0 ] ; then
+ echo "livemigration test case execution FAILED"
+ test_exit 1
+ else
+ echo "livemigration test case executed SUCCESSFULLY"
+ test_exit 0
+ fi
fi
elif [ ${test_type} == "merge" ];then
echo "Test is not enabled for ${test_type}"