ping_site="8.8.8.8"
ntp_server="pool.ntp.org"
net_isolation_enabled="TRUE"
+net_isolation_arg=""
post_config="TRUE"
debug="FALSE"
$LIB/parse-functions.sh
$LIB/virtual-setup-functions.sh
$LIB/undercloud-functions.sh
+$LIB/overcloud-deploy-functions.sh
+$LIB/post-install-functions.sh
$LIB/utility-functions.sh
$LIB/installer/onos/onos_gw_mac_update.sh
)
fi
done
-##FUNCTIONS
-##checks if prefix exists in string
-##params: string, prefix
-##usage: contains_prefix "deploy_setting_launcher=1" "deploy_setting"
-contains_prefix() {
- local mystr=$1
- local prefix=$2
- if echo $mystr | grep -E "^$prefix.*$" > /dev/null; then
- return 0
- else
- return 1
- fi
-}
-
-##verify internet connectivity
-#params: none
-function verify_internet {
- if ping -c 2 $ping_site > /dev/null; then
- if ping -c 2 www.google.com > /dev/null; then
- echo "${blue}Internet connectivity detected${reset}"
- return 0
- else
- echo "${red}Internet connectivity detected, but DNS lookup failed${reset}"
- return 1
- fi
- else
- echo "${red}No internet connectivity detected${reset}"
- return 1
- fi
-}
-
-##preping it for deployment and launch the deploy
-##params: none
-function undercloud_prep_overcloud_deploy {
- if [[ "${#deploy_options_array[@]}" -eq 0 || "${deploy_options_array['sdn_controller']}" == 'opendaylight' ]]; then
- if [ "${deploy_options_array['sdn_l3']}" == 'True' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_l3.yaml"
- elif [ "${deploy_options_array['sfc']}" == 'True' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_sfc.yaml"
- elif [ "${deploy_options_array['vpn']}" == 'True' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_sdnvpn.yaml"
- elif [ "${deploy_options_array['vpp']}" == 'True' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight_fdio.yaml"
- else
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight.yaml"
- fi
- SDN_IMAGE=opendaylight
- if [ "${deploy_options_array['sfc']}" == 'True' ]; then
- SDN_IMAGE+=-sfc
- if [ ! -f $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 ]; then
- echo "${red} $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 is required to execute an SFC deployment."
- echo "Please install the opnfv-apex-opendaylight-sfc package to provide this overcloud image for deployment.${reset}"
- exit 1
- fi
- fi
- elif [ "${deploy_options_array['sdn_controller']}" == 'opendaylight-external' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/opendaylight-external.yaml"
- SDN_IMAGE=opendaylight
- elif [ "${deploy_options_array['sdn_controller']}" == 'onos' ]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/onos.yaml"
- SDN_IMAGE=onos
- elif [ "${deploy_options_array['sdn_controller']}" == 'opencontrail' ]; then
- echo -e "${red}ERROR: OpenContrail is currently unsupported...exiting${reset}"
- exit 1
- elif [[ -z "${deploy_options_array['sdn_controller']}" || "${deploy_options_array['sdn_controller']}" == 'False' ]]; then
- echo -e "${blue}INFO: SDN Controller disabled...will deploy nosdn scenario${reset}"
- SDN_IMAGE=opendaylight
- else
- echo "${red}Invalid sdn_controller: ${deploy_options_array['sdn_controller']}${reset}"
- echo "${red}Valid choices are opendaylight, opendaylight-external, onos, opencontrail, False, or null${reset}"
- exit 1
- fi
-
-
-
- # Make sure the correct overcloud image is available
- if [ ! -f $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 ]; then
- echo "${red} $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 is required to execute your deployment."
- echo "Both ONOS and OpenDaylight are currently deployed from this image."
- echo "Please install the opnfv-apex package to provide this overcloud image for deployment.${reset}"
- exit 1
- fi
-
- echo "Copying overcloud image to Undercloud"
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "rm -f overcloud-full.qcow2"
- scp ${SSH_OPTIONS[@]} $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 "stack@$UNDERCLOUD":overcloud-full.qcow2
-
- # Install ovs-dpdk inside the overcloud image if it is enabled.
