;;
'ha' )
cp odl/juju-deployer/ovs-odl-ha.yaml ./bundles.yaml
- juju-deployer -d -r 13 -c bundles.yaml openstack-phase1
;;
'tip' )
cp odl/juju-deployer/ovs-odl-tip.yaml ./bundles.yaml
+ cp odl/juju-deployer/source/* ./
+ sed -i -- "s|branch: master|branch: stable/$2|g" ./*.yaml
;;
* )
cp odl/juju-deployer/ovs-odl.yaml ./bundles.yaml
case "$3" in
'orangepod2' )
- sed -i -- 's/10.4.1.1/192.168.2.2/g' ./bundles.yaml
+ cp maas/orange/pod2/control-interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
+ cp maas/orange/pod2/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
+ cp maas/orange/pod2/compute-interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
+ cp maas/orange/pod2/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.2.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 192.168.12.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "eth1"/g' ./bundles.yaml
+ ;;
+ 'intelpod6' )
+ cp maas/intel/pod6/interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
+ cp maas/intel/pod6/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
+ cp maas/intel/pod6/interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
+ cp maas/intel/pod6/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "brPublic"/g' ./bundles.yaml
+ ;;
+ 'intelpod5' )
+ cp maas/intel/pod5/interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
+ cp maas/intel/pod5/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
+ cp maas/intel/pod5/interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
+ cp maas/intel/pod5/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "brPublic"/g' ./bundles.yaml
+ ;;
+ 'attvirpod1' )
+ cp maas/att/virpod1/interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
+ cp maas/att/virpod1/interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
+ cp maas/att/virpod1/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
+ cp maas/att/virpod1/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.1.1/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/# "ext-port": "eth1"/ "ext-port": "eth1"/g' ./bundles.yaml
;;
esac
echo "... Deployment Started ...."
-
-#case openstack kilo with odl
-juju-deployer -d -r 13 -c bundles.yaml trusty-"$2"
+case "$1" in
+ 'nonha' )
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"
+ ;;
+ 'ha' )
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"
+ ;;
+ 'tip' )
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"
+ ;;
+ * )
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -c bundles.yaml trusty-"$2"
+ ;;
+esac
echo "... Deployment finished ...."