#!/bin/bash
#
-# Copyright 2015 Intel Corporation.
+# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# where job_type is one of "verify", "merge", "daily"
#
-# configuration
+# exit codes
#
EXIT=0
+EXIT_TC_FAILED=1
+EXIT_SANITY_TC_FAILED=2
+EXIT_NO_RESULTS=10
+EXIT_NO_TEST_REPORT_LOG_DIR=11
+
+#
+# configuration
+#
+
VSPERF_BIN='./vsperf'
-LOG_FILE_USER='/tmp/vsperf_user.log'
-LOG_FILE_VANILLA='/tmp/vsperf_vanilla.log'
-LOG_FILE_PREFIX="/tmp/vsperf_build_"
-OPNFV_POD="intel-pod3"
+LOG_FILE_PREFIX="/tmp/vsperf_build"
+DATE=$(date -u +"%Y-%m-%d_%H-%M-%S")
+BRANCH=${GIT_BRANCH##*/}
+VSPERFENV_DIR="$HOME/vsperfenv"
# CI job specific configuration
# VERIFY - run basic set of TCs with default settings
-TESTCASES_VERIFY="phy2phy_tput pvp_tput"
-TESTPARAM_VERIFY=""
+TESTCASES_VERIFY="vswitch_add_del_bridge vswitch_add_del_bridges vswitch_add_del_vport vswitch_add_del_vports vswitch_vports_add_del_flow"
+TESTPARAM_VERIFY="--integration"
# MERGE - run selected TCs with default settings
-TESTCASES_MERGE="phy2phy_tput back2back phy2phy_cont pvp_tput pvvp_tput"
-TESTPARAM_MERGE=""
+TESTCASES_MERGE="vswitch_add_del_bridge vswitch_add_del_bridges vswitch_add_del_vport vswitch_add_del_vports vswitch_vports_add_del_flow"
+TESTPARAM_MERGE="--integration"
# DAILY - run selected TCs for defined packet sizes
TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back'
-TESTPARAM_DAILY='--test-params pkt_sizes=64,128,512,1024,1518'
+TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'
# check if user config file exists if not then we will use default settings
-[ -f $HOME/vsperf.conf ] && CONF_FILE="--conf-file ${HOME}/vsperf.conf" || CONF_FILE=""
+if [ -f $HOME/vsperf-${BRANCH}.conf ] ; then
+ # branch specific config was found
+ CONF_FILE="--conf-file ${HOME}/vsperf-${BRANCH}.conf"
+else
+ if [ -f $HOME/vsperf.conf ] ; then
+ CONF_FILE="--conf-file ${HOME}/vsperf.conf"
+ else
+ CONF_FILE=""
+ fi
+fi
+
+# Test report related configuration
+TEST_REPORT_PARTIAL="*_test_report.rst"
+TEST_REPORT_DIR="${WORKSPACE}/docs/results"
+TEST_REPORT_INDEX="${TEST_REPORT_DIR}/index.rst"
+TEST_REPORT_LINK_OLD="https://wiki.opnfv.org/wiki/vsperf_results"
+TEST_REPORT_FILE="${WORKSPACE}/docs_output/results/results.pdf"
+TEST_REPORT_TARBALL="vswitchperf_logs_${DATE}.tar.gz"
+
+if [[ "x${BRANCH}" == "xmaster" ]]; then
+ TEST_REPORT_LINK_NEW="https://artifacts.opnfv.org/logs/$PROJECT/$NODE_NAME/$DATE/${TEST_REPORT_TARBALL}"
+else
+ TEST_REPORT_LINK_NEW="https://artifacts.opnfv.org/logs/$PROJECT/$NODE_NAME/$BRANCH/$DATE/${TEST_REPORT_TARBALL}"
+fi
+
+TEST_REPORT_LOG_DIR="${HOME}/opnfv/$PROJECT/results/$BRANCH"
#
# functions
# $1 - directory with results
function print_results() {
for i in $TESTCASES ; do
- if [[ $i == *"pvp"* ]]; then
- DEPLOYMENT="pvp"
- elif [[ $i == *"pvvp"* ]]; then
- DEPLOYMENT="pvvp"
- else