- if [ "${deploy_options_array['dataplane']}" == 'ovs_dpdk' ]; then
- # install dpdk packages before ovs
- echo -e "${blue}INFO: Enabling kernel modules for dpdk inside overcloud image${reset}"
-
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
- cat << EOF > vfio_pci.modules
-#!/bin/bash
-exec /sbin/modprobe vfio_pci >/dev/null 2>&1
-EOF
-
- cat << EOF > uio_pci_generic.modules
-#!/bin/bash
-exec /sbin/modprobe uio_pci_generic >/dev/null 2>&1
-EOF
-
- LIBGUESTFS_BACKEND=direct virt-customize --upload vfio_pci.modules:/etc/sysconfig/modules/ \
- --upload uio_pci_generic.modules:/etc/sysconfig/modules/ \
- --run-command "chmod 0755 /etc/sysconfig/modules/vfio_pci.modules" \
- --run-command "chmod 0755 /etc/sysconfig/modules/uio_pci_generic.modules" \
- --run-command "yum install -y /root/dpdk_rpms/*" \
- -a overcloud-full.qcow2
-EOI
- elif [ "${deploy_options_array['dataplane']}" != 'ovs' ]; then
- echo "${red}${deploy_options_array['dataplane']} not supported${reset}"
- exit 1
- fi
-
- # Set ODL version accordingly
- if [[ "${deploy_options_array['sdn_controller']}" == 'opendaylight' && "${deploy_options_array['odl_version']}" == 'boron' ]]; then
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
- LIBGUESTFS_BACKEND=direct virt-customize --run-command "yum -y remove opendaylight" \
- --run-command "yum -y install /root/boron/*" \
- -a overcloud-full.qcow2
-EOI
- fi
-
- # Add performance deploy options if they have been set
- if [ ! -z "${deploy_options_array['performance']}" ]; then
-
- # Remove previous kernel args files per role
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "rm -f Compute-kernel_params.txt"
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "rm -f Controller-kernel_params.txt"
-
- # Push performance options to subscript to modify per-role images as needed
- for option in "${performance_options[@]}" ; do
- echo -e "${blue}Setting performance option $option${reset}"
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "bash build_perf_image.sh $option"
- done
-
- # Build IPA kernel option ramdisks
- ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" <<EOI
-/bin/cp -f /home/stack/ironic-python-agent.initramfs /root/
-mkdir -p ipa/
-pushd ipa
-gunzip -c ../ironic-python-agent.initramfs | cpio -i
-if [ ! -f /home/stack/Compute-kernel_params.txt ]; then
- touch /home/stack/Compute-kernel_params.txt
- chown stack /home/stack/Compute-kernel_params.txt
-fi
-/bin/cp -f /home/stack/Compute-kernel_params.txt tmp/kernel_params.txt
-echo "Compute params set: "
-cat tmp/kernel_params.txt
-/bin/cp -f /root/image.py usr/lib/python2.7/site-packages/ironic_python_agent/extensions/image.py
-/bin/cp -f /root/image.pyc usr/lib/python2.7/site-packages/ironic_python_agent/extensions/image.pyc
-find . | cpio -o -H newc | gzip > /home/stack/Compute-ironic-python-agent.initramfs
-chown stack /home/stack/Compute-ironic-python-agent.initramfs
-if [ ! -f /home/stack/Controller-kernel_params.txt ]; then
- touch /home/stack/Controller-kernel_params.txt
- chown stack /home/stack/Controller-kernel_params.txt
-fi
-/bin/cp -f /home/stack/Controller-kernel_params.txt tmp/kernel_params.txt
-echo "Controller params set: "
-cat tmp/kernel_params.txt
-find . | cpio -o -H newc | gzip > /home/stack/Controller-ironic-python-agent.initramfs
-chown stack /home/stack/Controller-ironic-python-agent.initramfs
-popd
-/bin/rm -rf ipa/
-EOI
-
