# author: Tim Rozet (trozet@redhat.com)
#
# Based on RDO Manager http://www.rdoproject.org
-#
-# Pre-requisties:
-# - Supports 3 or 4 network interface configuration
-# - Target system must be RPM based
-# - Provisioned nodes expected to have following order of network connections (note: not all have to exist, but order is maintained):
-# eth0- admin network
-# eth1- private network (+storage network in 3 NIC config)
-# eth2- public network
-# eth3- storage network
-# - script assumes /24 subnet mask
set -e
##VARIABLES
-#reset=`tput sgr0`
-#blue=`tput setaf 4`
-#red=`tput setaf 1`
-#green=`tput setaf 2`
+if [ "$TERM" != "unknown" ]; then
+ reset=$(tput sgr0)
+ blue=$(tput setaf 4)
+ red=$(tput setaf 1)
+ green=$(tput setaf 2)
+else
+ reset=""
+ blue=""
+ red=""
+ green=""
+fi
vm_index=4
+ha_enabled="TRUE"
+ping_site="8.8.8.8"
+ntp_server="pool.ntp.org"
+net_isolation_enabled="TRUE"
+
declare -i CNT
declare UNDERCLOUD
+declare -A deploy_options_array
SSH_OPTIONS=(-o StrictHostKeyChecking=no -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null -o LogLevel=error)
DEPLOY_OPTIONS=""
RESOURCES=/var/opt/opnfv/stack
CONFIG=/var/opt/opnfv
+INSTACKENV=$CONFIG/instackenv.json
+NETENV=$CONFIG/network-environment.yaml
##FUNCTIONS
+##translates yaml into variables
+##params: filename, prefix (ex. "config_")
+##usage: parse_yaml opnfv_ksgen_settings.yml "config_"
+parse_yaml() {
+ local prefix=$2
+ local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
+ sed -ne "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
+ -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $1 |
+ awk -F$fs '{
+ indent = length($1)/2;
+ vname[indent] = $2;
+ for (i in vname) {if (i > indent) {delete vname[i]}}
+ if (length($3) > 0) {
+ vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
+ printf("%s%s%s=%s\n", "'$prefix'",vn, $2, $3);
+ }
+ }'
+}
+
+##checks if prefix exists in string
+##params: string, prefix
+##usage: contains_prefix "deploy_setting_launcher=1" "deploy_setting"
+contains_prefix() {
+ local mystr=$1
+ local prefix=$2
+ if echo $mystr | grep -E "^$prefix.*$" > /dev/null; then
+ return 0
+ else
+ return 1
+ fi
+}
+##parses variable from a string with '='
+##and removes global prefix
+##params: string, prefix
+##usage: parse_setting_var 'deploy_myvar=2' 'deploy_'
+parse_setting_var() {
+ local mystr=$1
+ local prefix=$2
+ if echo $mystr | grep -E "^.+\=" > /dev/null; then
+ echo $(echo $mystr | grep -Eo "^.+\=" | tr -d '=' | sed 's/^'"$prefix"'//')
+ else
+ return 1
+ fi
+}
+##parses value from a string with '='
+##params: string
+##usage: parse_setting_value
+parse_setting_value() {
+ local mystr=$1
+ echo $(echo $mystr | grep -Eo "\=.*$" | tr -d '=')
+}
+##parses deploy settings yaml into globals and options array
+##params: none
+##usage: parse_deploy_settings
+parse_deploy_settings() {
+ local global_prefix="deploy_global_params_"
+ local options_prefix="deploy_deploy_options_"
+ local myvar myvalue
+ local settings=$(parse_yaml $DEPLOY_SETTINGS_FILE "deploy_")
+
+ for this_setting in $settings; do
+ if contains_prefix $this_setting $global_prefix; then
+ myvar=$(parse_setting_var $this_setting $global_prefix)
+ if [ -z "$myvar" ]; then
+ echo -e "${red}ERROR: while parsing ${DEPLOY_SETTINGS_FILE} for setting: ${this_setting}${reset}"
+ fi
+ myvalue=$(parse_setting_value $this_setting)
+ # Do not override variables set by cmdline
+ if [ -z "$(eval echo \$$myvar)" ]; then
+ eval "$myvar=\$myvalue"