- DEPLOYMENT="p2p"
- fi
- RES_FILE="result_${i}_${DEPLOYMENT}.csv"
+ RES_FILE=`ls -1 $1 | egrep "result_${i}_[0-9a-zA-Z\-]+.csv"`
- if [ -e "${1}/${RES_FILE}" ]; then
- printf " %-70s %-6s\n" $RES_FILE "OK"
+ if [ "x$RES_FILE" != "x" -a -e "${1}/${RES_FILE}" ]; then
+ if grep ^FAILED "${1}/${RES_FILE}" &> /dev/null ; then
+ printf " %-70s %-6s\n" "result_${i}" "FAILED"
+ EXIT=$EXIT_TC_FAILED
+ else
+ printf " %-70s %-6s\n" "result_${i}" "OK"
+ fi
else
- printf " %-70s %-6s\n" $RES_FILE "FAILED"
- EXIT=1
+ printf " %-70s %-6s\n" "result_${i}" "FAILED"
+ EXIT=$EXIT_TC_FAILED
fi
done
}
# execute tests and display results
# parameters:
-# $1 - vswitch and vnf combination, one of OVS_vanilla, OVS_with_DPDK_and_vHost_Cuse, OVS_with_DPDK_and_vHost_User
+# $1 - vswitch and vnf combination, one of OVS_vanilla, OVS_with_DPDK_and_vHost_User
# $2 - CI job type, one of verify, merge, daily
function execute_vsperf() {
- # figure out log file name
- LOG_FILE="${LOG_FILE_PREFIX}"`date "+%Y%m%d_%H%M%S%N"`".log"
-
+ OPNFVPOD=""
# figure out list of TCs and execution parameters
case $2 in
"verify")
TESTCASES=$TESTCASES_MERGE
;;
*)
- # by default use daily build
+ # by default use daily build and upload results to the OPNFV databse
TESTPARAM=$TESTPARAM_DAILY
TESTCASES=$TESTCASES_DAILY
+ OPNFVPOD="--opnfvpod=$NODE_NAME"
;;
esac
# execute testcases
echo -e "\nExecution of VSPERF for $1"
- # vsperf must be executed directly from vsperf directory
- cd ..
+
+ DATE_SUFFIX=$(date -u +"%Y-%m-%d_%H-%M-%S")
+
case $1 in
"OVS_vanilla")
- echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
- $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
- ;;
- "OVS_with_DPDK_and_vHost_Cuse")
- echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
- $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
+ # figure out log file name
+ LOG_SUBDIR="OvsVanilla"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+
+ echo " $VSPERF_BIN $OPNFVPOD --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE"
+ $VSPERF_BIN $OPNFVPOD --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
;;
*)
- echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE"
- $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
+ # figure out log file name
+ LOG_SUBDIR="OvsDpdkVhost"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+
+ echo " $VSPERF_BIN $OPNFVPOD --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE"
+ $VSPERF_BIN $OPNFVPOD --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE
;;
esac
- # let's go back to CI dir
- cd -
# evaluation of results
echo -e "\nResults for $1"
- RES_DIR=`grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-`
- if [ "x" == "x${RES_DIR}" ] ; then
+ RES_DIR="/$(grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-)"
+ if [[ "/" == "${RES_DIR}" ]] ; then
echo "FAILURE: Results are not available."