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml"
- fi
-
- # make sure ceph is installed
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml"
-
- # scale compute nodes according to inventory
- total_nodes=$(ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "cat /home/stack/instackenv.json | grep -c memory")
-
- # check if HA is enabled
- if [[ "$ha_enabled" == "True" ]]; then
- DEPLOY_OPTIONS+=" --control-scale 3"
- compute_nodes=$((total_nodes - 3))
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/puppet-pacemaker.yaml"
- else
- compute_nodes=$((total_nodes - 1))
- fi
-
- if [ "$compute_nodes" -le 0 ]; then
- echo -e "${red}ERROR: Invalid number of compute nodes: ${compute_nodes}. Check your inventory file.${reset}"
- exit 1
- else
- echo -e "${blue}INFO: Number of compute nodes set for deployment: ${compute_nodes}${reset}"
- DEPLOY_OPTIONS+=" --compute-scale ${compute_nodes}"
- fi
-
- if [[ "$net_isolation_enabled" == "TRUE" ]]; then
- #DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/network-isolation.yaml"
- DEPLOY_OPTIONS+=" -e network-environment.yaml"
- fi
-
- if [[ "$ha_enabled" == "True" ]] || [[ "$net_isolation_enabled" == "TRUE" ]]; then
- DEPLOY_OPTIONS+=" --ntp-server $ntp_server"
- fi
-
- if [[ ! "$virtual" == "TRUE" ]]; then
- DEPLOY_OPTIONS+=" --control-flavor control --compute-flavor compute"
- else
- DEPLOY_OPTIONS+=" -e virtual-environment.yaml"
- fi
-
- DEPLOY_OPTIONS+=" -e opnfv-environment.yaml"
-
- echo -e "${blue}INFO: Deploy options set:\n${DEPLOY_OPTIONS}${reset}"
-
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-if [ "$debug" == 'TRUE' ]; then
- LIBGUESTFS_BACKEND=direct virt-customize -a overcloud-full.qcow2 --root-password password:opnfvapex
-fi
-
-source stackrc
-set -o errexit
-echo "Uploading overcloud glance images"
-openstack overcloud image upload
-
-echo "Configuring undercloud and discovering nodes"
-openstack baremetal import --json instackenv.json
-openstack baremetal configure boot
-bash -x set_perf_images.sh ${performance_roles[@]}
-#if [[ -z "$virtual" ]]; then
-# openstack baremetal introspection bulk start
-#fi
-echo "Configuring flavors"
-for flavor in baremetal control compute; do
- echo -e "${blue}INFO: Updating flavor: \${flavor}${reset}"
- if openstack flavor list | grep \${flavor}; then
- openstack flavor delete \${flavor}
- fi
- openstack flavor create --id auto --ram 4096 --disk 39 --vcpus 1 \${flavor}
- if ! openstack flavor list | grep \${flavor}; then
- echo -e "${red}ERROR: Unable to create flavor \${flavor}${reset}"
- fi
-done
-openstack flavor set --property "cpu_arch"="x86_64" --property "capabilities:boot_option"="local" baremetal
-openstack flavor set --property "cpu_arch"="x86_64" --property "capabilities:boot_option"="local" --property "capabilities:profile"="control" control
-openstack flavor set --property "cpu_arch"="x86_64" --property "capabilities:boot_option"="local" --property "capabilities:profile"="compute" compute
-echo "Configuring nameserver on ctlplane network"
-dns_server_ext=''
-for dns_server in ${dns_servers}; do
- dns_server_ext="\${dns_server_ext} --dns-nameserver \${dns_server}"
-done
-neutron subnet-update \$(neutron subnet-list | grep -Ev "id|tenant|external|storage" | grep -v \\\\-\\\\- | awk {'print \$2'}) \${dns_server_ext}
-echo "Executing overcloud deployment, this should run for an extended period without output."
