Merge "adding new scenraio documentation and updated the current one."
[joid.git] / ci / deploy.sh
old mode 100644 (file)
new mode 100755 (executable)
index 9f263f3..05fc462
 #!/bin/bash
-<<<<<<< HEAD
-#placeholder for deployment script.
+
 set -ex
 
-cp intel/pod5/kilo/odl/nonha/deploy.sh ./deployopnfv.sh
+#need to put mutiple cases here where decide this bundle to deploy by default use the odl bundle.
+# Below parameters are the default and we can according the release
 
-echo "bootstrap started"
-juju bootstrap --debug --to bootstrap.maas
-sleep 15
-juju deploy juju-gui --to 0
+opnfvsdn=nosdn
+opnfvtype=nonha
+openstack=newton
+opnfvlab=default
+opnfvrel=d
+opnfvfeature=none
+opnfvdistro=xenial
+opnfvarch=amd64
+opnfvmodel=openstack
 
-echo "bootstrap finished"
+jujuver=`juju --version`
 
-./deployopnfv.sh
+read_config() {
+    opnfvrel=`grep release: deploy.yaml | cut -d ":" -f2`
+    openstack=`grep openstack: deploy.yaml | cut -d ":" -f2`
+    opnfvtype=`grep type: deploy.yaml | cut -d ":" -f2`
+    opnfvlab=`grep lab: deploy.yaml | cut -d ":" -f2`
+    opnfvsdn=`grep sdn: deploy.yaml | cut -d ":" -f2`
+}
 
-=======
+usage() { echo "Usage: $0 [-s <nosdn|odl|opencontrail>]
+                         [-t <nonha|ha|tip>]
+                         [-o <juno|liberty>]
+                         [-l <default|intelpod5>]
+                         [-f <ipv6,dpdk,lxd,dvr>]
+                         [-d <trusty|xenial>]
+                         [-a <amd64>]
+                         [-m <openstack|kubernetes>]
+                         [-r <a|b>]" 1>&2 exit 1; }
 