+ echo -e "${blue}Global parameter set: ${myvar}:${myvalue}${reset}"
+ else
+ echo -e "${blue}Global parameter already set: ${myvar}${reset}"
+ fi
+ elif contains_prefix $this_setting $options_prefix; then
+ myvar=$(parse_setting_var $this_setting $options_prefix)
+ if [ -z "$myvar" ]; then
+ echo -e "${red}ERROR: while parsing ${DEPLOY_SETTINGS_FILE} for setting: ${this_setting}${reset}"
+ fi
+ myvalue=$(parse_setting_value $this_setting)
+ deploy_options_array[$myvar]=$myvalue
+ echo -e "${blue}Deploy option set: ${myvar}:${myvalue}${reset}"
+ fi
+ done
+}
+##parses baremetal yaml settings into compatible json
+##writes the json to $CONFIG/instackenv_tmp.json
+##params: none
+##usage: parse_inventory_file
+parse_inventory_file() {
+ local inventory=$(parse_yaml $INVENTORY_FILE)
+ local node_list
+ local node_prefix="node"
+ local node_count=0
+ local node_total
+ local inventory_list
+
+ # detect number of nodes
+ for entry in $inventory; do
+ if echo $entry | grep -Eo "^nodes_node[0-9]+_" > /dev/null; then
+ this_node=$(echo $entry | grep -Eo "^nodes_node[0-9]+_")
+ if [[ $inventory_list != *"$this_node"* ]]; then
+ inventory_list+="$this_node "
+ fi
+ fi
+ done
+
+ inventory_list=$(echo $inventory_list | sed 's/ $//')
+
+ for node in $inventory_list; do
+ ((node_count+=1))
+ done
+
+ node_total=$node_count
+
+ if [[ "$node_total" -lt 5 && ha_enabled == "TRUE" ]]; then
+ echo -e "${red}ERROR: You must provide at least 5 nodes for HA baremetal deployment${reset}"
+ exit 1
+ elif [[ "$node_total" -lt 2 ]]; then
+ echo -e "${red}ERROR: You must provide at least 2 nodes for non-HA baremetal deployment${reset}"
+ exit 1
+ fi
+
+ eval $(parse_yaml $INVENTORY_FILE)
+
+ instack_env_output="
+{
+ \"nodes\" : [
+
+"
+ node_count=0
+ for node in $inventory_list; do
+ ((node_count+=1))
+ node_output="
+ {
+ \"pm_password\": \"$(eval echo \${${node}ipmi_pass})\",
+ \"pm_type\": \"pxe_ipmitool\",
+ \"mac\": [
+ \"$(eval echo \${${node}mac_address})\"
+ ],
+ \"cpu\": \"$(eval echo \${${node}cpus})\",
+ \"memory\": \"$(eval echo \${${node}memory})\",
+ \"disk\": \"$(eval echo \${${node}disk})\",
+ \"arch\": \"$(eval echo \${${node}arch})\",
+ \"pm_user\": \"$(eval echo \${${node}ipmi_user})\",
+ \"pm_addr\": \"$(eval echo \${${node}ipmi_ip})\"
+"
+ instack_env_output+=${node_output}
+ if [ $node_count -lt $node_total ]; then
+ instack_env_output+=" },"
+ else
+ instack_env_output+=" }"
+ fi
+ done
+
+ instack_env_output+='
+ ]
+}
+'
+ #Copy instackenv.json to undercloud for baremetal
+ echo -e "{blue}Parsed instackenv JSON:\n${instack_env_output}${reset}"
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
+cat > instackenv.json << EOF
+$instack_env_output
+EOF
+EOI
+
+}
##verify internet connectivity
#params: none
function verify_internet {
- if ping -c 2 8.8.8.8 > /dev/null; then
+ if ping -c 2 $ping_site > /dev/null; then
if ping -c 2 www.google.com > /dev/null; then
echo "${blue}Internet connectivity detected${reset}"
return 0
if ! verify_internet; then
echo "${red}Will not download dependencies${reset}"
internet=false
- else
- internet=true
fi
- # ensure brbm network is configured
+ # verify ip forwarding
+ if sysctl net.ipv4.ip_forward | grep 0; then
+ sudo sysctl -w net.ipv4.ip_forward=1
+ sudo sh -c "echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf"
+ fi
+
+ # ensure brbm networks are configured
systemctl start openvswitch
ovs-vsctl list-br | grep brbm > /dev/null || ovs-vsctl add-br brbm
