-#!/bin/bash
-set -e
+#!/bin/bash -e
+# shellcheck disable=SC2034,SC2154,SC1090,SC1091
##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
+# Copyright (c) 2017 Ericsson AB, Mirantis Inc., Enea AB and others.
# jonas.bjurel@ericsson.com
# All rights reserved. This program and the accompanying materials
# are made available under the terms of the Apache License, Version 2.0
# http://www.apache.org/licenses/LICENSE-2.0
##############################################################################
-############################################################################
+##############################################################################
# BEGIN of Exit handlers
#
do_exit () {
+ local RC=$?
clean
- echo "Exiting ..."
+ if [ ${RC} -eq 0 ]; then
+ notify "\n[OK] MCP: Openstack installation finished succesfully!\n\n" 2
+ else
+ notify "\n[ERROR] MCP: Openstack installation threw a fatal error!\n\n"
+ fi
}
#
# End of Exit handlers
-############################################################################
+##############################################################################
-############################################################################
+##############################################################################
# BEGIN of usage description
#
usage ()
{
cat << EOF
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-`basename $0`: Deploys the Fuel@OPNFV stack
+$(notify "$(basename "$0"): Deploy the Fuel@OPNFV MCP stack" 3)
-usage: `basename $0` -b base-uri [-B PXE Bridge] [-f] [-F] [-H] -l lab-name -p pod-name -s deploy-scenario [-S image-dir] [-T timeout] -i iso
- -s deployment-scenario [-S optional Deploy-scenario path URI]
- [-R optional local relen repo (containing deployment Scenarios]
+$(notify "USAGE:" 2)
+ $(basename "$0") -b base-uri -l lab-name -p pod-name -s deploy-scenario \\
+ [-B PXE Bridge [-B Mgmt Bridge [-B Internal Bridge [-B Public Bridge]]]] \\
+ [-S storage-dir] [-L /path/to/log/file.tar.gz] \\
+ [-f [-f]] [-F] [-e] [-d] [-D]
-OPTIONS:
+$(notify "OPTIONS:" 2)
-b Base-uri for the stack-configuration structure
- -B PXE Bridge for booting of Fuel master
+ -B Bridge(s): 1st usage = PXE, 2nd = Mgmt, 3rd = Internal, 4th = Public
-d Dry-run
- -f Deploy on existing Fuel master
+ -D Debug logging
-e Do not launch environment deployment
- -F Do only create a Fuel master
+ -f Deploy on existing Salt master (use twice to also skip config sync)
+ -F Do only create a Salt master
-h Print this message and exit
- -H No health check
-l Lab-name
- -L Deployment log path and file name
-p Pod-name
- -s Deploy-scenario short-name/base-file-name
+ -s Deploy-scenario short-name
-S Storage dir for VM images
- -T Timeout, in minutes, for the deploy.
- -i iso url
+ -L Deployment log path and file name
-Description:
-Deploys the Fuel@OPNFV stack on the indicated lab resource
+$(notify "Description:" 2)
+Deploys the Fuel@OPNFV stack on the indicated lab resource.
-This script provides the Fuel@OPNFV deployment abstraction
+This script provides the Fuel@OPNFV deployment abstraction.
It depends on the OPNFV official configuration directory/file structure
and provides a fairly simple mechanism to execute a deployment.
-Input parameters to the build script is:
--b Base URI to the configuration directory (needs to be provided in a URI
- style, it can be a local resource: file:// or a remote resource http(s)://)
--B PXE Bridge for booting of Fuel master. It can be specified several times,
+
+$(notify "Input parameters to the build script are:" 2)
+-b Base URI to the configuration directory (needs to be provided in URI style,
+ it can be a local resource: file:// or a remote resource http(s)://).
+ A POD Descriptor File (PDF) should be available at:
+ <base-uri>/labs/<lab-name>/<pod-name>.yaml
+ The default is './mcp/config'.
+-B Bridges to be used by deploy script. It can be specified several times,
or as a comma separated list of bridges, or both: -B br1 -B br2,br3
- One NIC connected to each specified bridge will be created in the Fuel VM,
- in the same order as provided in the command line. The default is pxebr.
--d Dry-run - Produces deploy config files (config/dea.yaml and
- config/dha.yaml), but does not execute deploy
--f Deploy on existing Fuel master
+ First occurence sets PXE Brige, next Mgmt, then Internal and Public.
