#!/bin/bash
+##############################################################################
+# Copyright (c) 2015 Tim Rozet (Red Hat), Dan Radez (Red Hat) and others.
+#
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
# Deploy script to install provisioning server for OPNFV Apex
# author: Dan Radez (dradez@redhat.com)
fi
vm_index=4
-ha_enabled="TRUE"
+interactive="FALSE"
ping_site="8.8.8.8"
ntp_server="pool.ntp.org"
net_isolation_enabled="TRUE"
post_config="TRUE"
+debug="FALSE"
declare -i CNT
declare UNDERCLOUD
for entry in $inventory; do
if echo $entry | grep -Eo "^nodes_node[0-9]+_" > /dev/null; then
this_node=$(echo $entry | grep -Eo "^nodes_node[0-9]+_")
- if [[ $inventory_list != *"$this_node"* ]]; then
+ if [[ "$inventory_list" != *"$this_node"* ]]; then
inventory_list+="$this_node "
fi
fi
node_total=$node_count
- if [[ "$node_total" -lt 5 && ha_enabled == "TRUE" ]]; then
+ if [[ "$node_total" -lt 5 && ( ha_enabled == "TRUE" || "$ha_enabled" == "true" ) ]]; then
echo -e "${red}ERROR: You must provide at least 5 nodes for HA baremetal deployment${reset}"
exit 1
elif [[ "$node_total" -lt 2 ]]; then
for network in ${OPNFV_NETWORK_TYPES}; do
ovs-vsctl list-br | grep ${NET_MAP[$network]} > /dev/null || ovs-vsctl add-br ${NET_MAP[$network]}
- virsh net-list --all | grep ${NET_MAP[$network]} > /dev/null || virsh net-create $CONFIG/${NET_MAP[$network]}-net.xml
+ virsh net-list --all | grep ${NET_MAP[$network]} > /dev/null || virsh net-define $CONFIG/${NET_MAP[$network]}-net.xml
virsh net-list | grep -E "${NET_MAP[$network]}\s+active" > /dev/null || virsh net-start ${NET_MAP[$network]}
done
sed -i 's#^.*Controller::Net::SoftwareConfig:.*$# OS::TripleO::Controller::Net::SoftwareConfig: nics/controller'${nic_ext}'.yaml#' $1
# check for ODL L3
- if [ ${deploy_options_array['sdn_l3']} == 'true' ]; then
+ if [ "${deploy_options_array['sdn_l3']}" == 'true' ]; then
nic_ext+=_br-ex
fi
+ if [ "${deploy_options_array['sdn_controller']}" == 'onos' ]; then
+ nic_ext+=_no-public-ip
+ fi
+
# set nics appropriately
sed -i 's#^.*Compute::Net::SoftwareConfig:.*$# OS::TripleO::Compute::Net::SoftwareConfig: nics/compute'${nic_ext}'.yaml#' $1
sudo sed -i '/CephMonKey:/c\\ CephMonKey: \\x27'"\$(ceph-authtool --gen-print-key)"'\\x27' /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml
sudo sed -i '/CephAdminKey:/c\\ CephAdminKey: \\x27'"\$(ceph-authtool --gen-print-key)"'\\x27' /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml
+# we assume that packages will not need to be updated with undercloud install
+# and that it will be used only to configure the undercloud
+# packages updates would need to be handled manually with yum update
+sudo cp -f /usr/share/diskimage-builder/elements/yum/bin/install-packages /usr/share/diskimage-builder/elements/yum/bin/install-packages.bak
+cat << 'EOF' | sudo tee /usr/share/diskimage-builder/elements/yum/bin/install-packages > /dev/null
+#!/bin/sh
+exit 0
+EOF
+
openstack undercloud install &> apex-undercloud-install.log
sleep 30
sudo systemctl restart openstack-glance-api
##preping it for deployment and launch the deploy
##params: none
function undercloud_prep_overcloud_deploy {
- if [[ ${#deploy_options_array[@]} -eq 0 || ${deploy_options_array['sdn_controller']} == 'opendaylight' ]]; then
- if [ ${deploy_options_array['sdn_l3']} == 'true' ]; then
+ if [[ "${#deploy_options_array[@]}" -eq 0 || "${deploy_options_array['sdn_controller']}" == 'opendaylight' ]]; then
+ if [ "${deploy_options_array['sdn_l3']}" == 'true' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_l3.yaml"
+ elif [ "${deploy_options_array['sfc']}" == 'true' ]; then
+ DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_sfc.yaml"
else
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight.yaml"
fi
SDN_IMAGE=opendaylight
- if [ ${deploy_options_array['sfc']} == 'true' ]; then
+ if [ "${deploy_options_array['sfc']}" == 'true' ]; then
SDN_IMAGE+=-sfc
fi
- elif [ ${deploy_options_array['sdn_controller']} == 'opendaylight-external' ]; then
+ elif [ "${deploy_options_array['sdn_controller']}" == 'opendaylight-external' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight-external.yaml"
SDN_IMAGE=opendaylight
- elif [ ${deploy_options_array['sdn_controller']} == 'onos' ]; then