virsh net-list --all | grep brbm > /dev/null || virsh net-create $CONFIG/brbm-net.xml
virsh net-list | grep -E "brbm\s+active" > /dev/null || virsh net-start brbm
+ ovs-vsctl list-br | grep brbm1 > /dev/null || ovs-vsctl add-br brbm1
+ virsh net-list --all | grep brbm1 > /dev/null || virsh net-create $CONFIG/brbm1-net.xml
+ virsh net-list | grep -E "brbm1\s+active" > /dev/null || virsh net-start brbm1
# ensure storage pool exists and is started
virsh pool-list --all | grep default > /dev/null || virsh pool-create $CONFIG/default-pool.xml
Are you sure you have enabled vmx in your bios or hypervisor?${reset}"
fi
- modprobe kvm
- modprobe kvm_intel
+ if ! lsmod | grep kvm > /dev/null; then modprobe kvm; fi
+ if ! lsmod | grep kvm_intel > /dev/null; then modprobe kvm_intel; fi
if ! lsmod | grep kvm > /dev/null; then
echo "${red}kvm kernel modules not loaded!${reset}"
}
##verify vm exists, an has a dhcp lease assigned to it
-##params: none
+##params: none
function setup_instack_vm {
if ! virsh list --all | grep instack > /dev/null; then
#virsh vol-create default instack.qcow2.xml
#Upload instack image
#virsh vol-create default --file instack.qcow2.xml
virsh vol-create-as default instack.qcow2 30G --format qcow2
- virsh vol-upload --pool default --vol instack.qcow2 --file $CONFIG/stack/instack.qcow2
- sleep 1 # this was to let the copy settle, needed with vol-upload?
+ ### this doesn't work for some reason I was getting hangup events so using cp instead
+ #virsh vol-upload --pool default --vol instack.qcow2 --file $CONFIG/stack/instack.qcow2
+ #2015-12-05 12:57:20.569+0000: 8755: info : libvirt version: 1.2.8, package: 16.el7_1.5 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-03-13:56:46, worker1.bsys.centos.org)
+ #2015-12-05 12:57:20.569+0000: 8755: warning : virKeepAliveTimerInternal:143 : No response from client 0x7ff1e231e630 after 6 keepalive messages in 35 seconds
+ #2015-12-05 12:57:20.569+0000: 8756: warning : virKeepAliveTimerInternal:143 : No response from client 0x7ff1e231e630 after 6 keepalive messages in 35 seconds
+ #error: cannot close volume instack.qcow2
+ #error: internal error: received hangup / error event on socket
+ #error: Reconnected to the hypervisor
+
+ cp -f $RESOURCES/instack.qcow2 /var/lib/libvirt/images/instack.qcow2
else
echo "Found Instack VM, using existing VM"
# if the VM is not running update the authkeys and start it
if ! virsh list | grep instack > /dev/null; then
echo "Injecting ssh key to instack VM"
- virt-customize -c qemu:///system -d instack --upload ~/.ssh/id_rsa.pub:/root/.ssh/authorized_keys \
+ virt-customize -c qemu:///system -d instack --run-command "mkdir /root/.ssh/" \
+ --upload ~/.ssh/id_rsa.pub:/root/.ssh/authorized_keys \
--run-command "chmod 600 /root/.ssh/authorized_keys && restorecon /root/.ssh/authorized_keys" \
--run-command "cp /root/.ssh/authorized_keys /home/stack/.ssh/" \
--run-command "chown stack:stack /home/stack/.ssh/authorized_keys && chmod 600 /home/stack/.ssh/authorized_keys"
# get the instack VM IP
UNDERCLOUD=$(grep instack /var/lib/libvirt/dnsmasq/default.leases | awk '{print $3}' | head -n 1)
+ if [ -z "$UNDERCLOUD" ]; then
+ #if not found then dnsmasq may be using leasefile-ro
+ instack_mac=$(virsh domiflist instack | grep default | \
+ grep -Eo "[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+")
+ UNDERCLOUD=$(arp -e | grep ${instack_mac} | awk {'print $1'})
+
+ if [ -z "$UNDERCLOUD" ]; then
+ echo "\n\nNever got IP for Instack. Can Not Continue."