+ For an empty value, the deploy script will use virsh to create the default
+ expected network (e.g. -B pxe,,,public will use existing "pxe" and "public"
+ bridges, respectively create "mgmt" and "internal").
+ Note that a virtual network "mcpcontrol" is always created. For virtual
+ deploys, "mcpcontrol" is also used for PXE, leaving the PXE bridge unused.
+ For baremetal deploys, PXE bridge is used for baremetal node provisioning,
+ while "mcpcontrol" is used to provision the infrastructure VMs only.
+ The default is 'pxebr'.
+-d Dry-run - Produce deploy config files, but do not execute deploy
+-D Debug logging - Enable extra logging in sh deploy scripts (set -x)
-e Do not launch environment deployment
--F Do only create a Fuel master
+-f Deploy on existing Salt master. It will skip infrastructure VM creation,
+ but it will still sync reclass configuration from current repo to Salt
+ Master node. If specified twice (e.g. -f -f), config sync will also be
+ skipped.
+-F Do only create a Salt master
-h Print this message and exit
--H Do not run fuel built in health-check after successfull deployment
+-L Deployment log path and name, eg. -L /home/jenkins/job.log.tar.gz
-l Lab name as defined in the configuration directory, e.g. lf
--L Deployment log path and name, eg. -L /home/jenkins/logs/job888.log.tar.gz
--p POD name as defined in the configuration directory, e.g. pod-1
--s Deployment-scenario, this points to a deployment/test scenario file as
- defined in the configuration directory:
- e.g fuel-ocl-heat-ceilometer_scenario_0.0.1.yaml
- or a deployment short-name as defined by scenario.yaml in the deployment
- scenario path.
--S Storage dir for VM images, default is fuel/deploy/images
--T Timeout, in minutes, for the deploy. It defaults to using the DEPLOY_TIMEOUT
- environment variable when defined, or to the default in deploy.py otherwise
--i .iso image to be deployed (needs to be provided in a URI
- style, it can be a local resource: file:// or a remote resource http(s)://)
-
-NOTE: Root priviledges are needed for this script to run
-
-
-Examples:
-sudo `basename $0` -b file:///home/jenkins/lab-config -l lf -p pod1 -s ha_odl-l3_heat_ceilometer -i file:///home/jenkins/myiso.iso
+-p POD name as defined in the configuration directory, e.g. pod2
+-s Deployment-scenario, this points to a short deployment scenario name, which
+ has to be defined in config directory (e.g. os-odl-nofeature-ha).
+-S Storage dir for VM images, default is mcp/deploy/images
+
+$(notify "[NOTE] sudo & virsh priviledges are needed for this script to run" 3)
+
+Example:
+
+$(notify "sudo $(basename "$0") \\
+ -b file:///home/jenkins/securedlab \\
+ -l lf -p pod2 \\
+ -s os-odl-nofeature-ha" 2)
EOF
}
#
# END of usage description
-############################################################################
+##############################################################################
+
+##############################################################################
+# BEGIN of colored notification wrapper
+#
+notify() {
+ tput setaf "${2:-1}" || true
+ echo -en "${1:-"[WARN] Unsupported opt arg: $3\\n"}"
+ tput sgr0
+}
+#
+# END of colored notification wrapper
+##############################################################################
-############################################################################
+##############################################################################
# BEGIN of deployment clean-up
#
clean() {
echo "Cleaning up deploy tmp directories"
- rm -rf ${SCRIPT_PATH}/ISO
}
#
# END of deployment clean-up
-############################################################################
+##############################################################################
-############################################################################
-# BEGIN of shorthand variables for internal use
+##############################################################################
+# BEGIN of variables to customize
#
-SCRIPT_PATH=$(readlink -f $(dirname ${BASH_SOURCE[0]}))
-DEPLOY_DIR=$(cd ${SCRIPT_PATH}/../deploy; pwd)
-PXE_BRIDGE=''
-NO_HEALTH_CHECK=''
-USE_EXISTING_FUEL=''
-FUEL_CREATION_ONLY=''
-NO_DEPLOY_ENVIRONMENT=''
-STORAGE_DIR=''
-DRY_RUN=0
-if ! [ -z $DEPLOY_TIMEOUT ]; then
- DEPLOY_TIMEOUT="-dt $DEPLOY_TIMEOUT"
-else
- DEPLOY_TIMEOUT=""
-fi
+CI_DEBUG=${CI_DEBUG:-0}; [[ "${CI_DEBUG}" =~ (false|0) ]] || set -x
+REPO_ROOT_PATH=$(readlink -f "$(dirname "${BASH_SOURCE[0]}")/..")