+ elif [ "${deploy_options_array['sdn_controller']}" == 'onos' ]; then
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/onos.yaml"
SDN_IMAGE=opendaylight
- elif [ ${deploy_options_array['sdn_controller']} == 'opencontrail' ]; then
+ elif [ "${deploy_options_array['sdn_controller']}" == 'opencontrail' ]; then
echo -e "${red}ERROR: OpenContrail is currently unsupported...exiting${reset}"
+ exit 1
+ elif [[ -z "${deploy_options_array['sdn_controller']}" || "${deploy_options_array['sdn_controller']}" == 'false' ]]; then
+ echo -e "${blue}INFO: SDN Controller disabled...will deploy nosdn scenario${reset}"
+ SDN_IMAGE=opendaylight
else
echo "${red}Invalid sdn_controller: ${deploy_options_array['sdn_controller']}${reset}"
- echo "${red}Valid choices are opendaylight, opendaylight-external, onos, opencontrail${reset}"
+ echo "${red}Valid choices are opendaylight, opendaylight-external, onos, opencontrail, false, or null${reset}"
exit 1
fi
# make sure ceph is installed
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml"
+ # scale compute nodes according to inventory
+ total_nodes=$(ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "cat /home/stack/instackenv.json | grep -c memory")
+
# check if HA is enabled
- if [[ "$ha_enabled" == "TRUE" ]]; then
- DEPLOY_OPTIONS+=" --control-scale 3 --compute-scale 2"
+ if [[ "$ha_enabled" == "TRUE" || "$ha_enabled" == "true" ]]; then
+ DEPLOY_OPTIONS+=" --control-scale 3"
+ compute_nodes=$((total_nodes - 3))
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/puppet-pacemaker.yaml"
+ else
+ compute_nodes=1
+ fi
+
+ if [ "$compute_nodes" -le 0 ]; then
+ echo -e "${red}ERROR: Invalid number of compute nodes: ${compute_nodes}. Check your inventory file.${reset}"
+ exit 1
+ else
+ echo -e "${blue}INFO: Number of compute nodes set for deployment: ${compute_nodes}${reset}"
+ DEPLOY_OPTIONS+=" --compute-scale ${compute_nodes}"
fi
if [[ "$net_isolation_enabled" == "TRUE" ]]; then
DEPLOY_OPTIONS+=" -e network-environment.yaml"
fi
- if [[ "$ha_enabled" == "TRUE" ]] || [[ "$net_isolation_enabled" == "TRUE" ]]; then
+ if [[ "$ha_enabled" == "TRUE" || "$ha_enabled" == "true" ]] || [[ "$net_isolation_enabled" == "TRUE" ]]; then
DEPLOY_OPTIONS+=" --ntp-server $ntp_server"
fi
echo -e "${blue}INFO: Deploy options set:\n${DEPLOY_OPTIONS}${reset}"
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+if [ "$debug" == 'TRUE' ]; then
+ LIBGUESTFS_BACKEND=direct virt-customize -a overcloud-full.qcow2 --root-password password:opnfvapex
+fi
source stackrc
set -o errexit
echo "Uploading overcloud glance images"
echo "Configuring undercloud and discovering nodes"
openstack baremetal import --json instackenv.json
openstack baremetal configure boot
-if [[ -z "$virtual" ]]; then
-openstack baremetal introspection bulk start
-fi
+#if [[ -z "$virtual" ]]; then
+# openstack baremetal introspection bulk start
+#fi
echo "Configuring flavors"
for flavor in baremetal control compute; do
echo -e "${blue}INFO: Updating flavor: \${flavor}${reset}"
sleep 60 #wait for Hypervisor stats to check-in to nova
# save deploy command so it can be used for debugging
cat > deploy_command << EOF
-openstack overcloud deploy --templates $DEPLOY_OPTIONS
+openstack overcloud deploy --templates $DEPLOY_OPTIONS --timeout 90
EOF
-openstack overcloud deploy --templates $DEPLOY_OPTIONS
EOI
+ if [ "$interactive" == "TRUE" ]; then
+ if ! prompt_user "Overcloud Deployment"; then
+ echo -e "${blue}INFO: User requests exit${reset}"
+ exit 0
+ fi
+ fi
+
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+source stackrc
+set -o errexit
+openstack overcloud deploy --templates $DEPLOY_OPTIONS --timeout 90
+EOI
+
+ if [ "$debug" == 'TRUE' ]; then
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+source overcloudrc
+echo "Keystone Endpoint List:"
+keystone endpoint-list
+echo "Keystone Service List"
+keystone service-list
+cinder quota-show \$(openstack project list | grep admin | awk {'print \$2'})
+EOI
+ fi
}
##Post configuration after install
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
source overcloudrc
set -o errexit
+service_tenant_id=$(keystone tenant-get service 2>/dev/null | grep id | cut -d '|' -f 3)
echo "Configuring Neutron external network"
-neutron net-create external --router:external=True