+ exit 1
+ fi
+ else
+ echo -e "${blue}\rInstack VM has IP $UNDERCLOUD${reset}"
+ fi
CNT=10
echo -en "${blue}\rValidating instack VM connectivity${reset}"
while ! ping -c 1 $UNDERCLOUD > /dev/null && [ $CNT -gt 0 ]; do
echo -n "."
sleep 3
- CNT=CNT-1
+ CNT=$CNT-1
done
+ if [ "$CNT" -eq 0 ]; then
+ echo "Failed to contact Instack. Can Not Continue"
+ exit 1
+ fi
CNT=10
while ! ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "echo ''" 2>&1> /dev/null && [ $CNT -gt 0 ]; do
echo -n "."
sleep 3
- CNT=CNT-1
+ CNT=$CNT-1
done
+ if [ "$CNT" -eq 0 ]; then
+ echo "Failed to connect to Instack. Can Not Continue"
+ exit 1
+ fi
# extra space to overwrite the previous connectivity output
- echo -e "${blue}\rInstack VM has IP $UNDERCLOUD ${reset}"
+ echo -e "${blue}\r ${reset}"
+
+ #add the instack brbm1 interface
+ virsh attach-interface --domain instack --type network --source brbm1 --model rtl8139 --config --live
+ sleep 1
+ ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "if ! ip a s eth2 | grep 192.168.37.1 > /dev/null; then ip a a 192.168.37.1/24 dev eth2; ip link set up dev eth2; fi"
- ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "if ! ip a s eth1 | grep 192.0.2.1 > /dev/null; then ip a a 192.0.2.1/24 dev eth1; fi"
# ssh key fix for stack user
ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "restorecon -r /home/stack"
}
##params: none
function setup_virtual_baremetal {
for i in $(seq 0 $vm_index); do
- if ! virsh list --all | grep baremetalbrbm_${i} > /dev/null; then
- if [ ! -e $CONFIG/baremetalbrbm_${i}.xml ]; then
- define_virtual_node baremetalbrbm_${i}
+ if ! virsh list --all | grep baremetalbrbm_brbm1_${i} > /dev/null; then
+ if [ ! -e $CONFIG/baremetalbrbm_brbm1_${i}.xml ]; then
+ define_virtual_node baremetalbrbm_brbm1_${i}
fi
- virsh define $CONFIG/baremetalbrbm_${i}.xml
+ virsh define $CONFIG/baremetalbrbm_brbm1_${i}.xml
else
echo "Found Baremetal ${i} VM, using existing VM"
fi
- virsh vol-list default | grep baremetalbrbm_${i} 2>&1> /dev/null || virsh vol-create-as default baremetalbrbm_${i}.qcow2 40G --format qcow2
+ virsh vol-list default | grep baremetalbrbm_brbm1_${i} 2>&1> /dev/null || virsh vol-create-as default baremetalbrbm_brbm1_${i}.qcow2 40G --format qcow2
done
+
}
##Copy over the glance images and instack json file
##params: none
-function copy_materials {
+function configure_undercloud {
echo
echo "Copying configuration file and disk images to instack"
- scp ${SSH_OPTIONS[@]} $RESOURCES/deploy-ramdisk-ironic.initramfs "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $RESOURCES/deploy-ramdisk-ironic.kernel "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $RESOURCES/ironic-python-agent.initramfs "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $RESOURCES/ironic-python-agent.kernel "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $RESOURCES/ironic-python-agent.vmlinuz "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $RESOURCES/overcloud-full.initrd "stack@$UNDERCLOUD":
scp ${SSH_OPTIONS[@]} $RESOURCES/overcloud-full.qcow2 "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $RESOURCES/overcloud-full.vmlinuz "stack@$UNDERCLOUD":
+ scp ${SSH_OPTIONS[@]} $NETENV "stack@$UNDERCLOUD":
+ scp ${SSH_OPTIONS[@]} -r $CONFIG/nics/ "stack@$UNDERCLOUD":
# ensure stack user on instack machine has an ssh key
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "if [ ! -e ~/.ssh/id_rsa.pub ]; then ssh-keygen -t rsa -N '' -f ~/.ssh/id_rsa; fi"
- if [ $virtual == "TRUE" ]; then
+ if [ "$virtual" == "TRUE" ]; then
+
+ # copy the instack vm's stack user's pub key to
+ # root's auth keys so that instack can control
+ # vm power on the hypervisor
+ ssh ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "cat /home/stack/.ssh/id_rsa.pub" >> /root/.ssh/authorized_keys
+
# fix MACs to match new setup
for i in $(seq 0 $vm_index); do