-set -ex
-./01-bootstrap.sh
+while getopts ":s:t:o:l:h:r:f:d:a:m:" opt; do
+    case "${opt}" in
+        s)
+            opnfvsdn=${OPTARG}
+            ;;
+        t)
+            opnfvtype=${OPTARG}
+            ;;
+        o)
+            openstack=${OPTARG}
+            ;;
+        l)
+            opnfvlab=${OPTARG}
+            ;;
+        r)
+            opnfvrel=${OPTARG}
+            ;;
+        f)
+            opnfvfeature=${OPTARG}
+            ;;
+        d)
+            opnfvdistro=${OPTARG}
+            ;;
+        a)
+            opnfvarch=${OPTARG}
+            ;;
+        m)
+            opnfvmodel=${OPTARG}
+            ;;
+        h)
+            usage
+            ;;
+        *)
+            ;;
+    esac
+done
+
+#by default maas creates two VMs in case of three more VM needed.
+createresource() {
+    # TODO: make sure this function run with the same parameters used in 03-maasdeploy.sh
+    PROFILE=${PROFILE:-ubuntu}
+    MAAS_IP=$(grep " ip_address" deployconfig.yaml | cut -d ':' -f 2 | sed -e 's/ //')
+    API_SERVER="http://$MAAS_IP/MAAS/api/2.0"
+    API_KEY=`sudo maas-region apikey --username=ubuntu`
+    maas login $PROFILE $API_SERVER $API_KEY
+
+    for node in node3-control node4-control
+    do
+        node_id=$(maas $PROFILE machines read | \
+                  jq -r ".[] | select(.hostname == \"$node\").system_id")
+        if [[ -z "$node_id" ]]; then
+            sudo virt-install --connect qemu:///system --name $node \
+                --ram 8192 --cpu host --vcpus 4 \
+                --disk size=120,format=qcow2,bus=virtio,io=native,pool=default \
+                --network bridge=virbr0,model=virtio \
+                --network bridge=virbr0,model=virtio \
+                --boot network,hd,menu=off \
+                --noautoconsole --vnc --print-xml | tee _node.xml
+            node_mac=$(grep "mac address" _node.xml | head -1 | cut -d "'" -f 2)
+            sudo virsh -c qemu:///system define --file _node.xml
+            rm -f _node.xml
+
+            maas $PROFILE nodes new autodetect_nodegroup='yes' name=$node \
+                tags='control' hostname=$name power_type='virsh' \
+                mac_addresses=$node3controlmac \
+                power_parameters_power_address="qemu+ssh://$USER@192.168.122.1/system" \
+                architecture='amd64/generic' power_parameters_power_id='node3-control'
+            node_id=$(maas $PROFILE machines read | \
+                  jq -r ".[] | select(.hostname == \"$node\").system_id")
+        fi
+        if [[ -z "$node_id" ]]; then
+            echo "Error: failed to create node $node ."
+            exit 1
+        fi
+        maas $PROFILE tag update-nodes control add=$node_id || true
+    done
+}
+
+#copy the files and create extra resources needed for HA deployment
+# in case of default VM labs.
+deploy() {
+    if [[ "$jujuver" > "2" ]]; then
+        if [ ! -f ./labconfig.yaml ] && [ -e ~/joid_config/labconfig.yaml ]; then
+            cp ~/joid_config/labconfig.yaml ./labconfig.yaml
+
+            if [ ! -f ./deployconfig.yaml ] && [ -e ~/joid_config/deployconfig.yaml ]; then
+                cp ~/joid_config/deployconfig.yaml ./deployconfig.yaml
+            else
+                python genDeploymentConfig.py -l labconfig.yaml > deployconfig.yaml
+            fi
+        else
+            if [ -e ./labconfig.yaml ]; then
+                if [ ! -f ./deployconfig.yaml ] && [ -e ~/joid_config/deployconfig.yaml ]; then
+                    cp ~/joid_config/deployconfig.yaml ./deployconfig.yaml
+                else
+                    python genDeploymentConfig.py -l labconfig.yaml > deployconfig.yaml
+                fi
+            else
+                echo " MAAS not deployed please deploy MAAS first."
+            fi
+        fi
+    else
+        if [ ! -f ./environments.yaml ] && [ -e ~/.juju/environments.yaml ]; then
+            cp ~/.juju/environments.yaml ./environments.yaml
+        elif [ ! -f ./environments.yaml ] && [ -e ~/joid_config/environments.yaml ]; then
+            cp ~/joid_config/environments.yaml ./environments.yaml
+        fi
+        #copy the script which needs to get deployed as part of ofnfv release
+        echo "...... deploying now ......"
+        echo "   " >> environments.yaml
+        echo "        enable-os-refresh-update: false" >> environments.yaml
+        echo "        enable-os-upgrade: false" >> environments.yaml
+        echo "        admin-secret: admin" >> environments.yaml
+        echo "        default-series: $opnfvdistro" >> environments.yaml
+        cp environments.yaml ~/.juju/
+        cp environments.yaml ~/joid_config/
+    fi
+
+    if [[ "$opnfvtype" = "ha" && "$opnfvlab" = "default" ]]; then
+        createresource
+    fi
+
+    #bootstrap the node
+    ./01-bootstrap.sh
+
+    if [[ "$jujuver" > "2" ]]; then
+        juju model-config default-series=$opnfvdistro enable-os-refresh-update=false enable-os-upgrade=false
+    fi
+
+    #case default deploy the opnfv platform:
+    ./02-deploybundle.sh $opnfvtype $openstack $opnfvlab $opnfvsdn $opnfvfeature $opnfvdistro $opnfvmodel
+}
+
+#check whether charms are still executing the code even juju-deployer says installed.
+check_status() {
+    retval=0
+    timeoutiter=0
+
+    echo -n "executing the reltionship within charms ."
+    while [ $retval -eq 0 ]; do
+       sleep 30
+       if juju status | grep -q "executing"; then
+           echo -n '.'
+           if [ $timeoutiter -ge 120 ]; then
+               echo 'timed out'
+               retval=1
+           fi
+           timeoutiter=$((timeoutiter+1))
+       else
+           echo 'done'
+           retval=1
+       fi
+    done
+
+    if [[ "$opnfvmodel" = "openstack" ]]; then
+        juju expose ceph-radosgw || true
+        #juju ssh ceph/0 \ 'sudo radosgw-admin user create --uid="ubuntu" --display-name="Ubuntu Ceph"'
+    fi
+    echo "...... deployment finishing ......."
+}
+
+echo "...... deployment started ......"
+deploy
+
+check_status
+
+echo "...... deployment finished  ......."
+
+if [[ "$opnfvmodel" = "openstack" ]]; then
+    ./openstack.sh "$opnfvsdn" "$opnfvlab" "$opnfvdistro" "$openstack" || true
+
+    # creating heat domain after puching the public API into /etc/hosts
+
+    if [[ "$jujuver" > "2" ]]; then
+        status=`juju run-action heat/0 domain-setup`
+        echo $status
+    else
+        status=`juju action do heat/0 domain-setup`
+        echo $status
+    fi
 
-#need to put mutiple cases here where decide this bundle to deploy by default use the odl bundle.
 
-#case deploy opencontrail 
-#cp ./opencontrail/01-deploybundle.sh ./01-deploybundle.sh
+    sudo ../juju/get-cloud-images || true
+    ../juju/joid-configure-openstack || true
 
-#case deploy ODL bundle
-cp ./odl/01-deploybundle.sh ./01-deploybundle.sh
+fi
+if [[ "$opnfvmodel" = "kubernetes" ]]; then
+    ./k8.sh
+fi
 
-#case default:
-./01-deploybundle.sh
+# expose the juju gui-url to login into juju gui
 
-#case ha:
-#./01-deploybundle.sh ha
+echo " ...... JUJU GUI can be access using the below URL ...... "
+juju gui --show-credentials --no-browser
 
-#case tip
-#./01-deploybundle.sh tip
->>>>>>> 3b30953... Added a script to have a openstack with odl bundle.
+echo "...... finished  ......."