+ echo "-------------------------------------------------------------------"
+ cat $LOG_FILE
+ echo "-------------------------------------------------------------------"
+ exit $EXIT_NO_RESULTS
+ else
+ print_results "${RES_DIR}"
+ if [ "$EXIT" -eq "$EXIT_TC_FAILED" ] ; then
+ echo "-------------------------------------------------------------------"
+ cat $LOG_FILE
+ echo "-------------------------------------------------------------------"
+ fi
+ fi
+
+ # show detailed result figures
+ for md_file in $(grep '\.md"$' $LOG_FILE | cut -d'"' -f2); do
+ # TC resut file header
+ echo -e "\n-------------------------------------------------------------------"
+ echo -e " $md_file"
+ echo -e "-------------------------------------------------------------------\n"
+ # TC details
+ sed -n '/^- Test ID/,/Bidirectional/{/Packet size/b;p;/Bidirectional/q};/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file
+ # TC results
+ sed -n '/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file | grep -v "Unknown" | cat -s
+ done
+
+ # add test results into the final doc template
+ for report in ${RES_DIR}/${TEST_REPORT_PARTIAL} ; do
+ # modify link to the artifactory with test report and logs
+ if [ -f $report ] ; then
+ sed -i -e "s,$TEST_REPORT_LINK_OLD,$TEST_REPORT_LINK_NEW," "$report"
+ cp $report $TEST_REPORT_DIR
+ echo " $(basename $report)" >> $TEST_REPORT_INDEX
+ fi
+ done
+
+ # copy logs into dedicated directory
+ mkdir ${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}
+ [ -f "$LOG_FILE" ] && cp -a "${LOG_FILE}" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null
+ [ -d "$RES_DIR" ] && cp -ar "$RES_DIR" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null
+}
+
+# generates final test_report in PDF and HTML formats
+function generate_report() {
+
+ # prepare final tarball with all logs...
+ tar --exclude "${TEST_REPORT_TARBALL}" -czf "${TEST_REPORT_LOG_DIR}/${TEST_REPORT_TARBALL}" $(find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d)
+ # ...and remove original log files
+ find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d -exec rm -rf \{\} \;
+
+ # clone opnfvdocs repository
+ echo "Cloning opnfvdocs repository..."
+ [ -d opnfvdocs ] && rm -rf opnfvdocs
+ git clone https://gerrit.opnfv.org/gerrit/opnfvdocs &> /dev/null
+
+ # generate final docs with test results
+ echo "Generating test report..."
+ sed -ie 's,python ,python2 ,g' ./opnfvdocs/scripts/docs-build.sh
+ OPNFVDOCS_DIR='./opnfvdocs' ./opnfvdocs/scripts/docs-build.sh &> /dev/null
+
+ # store PDF with test results into dedicated directory
+ if [ -f $TEST_REPORT_FILE ] ; then
+ cp -a $TEST_REPORT_FILE $TEST_REPORT_LOG_DIR
+ echo "Final test report has been created."
+ else
+ echo "FAILURE: Generation of final test report has failed."
+ fi
+}
+
+# pushes test report and logs collected during test execution into artifactory
+function push_results_to_artifactory() {
+ # clone releng repository
+ echo "Cloning releng repository..."
+ [ -d releng ] && rm -rf releng
+ git clone https://gerrit.opnfv.org/gerrit/releng &> /dev/null
+
+ echo "Pushing results and logs into artifactory..."
+ . ./releng/utils/push-test-logs.sh "$DATE"
+
+ # enter workspace as it could be modified by 3rd party script
+ cd $WORKSPACE
+}
+
+# removes any local changes of repository
+function cleanup() {
+ echo "Cleaning up..."
+ git stash -u
+}
+
+# prepares directory for logs collection and removes old logs
+function initialize_logdir() {
+ if [[ "x$TEST_REPORT_LOG_DIR" == "x" ]] ; then
+ echo "FAILURE: Logging directory is not defined. Logs and report cannot be published!"