pyscript="import json
print data['nodes'][$i]['mac'][0]"
old_mac=$(python -c "$pyscript")
- new_mac=$(virsh dumpxml baremetalbrbm_$i | grep "mac address" | cut -d = -f2 | grep -Eo "[0-9a-f:]+")
- if [ "$old_mac" != "$new_mac" ]; then
- echo "${blue}Modifying MAC for node from $old_mac to ${new_mac}${reset}"
- sed -i 's/'"$old_mac"'/'"$new_mac"'/' $CONFIG/instackenv-virt.json
- fi
+ new_mac=$(virsh dumpxml baremetalbrbm_brbm1_$i | grep "mac address" | cut -d = -f2 | grep -Eo "[0-9a-f:]+")
+ # this doesn't work with multiple vnics on the vms
+ #if [ "$old_mac" != "$new_mac" ]; then
+ # echo "${blue}Modifying MAC for node from $old_mac to ${new_mac}${reset}"
+ # sed -i 's/'"$old_mac"'/'"$new_mac"'/' $CONFIG/instackenv-virt.json
+ #fi
done
- # upload virt json file
- scp ${SSH_OPTIONS[@]} $CONFIG/instackenv-virt.json "stack@$UNDERCLOUD":instackenv.json
+ DEPLOY_OPTIONS+=" --libvirt-type qemu"
+ INSTACKENV=$CONFIG/instackenv-virt.json
+ NETENV=$CONFIG/network-environment.yaml
- # allow stack to control power management on the hypervisor via sshkey
+ # upload instackenv file to Instack for virtual deployment
+ scp ${SSH_OPTIONS[@]} $INSTACKENV "stack@$UNDERCLOUD":instackenv.json
+ fi
+
+ # allow stack to control power management on the hypervisor via sshkey
+ # only if this is a virtual deployment
+ if [ "$virtual" == "TRUE" ]; then
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
while read -r line; do
stack_key=\${stack_key}\\\\\\\\n\${line}
stack_key=\$(echo \$stack_key | sed 's/\\\\\\\\n//')
sed -i 's~INSERT_STACK_USER_PRIV_KEY~'"\$stack_key"'~' instackenv.json
EOI
- DEPLOY_OPTIONS+="--libvirt-type qemu"
- else
- scp ${SSH_OPTIONS[@]} $CONFIG/instackenv.json "stack@$UNDERCLOUD":
fi
+ # copy stack's ssh key to this users authorized keys
+ ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "cat /home/stack/.ssh/id_rsa.pub" >> ~/.ssh/authorized_keys
+
+ # configure undercloud on Undercloud VM
+ echo "Running undercloud configuration."
+ echo "Logging undercloud configuration to instack:/home/stack/apex-undercloud-install.log"
+ ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" << EOI
+if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
+ sed -i 's/#local_ip/local_ip/' undercloud.conf
+ sed -i 's/#network_gateway/network_gateway/' undercloud.conf
+ sed -i 's/#network_cidr/network_cidr/' undercloud.conf
+ sed -i 's/#dhcp_start/dhcp_start/' undercloud.conf
+ sed -i 's/#dhcp_end/dhcp_end/' undercloud.conf
+ sed -i 's/#inspection_iprange/inspection_iprange/' undercloud.conf
+ sed -i 's/#undercloud_debug/undercloud_debug/' undercloud.conf
+
+ openstack-config --set undercloud.conf DEFAULT local_ip ${deploy_options_array['instack_ip']}/${deploy_options_array['provisioning_cidr']##*/}
+ openstack-config --set undercloud.conf DEFAULT network_gateway ${deploy_options_array['provisioning_gateway']}
+ openstack-config --set undercloud.conf DEFAULT network_cidr ${deploy_options_array['provisioning_cidr']}
+ openstack-config --set undercloud.conf DEFAULT dhcp_start ${deploy_options_array['provisioning_dhcp_start']}
+ openstack-config --set undercloud.conf DEFAULT dhcp_end ${deploy_options_array['provisioning_dhcp_end']}
+ openstack-config --set undercloud.conf DEFAULT inspection_iprange ${deploy_options_array['provisioning_inspection_iprange']}
+ openstack-config --set undercloud.conf DEFAULT undercloud_debug false
+
+ if [ -n "$net_isolation_enabled" ]; then
+ sed -i '/ControlPlaneSubnetCidr/c\\ ControlPlaneSubnetCidr: "${deploy_options_array['provisioning_cidr']##*/}"' network-environment.yaml
+ sed -i '/ControlPlaneDefaultRoute/c\\ ControlPlaneDefaultRoute: ${deploy_options_array['provisioning_gateway']}' network-environment.yaml
+ sed -i '/ExternalNetCidr/c\\ ExternalNetCidr: ${deploy_options_array['ext_net_cidr']}' network-environment.yaml