-sleep 60 #wait for Hypervisor stats to check-in to nova
-# save deploy command so it can be used for debugging
-cat > deploy_command << EOF
-openstack overcloud deploy --templates $DEPLOY_OPTIONS --timeout 90
-EOF
-EOI
-
- if [ "$interactive" == "TRUE" ]; then
- if ! prompt_user "Overcloud Deployment"; then
- echo -e "${blue}INFO: User requests exit${reset}"
- exit 0
- fi
- fi
-
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-source stackrc
-openstack overcloud deploy --templates $DEPLOY_OPTIONS --timeout 90
-if ! heat stack-list | grep CREATE_COMPLETE 1>/dev/null; then
- $(typeset -f debug_stack)
- debug_stack
- exit 1
-fi
-EOI
-
- # Configure DPDK
- if [ "${deploy_options_array['dataplane']}" == 'ovs_dpdk' ]; then
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI || (echo "DPDK config failed, exiting..."; exit 1)
-source stackrc
-set -o errexit
-for node in \$(nova list | grep novacompute | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+"); do
-echo "Running DPDK test app on \$node"
-ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
-set -o errexit
-sudo dpdk_helloworld --no-pci
-sudo dpdk_nic_bind -s
-EOF
-done
-EOI
- fi
-
- if [ "$debug" == 'TRUE' ]; then
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-source overcloudrc
-echo "Keystone Endpoint List:"
-openstack endpoint list
-echo "Keystone Service List"
-openstack service list
-cinder quota-show \$(openstack project list | grep admin | awk {'print \$2'})
-EOI
- fi
-}
-
-##Post configuration after install
-##params: none
-function configure_post_install {
- local opnfv_attach_networks ovs_ip ip_range net_cidr tmp_ip
- opnfv_attach_networks="admin_network public_network"
-
- echo -e "${blue}INFO: Post Install Configuration Running...${reset}"
-
- echo -e "${blue}INFO: Configuring ssh for root to overcloud nodes...${reset}"
- # copy host key to instack
- scp ${SSH_OPTIONS[@]} /root/.ssh/id_rsa.pub "stack@$UNDERCLOUD":jumphost_id_rsa.pub
-
- # add host key to overcloud nodes authorized keys
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" << EOI
-source stackrc
-nodes=\$(nova list | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
-for node in \$nodes; do
-cat ~/jumphost_id_rsa.pub | ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" 'cat >> ~/.ssh/authorized_keys'
-done
-EOI
-
- if [ "${deploy_options_array['dataplane']}" == 'ovs_dpdk' ]; then
- echo -e "${blue}INFO: Bringing up br-phy and ovs-agent for dpdk compute nodes...${reset}"
- compute_nodes=$(undercloud_connect stack "source stackrc; nova list | grep compute | wc -l")
- i=0
- while [ "$i" -lt "$compute_nodes" ]; do
- overcloud_connect compute${i} "sudo ifup br-phy; sudo systemctl restart neutron-openvswitch-agent"
- i=$((i + 1))
- done
- fi
-
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-source overcloudrc
-set -o errexit
-echo "Configuring Neutron external network"
-neutron net-create external --router:external=True --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }')
-neutron subnet-create --name external-net --tenant-id \$(openstack project show service | grep id | awk '{ print \$4 }') --disable-dhcp external --gateway ${public_network_gateway} --allocation-pool start=${public_network_floating_ip_range%%,*},end=${public_network_floating_ip_range##*,} ${public_network_cidr}
-
-echo "Removing sahara endpoint and service"
-sahara_service_id=\$(openstack service list | grep sahara | cut -d ' ' -f 2)
-sahara_endpoint_id=\$(openstack endpoint list | grep sahara | cut -d ' ' -f 2)
-openstack endpoint delete \$sahara_endpoint_id
-openstack service delete \$sahara_service_id
-
-echo "Removing swift endpoint and service"
-swift_service_id=\$(openstack service list | grep swift | cut -d ' ' -f 2)
-swift_endpoint_id=\$(openstack endpoint list | grep swift | cut -d ' ' -f 2)
-openstack endpoint delete \$swift_endpoint_id
-openstack service delete \$swift_service_id
-
-if [ "${deploy_options_array['congress']}" == 'True' ]; then
- for s in nova neutronv2 ceilometer cinder glancev2 keystone; do
- openstack congress datasource create \$s "\$s" \\
- --config username=\$OS_USERNAME \\
- --config tenant_name=\$OS_TENANT_NAME \\
- --config password=\$OS_PASSWORD \\
- --config auth_url=\$OS_AUTH_URL
- done