+DEPLOY_DIR=$(cd "${REPO_ROOT_PATH}/mcp/scripts"; pwd)
+STORAGE_DIR=$(cd "${REPO_ROOT_PATH}/mcp/deploy/images"; pwd)
+RECLASS_CLUSTER_DIR=$(cd "${REPO_ROOT_PATH}/mcp/reclass/classes/cluster"; pwd)
+DEPLOY_TYPE='baremetal'
+OPNFV_BRIDGES=('pxebr' 'mgmt' 'internal' 'public')
+URI_REGEXP='(file|https?|ftp)://.*'
+BASE_CONFIG_URI="file://${REPO_ROOT_PATH}/mcp/config"
+
+# Customize deploy workflow
+DRY_RUN=${DRY_RUN:-0}
+USE_EXISTING_INFRA=${USE_EXISTING_INFRA:-0}
+INFRA_CREATION_ONLY=${INFRA_CREATION_ONLY:-0}
+NO_DEPLOY_ENVIRONMENT=${NO_DEPLOY_ENVIRONMENT:-0}
+
+source "${DEPLOY_DIR}/globals.sh"
+
#
# END of variables to customize
-############################################################################
+##############################################################################
-############################################################################
+##############################################################################
# BEGIN of main
#
-while getopts "b:B:dfFHl:L:p:s:S:T:i:he" OPTION
+set +x
+OPNFV_BRIDGE_IDX=0
+while getopts "b:B:dDfFl:L:p:s:S:he" OPTION
do
case $OPTION in
b)
BASE_CONFIG_URI=${OPTARG}
- if [[ ! $BASE_CONFIG_URI == file://* ]] && \
- [[ ! $BASE_CONFIG_URI == http://* ]] && \
- [[ ! $BASE_CONFIG_URI == https://* ]] && \
- [[ ! $BASE_CONFIG_URI == ftp://* ]]; then
- echo "-b $BASE_CONFIG_URI - Not given in URI style"
+ if [[ ! $BASE_CONFIG_URI =~ ${URI_REGEXP} ]]; then
+ notify "[ERROR] -b $BASE_CONFIG_URI - invalid URI\n"
usage
exit 1
fi
;;
B)
- for bridge in ${OPTARG//,/ }; do
- PXE_BRIDGE+=" -b $bridge"
+ OIFS=${IFS}
+ IFS=','
+ OPT_BRIDGES=($OPTARG)
+ for bridge in "${OPT_BRIDGES[@]}"; do
+ if [ -n "${bridge}" ]; then
+ OPNFV_BRIDGES[${OPNFV_BRIDGE_IDX}]="${bridge}"
+ fi
+ ((OPNFV_BRIDGE_IDX+=1))
done
+ IFS=${OIFS}
;;
d)
DRY_RUN=1
;;
+ D)
+ CI_DEBUG=1
+ ;;
f)
- USE_EXISTING_FUEL='-nf'
+ ((USE_EXISTING_INFRA+=1))
;;
F)
- FUEL_CREATION_ONLY='-fo'
+ INFRA_CREATION_ONLY=1
;;
e)
- NO_DEPLOY_ENVIRONMENT='-nde'
- ;;
- H)
- NO_HEALTH_CHECK='-nh'
+ NO_DEPLOY_ENVIRONMENT=1
;;
l)
TARGET_LAB=${OPTARG}
;;
L)
- DEPLOY_LOG="-log ${OPTARG}"
+ DEPLOY_LOG="${OPTARG}"
;;
p)
TARGET_POD=${OPTARG}
+ if [[ "${TARGET_POD}" =~ "virtual" ]]; then
+ DEPLOY_TYPE='virtual'
+ fi
;;
s)
DEPLOY_SCENARIO=${OPTARG}
;;
S)
if [[ ${OPTARG} ]]; then
- STORAGE_DIR="-s ${OPTARG}"
- fi
- ;;
- T)
- DEPLOY_TIMEOUT="-dt ${OPTARG}"
- ;;
- i)
- ISO=${OPTARG}
- if [[ ! $ISO == file://* ]] && \
- [[ ! $ISO == http://* ]] && \
- [[ ! $ISO == https://* ]] && \
- [[ ! $ISO == ftp://* ]]; then
- echo "-i $ISO - Not given in URI style"
- usage
- exit 1
+ STORAGE_DIR="${OPTARG}"
fi
;;
h)
exit 0
;;
*)
- echo "${OPTION} is not a valid argument"
- echo "Arguments not according to new argument style"
- echo "Trying old-style compatibility mode"
- pushd ${DEPLOY_DIR} > /dev/null
- python deploy.py "$@"
- popd > /dev/null
- exit 0