+ sed -i '/ExternalAllocationPools/c\\ ExternalAllocationPools: [{'start': '${deploy_options_array['ext_allocation_pool_start']}', 'end': '${deploy_options_array['ext_allocation_pool_end']}'}]' network-environment.yaml
+ sed -i '/ExternalInterfaceDefaultRoute/c\\ ExternalInterfaceDefaultRoute: ${deploy_options_array['ext_gateway']}' network-environment.yaml
+ fi
+fi
-# copy stack's ssh key to this users authorized keys
-ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "cat /home/stack/.ssh/id_rsa.pub" >> ~/.ssh/authorized_keys
+openstack undercloud install &> apex-undercloud-install.log
+EOI
}
##preping it for deployment and launch the deploy
##params: none
function undercloud_prep_overcloud_deploy {
+
+ if [[ ${#deploy_options_array[@]} -eq 0 || ${deploy_options_array['sdn_controller']} == 'opendaylight' ]]; then
+ DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight.yaml"
+ elif [ ${deploy_options_array['sdn_controller']} == 'opendaylight-external' ]; then
+ DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight-external.yaml"
+ elif [ ${deploy_options_array['sdn_controller']} == 'onos' ]; then
+ echo -e "${red}ERROR: ONOS is currently unsupported...exiting${reset}"
+ exit 1
+ elif [ ${deploy_options_array['sdn_controller']} == 'opencontrail' ]; then
+ echo -e "${red}ERROR: OpenContrail is currently unsupported...exiting${reset}"
+ exit 1
+ fi
+
# check if HA is enabled
- if [ "$vm_index" -gt 1 ]; then
+ if [[ "$ha_enabled" == "TRUE" ]]; then
DEPLOY_OPTIONS+=" --control-scale 3 --compute-scale 2"
DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/puppet-pacemaker.yaml"
- DEPLOY_OPTIONS+=" --ntp-server pool.ntp.org"
+ fi
+
+ if [[ "$net_isolation_enabled" == "TRUE" ]]; then
+ DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/network-isolation.yaml"
+ DEPLOY_OPTIONS+=" -e network-environment.yaml"
+ fi
+
+ if [[ "$ha_enabled" == "TRUE" ]] || [[ $net_isolation_enabled == "TRUE" ]]; then
+ DEPLOY_OPTIONS+=" --ntp-server $ntp_server"
fi
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
}
display_usage() {
- echo -e "\n\n${blue}This script is used to deploy the Apex Installer and Provision OPNFV Target System${reset}\n\n"
- echo -e "\nUsage:\n$0 [arguments] \n"
- echo -e "\n -c|--config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: --config /opt/myinventory.yml \n"
- echo -e "\n -r|--resources : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: --config /opt/myinventory.yml \n"
- echo -e "\n -v|--virtual : Virtualize compute nodes instead of using baremetal. \n"
- echo -e "\n -p|--ping-site : site to use to verify IP connectivity from the VM when -virtual is used. Format: -ping_site www.blah.com \n"
- echo -e "\n -n|--no-ha : disable High Availablility deploymnet scheme, this assumes a single controller and single compute node \n"
+ echo -e "Usage:\n$0 [arguments] \n"
+ echo -e " -c|--config : Directory to configuration files. Optional. Defaults to /var/opt/opnfv/ \n"
+ echo -e " -d|--deploy-settings : Full path to deploy settings yaml file. Optional. Defaults to null \n"
+ echo -e " -i|--inventory : Full path to inventory yaml file. Required only for baremetal \n"
+ echo -e " -n|--netenv : Full path to network environment file. Optional. Defaults to \$CONFIG/network-environment.yaml \n"
+ echo -e " -p|--ping-site : site to use to verify IP connectivity. Optional. Defaults to 8.8.8.8 \n"
+ echo -e " -r|--resources : Directory to deployment resources. Optional. Defaults to /var/opt/opnfv/stack \n"
+ echo -e " -v|--virtual : Virtualize overcloud nodes instead of using baremetal. \n"
+ echo -e " --no-ha : disable High Availability deployment scheme, this assumes a single controller and single compute node \n"
+ echo -e " --flat : disable Network Isolation and use a single flat network for the underlay network."