-fi
-EOI
-
- echo -e "${blue}INFO: Checking if OVS bridges have IP addresses...${reset}"
- for network in ${opnfv_attach_networks}; do
- ovs_ip=$(find_ip ${NET_MAP[$network]})
- tmp_ip=''
- if [ -n "$ovs_ip" ]; then
- echo -e "${blue}INFO: OVS Bridge ${NET_MAP[$network]} has IP address ${ovs_ip}${reset}"
- else
- echo -e "${blue}INFO: OVS Bridge ${NET_MAP[$network]} missing IP, will configure${reset}"
- # use last IP of allocation pool
- eval "ip_range=\${${network}_usable_ip_range}"
- ovs_ip=${ip_range##*,}
- eval "net_cidr=\${${network}_cidr}"
- sudo ip addr add ${ovs_ip}/${net_cidr##*/} dev ${NET_MAP[$network]}
- sudo ip link set up ${NET_MAP[$network]}
- tmp_ip=$(find_ip ${NET_MAP[$network]})
- if [ -n "$tmp_ip" ]; then
- echo -e "${blue}INFO: OVS Bridge ${NET_MAP[$network]} IP set: ${tmp_ip}${reset}"
- continue
- else
- echo -e "${red}ERROR: Unable to set OVS Bridge ${NET_MAP[$network]} with IP: ${ovs_ip}${reset}"
- return 1
- fi
- fi
- done
-
- # for virtual, we NAT public network through Undercloud
- if [ "$virtual" == "TRUE" ]; then
- if ! configure_undercloud_nat ${public_network_cidr}; then
- echo -e "${red}ERROR: Unable to NAT undercloud with external net: ${public_network_cidr}${reset}"
- exit 1
- else
- echo -e "${blue}INFO: Undercloud VM has been setup to NAT Overcloud public network${reset}"
- fi
- fi
-
- # for sfc deployments we need the vxlan workaround
- if [ "${deploy_options_array['sfc']}" == 'True' ]; then
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-source stackrc
-set -o errexit
-for node in \$(nova list | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+"); do
-ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
-sudo ifconfig br-int up
-sudo ip route add 123.123.123.0/24 dev br-int
-EOF
-done
-EOI
- fi
-
- # Collect deployment logs
- ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" <<EOI
-mkdir -p ~/deploy_logs
-rm -rf deploy_logs/*
-source stackrc
-set -o errexit
-for node in \$(nova list | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+"); do
- ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
- sudo cp /var/log/messages /home/heat-admin/messages.log
- sudo chown heat-admin /home/heat-admin/messages.log
-EOF
-scp ${SSH_OPTIONS[@]} heat-admin@\$node:/home/heat-admin/messages.log ~/deploy_logs/\$node.messages.log
-if [ "$debug" == "TRUE" ]; then
- nova list --ip \$node
- echo "---------------------------"
- echo "-----/var/log/messages-----"
- echo "---------------------------"
- cat ~/deploy_logs/\$node.messages.log
- echo "---------------------------"
- echo "----------END LOG----------"
- echo "---------------------------"
-fi
- ssh -T ${SSH_OPTIONS[@]} "heat-admin@\$node" <<EOF
- sudo rm -f /home/heat-admin/messages.log
-EOF
-done
-
-# Print out the undercloud IP and dashboard URL
-source stackrc
-echo "Undercloud IP: $UNDERCLOUD, please connect by doing 'opnfv-util undercloud'"
-echo "Overcloud dashboard available at http://\$(heat output-show overcloud PublicVip | sed 's/"//g')/dashboard"
-EOI
-
-}
-
display_usage() {
echo -e "Usage:\n$0 [arguments] \n"
echo -e " -d|--deploy-settings : Full path to deploy settings yaml file. Optional. Defaults to null"
;;
--flat )
net_isolation_enabled="FALSE"
+ net_isolation_arg="--flat"
echo "Underlay Network Isolation Disabled: using flat configuration"
shift 1
;;
}
-##END FUNCTIONS
-
main() {
parse_cmdline "$@"
+ if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
+ echo -e "${blue}INFO: Parsing deploy settings file...${reset}"
+ parse_deploy_settings
+ fi
echo -e "${blue}INFO: Parsing network settings file...${reset}"
parse_network_settings
if ! configure_deps; then
echo -e "${red}Dependency Validation Failed, Exiting.${reset}"
exit 1
fi
- if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
- echo -e "${blue}INFO: Parsing deploy settings file...${reset}"
- parse_deploy_settings
- fi
setup_undercloud_vm
if [ "$virtual" == "TRUE" ]; then
setup_virtual_baremetal $VM_CPUS $VM_RAM
parse_inventory_file
fi
configure_undercloud
- undercloud_prep_overcloud_deploy
+ overcloud_deploy
if [ "$post_config" == "TRUE" ]; then
if ! configure_post_install; then
echo -e "${red}ERROR:Post Install Configuration Failed, Exiting.${reset}"
Code Review / apex.git / blobdiff