-neutron subnet-create --name external-net --disable-dhcp external --gateway ${public_network_gateway} --allocation-pool start=${public_network_floating_ip_range%%,*},end=${public_network_floating_ip_range##*,} ${public_network_cidr}
+neutron net-create external --router:external=True --tenant-id $service_tenant_id
+neutron subnet-create --name external-net --tenant-id $service_tenant_id --disable-dhcp external --gateway ${public_network_gateway} --allocation-pool start=${public_network_floating_ip_range%%,*},end=${public_network_floating_ip_range##*,} ${public_network_cidr}
EOI
echo -e "${blue}INFO: Checking if OVS bridges have IP addresses...${reset}"
echo -e "${blue}INFO: Undercloud (instack VM) has been setup to NAT Overcloud public network${reset}"
fi
fi
+
+ # for sfc deployments we need the vxlan workaround
+ if [ "${deploy_options_array['sfc']}" == 'true' ]; then
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+source stackrc
+set -o errexit
+for node in \$(nova list | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+"); do
+ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
+sudo ifconfig br-int up
+sudo ip route add 123.123.123.0/24 dev br-int
+EOF
+done
+EOI
+ fi
+
+ # Collect deployment logs
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+mkdir -p ~/deploy_logs
+rm -rf deploy_logs/*
+source stackrc
+set -o errexit
+for node in \$(nova list | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+"); do
+ ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
+ sudo cp /var/log/messages /home/heat-admin/messages.log
+ sudo chown heat-admin /home/heat-admin/messages.log
+EOF
+scp ${SSH_OPTIONS[@]} heat-admin@\$node:/home/heat-admin/messages.log ~/deploy_logs/\$node.messages.log
+if [ "\$debug" == "TRUE" ]; then
+ nova list --ip \$node
+ echo "---------------------------"
+ echo "-----/var/log/messages-----"
+ echo "---------------------------"
+ cat ~/deploy_logs/\$node.messages.log
+ echo "---------------------------"
+ echo "----------END LOG----------"
+ echo "---------------------------"
+fi
+ ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
+ sudo rm -f /home/heat-admin/messages.log
+EOF
+done
+EOI
+
+ # Print out the dashboard URL
+ source stackrc
+ publicvip=$(heat output-show overcloud PublicVip | sed 's/"//g')
+ echo "Overcloud dashboard available at http://$publicvip/dashboard"
+
}
display_usage() {
echo -e " --no-ha : disable High Availability deployment scheme, this assumes a single controller and single compute node \n"
echo -e " --flat : disable Network Isolation and use a single flat network for the underlay network.\n"
echo -e " --no-post-config : disable Post Install configuration."
+ echo -e " --debug : enable debug output."
+ echo -e " --interactive : enable interactive deployment mode which requires user to confirm steps of deployment."
}
##translates the command line parameters into variables
echo "Post install configuration disabled"
shift 1
;;
+ --debug )
+ debug="TRUE"
+ echo "Enable debug output"
+ shift 1
+ ;;
+ --interactive )
+ interactive="TRUE"
+ echo "Interactive mode enabled"
+ shift 1
+ ;;
*)
display_usage
exit 1
exit 1
fi
- if [[ ! -z "$DEPLOY_SETTINGS_FILE" && ! -f "$DEPLOY_SETTINGS_FILE" ]]; then
- echo -e "${red}ERROR: ${DEPLOY_SETTINGS_FILE} does not exist! Exiting...${reset}"
+ if [[ -z "$DEPLOY_SETTINGS_FILE" || ! -f "$DEPLOY_SETTINGS_FILE" ]]; then
+ echo -e "${red}ERROR: Deploy Settings: ${DEPLOY_SETTINGS_FILE} does not exist! Exiting...${reset}"
exit 1
fi
if [[ ! -z "$NETSETS" && ! -f "$NETSETS" ]]; then
- echo -e "${red}ERROR: ${NETSETS} does not exist! Exiting...${reset}"
+ echo -e "${red}ERROR: Network Settings: ${NETSETS} does not exist! Exiting...${reset}"
exit 1
fi
if [[ ! -z "$INVENTORY_FILE" && ! -f "$INVENTORY_FILE" ]]; then
- echo -e "{$red}ERROR: ${DEPLOY_SETTINGS_FILE} does not exist! Exiting...${reset}"
+ echo -e "{$red}ERROR: Inventory File: ${INVENTORY_FILE} does not exist! Exiting...${reset}"
exit 1
fi
echo -e "${blue}INFO: Post Install Configuration Complete${reset}"
fi
fi
- if [[ ${deploy_options_array['sdn_controller']} == 'onos' ]]; then
+ if [[ "${deploy_options_array['sdn_controller']}" == 'onos' ]]; then
if ! onos_update_gw_mac ${public_network_cidr} ${public_network_gateway}; then
echo -e "${red}ERROR:ONOS Post Install Configuration Failed, Exiting.${reset}"
exit 1