}
-##translates the command line paramaters into variables
+##translates the command line parameters into variables
##params: $@ the entire command line is passed
##usage: parse_cmd_line() "$@"
parse_cmdline() {
while [ "${1:0:1}" = "-" ]
do
- echo $1
case "$1" in
-h|--help)
display_usage
;;
-c|--config)
CONFIG=$2
+ echo "Deployment Configuration Directory Overridden to: $2"
+ shift 2
+ ;;
+ -d|--deploy-settings)
+ DEPLOY_SETTINGS_FILE=$2
+ echo "Deployment Configuration file: $2"
+ shift 2
+ ;;
+ -i|--inventory)
+ INVENTORY_FILE=$2
+ shift 2
+ ;;
+ -n|--netenv)
+ NETENV=$2
+ shift 2
+ ;;
+ -p|--ping-site)
+ ping_site=$2
+ echo "Using $2 as the ping site"
shift 2
;;
-r|--resources)
RESOURCES=$2
+ echo "Deployment Resources Directory Overridden to: $2"
shift 2
;;
-v|--virtual)
virtual="TRUE"
+ echo "Executing a Virtual Deployment"
shift 1
;;
- -p|--ping-site)
- ping_site=$2
- shift 2
+ --no-ha )
+ ha_enabled="FALSE"
+ echo "HA Deployment Disabled"
+ shift 1
;;
- -n|--no-ha )
- vm_index=1
+ --flat )
+ net_isolation_enabled="FALSE"
+ echo "Underlay Network Isolation Disabled: using flat configuration"
shift 1
- ;;
+ ;;
*)
display_usage
exit 1
;;
esac
done
+
+ if [[ ! -z "$NETENV" && "$net_isolation_enabled" == "FALSE" ]]; then
+ echo -e "${red}INFO: Single flat network requested. Ignoring any netenv settings!${reset}"
+ elif [[ ! -z "$NETENV" && ! -z "$DEPLOY_SETTINGS_FILE" ]]; then
+ echo -e "${red}WARN: deploy_settings and netenv specified. Ignoring netenv settings! deploy_settings will contain \
+netenv${reset}"
+ fi
+
+ if [[ -n "$virtual" && -n "$INVENTORY_FILE" ]]; then
+ echo -e "${red}ERROR: You should not specify an inventory with virtual deployments${reset}"
+ exit 1
+ fi
+
+ if [[ ! -z "$DEPLOY_SETTINGS_FILE" && ! -f "$DEPLOY_SETTINGS_FILE" ]]; then
+ echo -e "${red}ERROR: ${DEPLOY_SETTINGS_FILE} does not exist! Exiting...${reset}"
+ exit 1
+ fi
+
+ if [[ ! -z "$NETENV" && ! -f "$NETENV" ]]; then
+ echo -e "${red}ERROR: ${NETENV} does not exist! Exiting...${reset}"
+ exit 1
+ fi
+
+ if [[ ! -z "$INVENTORY_FILE" && ! -f "$INVENTORY_FILE" ]]; then
+ echo -e "{$red}ERROR: ${DEPLOY_SETTINGS_FILE} does not exist! Exiting...${reset}"
+ exit 1
+ fi
+
+ if [[ -z "$virtual" && -z "$INVENTORY_FILE" ]]; then
+ echo -e "${red}ERROR: You must specify an inventory file for baremetal deployments! Exiting...${reset}"
+ exit 1
+ fi
}
##END FUNCTIONS
main() {
parse_cmdline "$@"
- configure_deps
+ if ! configure_deps; then
+ echo "Dependency Validation Failed, Exiting."
+ fi
+ if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
+ parse_deploy_settings
+ fi
setup_instack_vm
- if [ $virtual == "TRUE" ]; then
+ if [ "$virtual" == "TRUE" ]; then
setup_virtual_baremetal
+ elif [ -n "$INVENTORY_FILE" ]; then
+ parse_inventory_file
fi
- copy_materials
+ configure_undercloud
undercloud_prep_overcloud_deploy
}