+ notify "[ERROR] Arguments not according to new argument style\n"
+ exit 1
;;
esac
done
-if [[ $EUID -ne 0 ]]; then
- echo "This script must be run as root" 1>&2
+if [[ "$(sudo whoami)" != 'root' ]]; then
+ notify "[ERROR] This script requires sudo rights\n" 1>&2
exit 1
fi
-if [ -z $BASE_CONFIG_URI ] || [ -z $TARGET_LAB ] || \
- [ -z $TARGET_POD ] || [ -z $DEPLOY_SCENARIO ] || \
- [ -z $ISO ]; then
- echo "Arguments not according to new argument style"
- echo "Trying old-style compatibility mode"
- pushd ${DEPLOY_DIR} > /dev/null
- python deploy.py "$@"
- popd > /dev/null
- exit 0
+if ! virsh list >/dev/null 2>&1; then
+ notify "[ERROR] This script requires hypervisor access\n" 1>&2
+ exit 1
fi
+# Validate mandatory arguments are set
+if [ -z "${TARGET_LAB}" ] || [ -z "${TARGET_POD}" ] || \
+ [ -z "${DEPLOY_SCENARIO}" ]; then
+ notify "[ERROR] At least one of the mandatory args is missing!\n" 1>&2
+ usage
+ exit 1
+fi
+
+[[ "${CI_DEBUG}" =~ (false|0) ]] || set -x
+
# Enable the automatic exit trap
trap do_exit SIGINT SIGTERM EXIT
-# Set no restrictive umask so that Jenkins can removeeee any residuals
+# Set no restrictive umask so that Jenkins can remove any residuals
umask 0000
clean
-pushd ${DEPLOY_DIR} > /dev/null
+pushd "${DEPLOY_DIR}" > /dev/null
# Prepare the deploy config files based on lab/pod information, deployment
# scenario, etc.
-echo "python deploy-config.py -dha ${BASE_CONFIG_URI}/labs/${TARGET_LAB}/${TARGET_POD}/fuel/config/dha.yaml -deab file://${DEPLOY_DIR}/config/dea_base.yaml -deao ${BASE_CONFIG_URI}/labs/${TARGET_LAB}/${TARGET_POD}/fuel/config/dea-pod-override.yaml -scenario-base-uri file://${DEPLOY_DIR}/scenario -scenario ${DEPLOY_SCENARIO} -plugins file://${DEPLOY_DIR}/config/plugins -output ${SCRIPT_PATH}/config"
+# Install required packages
+[ -n "$(command -v apt-get)" ] && sudo apt-get install -y \
+ git make rsync mkisofs curl virtinst cpu-checker qemu-kvm
+[ -n "$(command -v yum)" ] && sudo yum install -y --skip-broken \
+ git make rsync genisoimage curl virt-install qemu-kvm
+
+if [ "$(uname -i)" = "aarch64" ]; then
+ [ -n "$(command -v apt-get)" ] && sudo apt-get install -y vgabios && \
+ sudo ln -sf /usr/share/vgabios/vgabios.bin /usr/share/qemu/vgabios-stdvga.bin
+ [ -n "$(command -v yum)" ] && sudo yum install -y --skip-broken vgabios
+fi
-python deploy-config.py -dha ${BASE_CONFIG_URI}/labs/${TARGET_LAB}/${TARGET_POD}/fuel/config/dha.yaml -deab file://${DEPLOY_DIR}/config/dea_base.yaml -deao ${BASE_CONFIG_URI}/labs/${TARGET_LAB}/${TARGET_POD}/fuel/config/dea-pod-override.yaml -scenario-base-uri file://${DEPLOY_DIR}/scenario -scenario ${DEPLOY_SCENARIO} -plugins file://${DEPLOY_DIR}/config/plugins -output ${SCRIPT_PATH}/config
+# Clone git submodules and apply our patches
+make -C "${REPO_ROOT_PATH}/mcp/patches" deepclean patches-import
-if [ $DRY_RUN -eq 0 ]; then
- # Download iso if it doesn't already exists locally
- if [[ $ISO == file://* ]]; then
- ISO=${ISO#file://}
+# Convert Pharos-compatible POD Descriptor File (PDF) to reclass model input
+PHAROS_GEN_CONFIG_SCRIPT="./pharos/config/utils/generate_config.py"
+PHAROS_INSTALLER_ADAPTER="./pharos/config/installers/fuel/pod_config.yml.j2"
+BASE_CONFIG_PDF="${BASE_CONFIG_URI}/labs/${TARGET_LAB}/${TARGET_POD}.yaml"
+BASE_CONFIG_IDF="${BASE_CONFIG_URI}/labs/${TARGET_LAB}/idf-${TARGET_POD}.yaml"
+LOCAL_PDF="${STORAGE_DIR}/$(basename "${BASE_CONFIG_PDF}")"
+LOCAL_IDF="${STORAGE_DIR}/$(basename "${BASE_CONFIG_IDF}")"
+LOCAL_PDF_RECLASS="${STORAGE_DIR}/pod_config.yml"
+if ! curl --create-dirs -o "${LOCAL_PDF}" "${BASE_CONFIG_PDF}"; then
+ if [ "${DEPLOY_TYPE}" = 'baremetal' ]; then
+ notify "[ERROR] Could not retrieve PDF (Pod Descriptor File)!\n" 1>&2
+ exit 1
else
- mkdir -p ${SCRIPT_PATH}/ISO
- curl -o ${SCRIPT_PATH}/ISO/image.iso $ISO
- ISO=${SCRIPT_PATH}/ISO/image.iso
+ notify "[WARN] Could not retrieve PDF (Pod Descriptor File)!\n" 3
+ fi
+elif ! curl -o "${LOCAL_IDF}" "${BASE_CONFIG_IDF}"; then
+ notify "[WARN] POD has no IDF (Installer Descriptor File)!\n" 3
+elif ! "${PHAROS_GEN_CONFIG_SCRIPT}" -y "${LOCAL_PDF}" \
+ -j "${PHAROS_INSTALLER_ADAPTER}" > "${LOCAL_PDF_RECLASS}"; then
+ notify "[ERROR] Could not convert PDF to reclass model input!\n" 1>&2
+ exit 1
+fi
+
+# Check scenario file existence
+SCENARIO_DIR="../config/scenario"
+if [ ! -f "${SCENARIO_DIR}/${DEPLOY_TYPE}/${DEPLOY_SCENARIO}.yaml" ]; then
+ notify "[WARN] ${DEPLOY_SCENARIO}.yaml not found!\n" 3
+ notify "[WARN] Setting simplest scenario (os-nosdn-nofeature-noha)\n" 3
+ DEPLOY_SCENARIO='os-nosdn-nofeature-noha'
+ if [ ! -f "${SCENARIO_DIR}/${DEPLOY_TYPE}/${DEPLOY_SCENARIO}.yaml" ]; then
+ notify "[ERROR] Scenario definition file is missing!\n" 1>&2
+ exit 1
+ fi
+fi
+
+# Check defaults file existence
+if [ ! -f "${SCENARIO_DIR}/defaults-$(uname -i).yaml" ]; then
+ notify "[ERROR] Scenario defaults file is missing!\n" 1>&2
+ exit 1
+fi
+
+# Get required infra deployment data
+set +x
+source lib.sh
+eval "$(parse_yaml "${SCENARIO_DIR}/defaults-$(uname -i).yaml")"
+eval "$(parse_yaml "${SCENARIO_DIR}/${DEPLOY_TYPE}/${DEPLOY_SCENARIO}.yaml")"
+eval "$(parse_yaml "${LOCAL_PDF_RECLASS}")"
+[[ "${CI_DEBUG}" =~ (false|0) ]] || set -x
+
+export CLUSTER_DOMAIN=${cluster_domain}
+
+declare -A virtual_nodes_ram virtual_nodes_vcpus
+for node in "${virtual_nodes[@]}"; do
+ virtual_custom_ram="virtual_${node}_ram"
+ virtual_custom_vcpus="virtual_${node}_vcpus"
+ virtual_nodes_ram[$node]=${!virtual_custom_ram:-$virtual_default_ram}
+ virtual_nodes_vcpus[$node]=${!virtual_custom_vcpus:-$virtual_default_vcpus}
+done
+
+# Expand reclass and virsh network templates
+for tp in "${RECLASS_CLUSTER_DIR}/all-mcp-ocata-common/opnfv/"*.template \
+ net_*.template; do
+ eval "cat <<-EOF
+ $(<"${tp}")
+ EOF" 2> /dev/null > "${tp%.template}"
+done
+
+# Map PDF networks 'admin', 'mgmt', 'private' and 'public' to bridge names
+BR_NAMES=('admin' 'mgmt' 'private' 'public')
+BR_NETS=( \
+ "${parameters__param_opnfv_maas_pxe_address}" \
+ "${parameters__param_opnfv_infra_config_address}" \
+ "${parameters__param_opnfv_openstack_compute_node01_tenant_address}" \
+ "${parameters__param_opnfv_openstack_compute_node01_external_address}" \
+)
+for ((i = 0; i < ${#BR_NETS[@]}; i++)); do
+ br_jump=$(eval echo "\$parameters__param_opnfv_jump_bridge_${BR_NAMES[i]}")
+ if [ -n "${br_jump}" ] && [ "${br_jump}" != 'None' ] && \
+ [ -d "/sys/class/net/${br_jump}/bridge" ]; then
+ notify "[OK] Bridge found for '${BR_NAMES[i]}': ${br_jump}\n" 2
+ OPNFV_BRIDGES[${i}]="${br_jump}"
+ elif [ -n "${BR_NETS[i]}" ]; then
+ bridge=$(ip addr | awk "/${BR_NETS[i]%.*}./ {print \$NF; exit}")
+ if [ -n "${bridge}" ] && [ -d "/sys/class/net/${bridge}/bridge" ]; then
+ notify "[OK] Bridge found for net ${BR_NETS[i]%.*}.0: ${bridge}\n" 2
+ OPNFV_BRIDGES[${i}]="${bridge}"
+ fi
fi
- # Start deployment
- echo "python deploy.py $DEPLOY_LOG $STORAGE_DIR $PXE_BRIDGE $USE_EXISTING_FUEL $FUEL_CREATION_ONLY $NO_HEALTH_CHECK $NO_DEPLOY_ENVIRONMENT -dea ${SCRIPT_PATH}/config/dea.yaml -dha ${SCRIPT_PATH}/config/dha.yaml -iso $ISO $DEPLOY_TIMEOUT"
- python deploy.py $DEPLOY_LOG $STORAGE_DIR $PXE_BRIDGE $USE_EXISTING_FUEL $FUEL_CREATION_ONLY $NO_HEALTH_CHECK $NO_DEPLOY_ENVIRONMENT -dea ${SCRIPT_PATH}/config/dea.yaml -dha ${SCRIPT_PATH}/config/dha.yaml -iso $ISO $DEPLOY_TIMEOUT
+done
+notify "[NOTE] Using bridges: ${OPNFV_BRIDGES[*]}\n" 2
+
+# Infra setup
+if [ ${DRY_RUN} -eq 1 ]; then
+ notify "[NOTE] Dry run, skipping all deployment tasks\n" 2 1>&2
+ exit 0
+elif [ ${USE_EXISTING_INFRA} -gt 0 ]; then
+ notify "[NOTE] Use existing infra\n" 2 1>&2
+ check_connection
+else
+ generate_ssh_key
+ prepare_vms virtual_nodes "${base_image}" "${STORAGE_DIR}"
+ create_networks OPNFV_BRIDGES
+ create_vms virtual_nodes virtual_nodes_ram virtual_nodes_vcpus \
+ OPNFV_BRIDGES "${STORAGE_DIR}"
+ update_mcpcontrol_network
+ start_vms virtual_nodes
+ check_connection
+fi
+if [ ${USE_EXISTING_INFRA} -lt 2 ]; then
+ wait_for 5 "./salt.sh ${LOCAL_PDF_RECLASS}"
fi
+
+# Openstack cluster setup
+set +x
+if [ ${INFRA_CREATION_ONLY} -eq 1 ] || [ ${NO_DEPLOY_ENVIRONMENT} -eq 1 ]; then
+ notify "[NOTE] Skip openstack cluster setup\n" 2
+else
+ for state in "${cluster_states[@]}"; do
+ notify "[STATE] Applying state: ${state}\n" 2
+ # shellcheck disable=SC2086,2029
+ wait_for 5 "ssh ${SSH_OPTS} ${SSH_SALT} \
+ sudo /root/fuel/mcp/config/states/${state}"
+ done
+fi
+
+./log.sh "${DEPLOY_LOG}"
+
popd > /dev/null
#
# END of main
-############################################################################
+##############################################################################
Code Review / fuel.git / blobdiff