+ exit $EXIT_NO_TEST_REPORT_LOG_DIR
else
- print_results "/${RES_DIR}"
+ # remove TEST_REPORT_LOG_DIR if it exists
+ if [ -e $TEST_REPORT_LOG_DIR ] ; then
+ if [ -f $TEST_REPORT_LOG_DIR ] ; then
+ rm $TEST_REPORT_LOG_DIR
+ else
+ rm -rf ${TEST_REPORT_LOG_DIR}
+ fi
+ fi
+ # create TEST_REPORT_LOG_DIR
+ mkdir -p $TEST_REPORT_LOG_DIR
+ fi
+}
+
+# verify basic vsperf functionality
+function execute_vsperf_sanity() {
+ DATE_SUFFIX=$(date -u +"%Y-%m-%d_%H-%M-%S")
+ LOG_FILE="${LOG_FILE_PREFIX}_sanity_${DATE_SUFFIX}.log"
+ echo "Execution of VSPERF sanity checks:"
+ for PARAM in '--version' '--help' '--list-trafficgens' '--list-collectors' '--list-vswitches' '--list-fwdapps' '--list-vnfs' '--list-settings' '--list' '--integration --list'; do
+ echo -e "-------------------------------------------------------------------" >> $LOG_FILE
+ echo "$VSPERF_BIN $PARAM $CONF_FILE" >> $LOG_FILE
+ echo -e "-------------------------------------------------------------------" >> $LOG_FILE
+ $VSPERF_BIN $PARAM $CONF_FILE &>> $LOG_FILE
+ if $VSPERF_BIN $PARAM $CONF_FILE &>> $LOG_FILE ; then
+ printf " %-70s %-6s\n" "$VSPERF_BIN $PARAM" "OK"
+ else
+ printf " %-70s %-6s\n" "$VSPERF_BIN $PARAM" "FAILED"
+ EXIT=$EXIT_SANITY_TC_FAILED
+ fi
+ echo >> $LOG_FILE
+ done
+ echo "Sanity log file $LOG_FILE"
+ if [ "$EXIT" -ne "0" ] ; then
+ echo "-------------------------------------------------------------------"
+ cat $LOG_FILE
+ echo "-------------------------------------------------------------------"
+ fi
+}
+
+# check and install required packages at nodes running VERIFY and MERGE jobs
+function dependencies_check() {
+ . /etc/os-release
+ if [ $ID == "ubuntu" ] ; then
+ echo "Dependencies check"
+ echo "=================="
+ for PACKAGE in "python3-tk" ; do
+ if dpkg -s $PACKAGE &> /dev/null ; then
+ printf " %-70s %-6s\n" $PACKAGE "OK"
+ else
+ printf " %-70s %-6s\n" $PACKAGE "missing"
+ sudo apt-get install -y $PACKAGE
+ fi
+ done
+ echo
fi
}
# main
#
+echo
+
+# enter workspace dir
+cd $WORKSPACE
+
+# create virtualenv if needed
+if [ ! -e $VSPERFENV_DIR ] ; then
+ echo "Create VSPERF environment"
+ echo "========================="
+ virtualenv --python=python3 "$VSPERFENV_DIR"
+ echo
+fi
+
+# acivate and update virtualenv
+echo "Update VSPERF environment"
+echo "========================="
+source "$VSPERFENV_DIR"/bin/activate
+pip install -r ./requirements.txt
+echo
+
+# VERFIY&MERGE job specific - check if required packages are installed
+dependencies_check
+
+# initialization
+initialize_logdir
+
# execute job based on passed parameter
case $1 in
"verify")
+ echo "================="
echo "VSPERF verify job"
echo "================="
- #execute_vsperf OVS_with_DPDK_and_vHost_User $1
+ terminate_vsperf
+ execute_vsperf_sanity
+ terminate_vsperf
+ execute_vsperf OVS_with_DPDK_and_vHost_User $1
+ terminate_vsperf
+ execute_vsperf OVS_vanilla $1
exit $EXIT
;;
"merge")
+ echo "================"
echo "VSPERF merge job"
echo "================"
- #execute_vsperf OVS_with_DPDK_and_vHost_User $1
+ terminate_vsperf
+ execute_vsperf_sanity
+ terminate_vsperf
+ execute_vsperf OVS_with_DPDK_and_vHost_User $1
+ terminate_vsperf
+ execute_vsperf OVS_vanilla $1
exit $EXIT
;;
*)
+ echo "================"
echo "VSPERF daily job"
echo "================"
execute_vsperf OVS_vanilla $1
terminate_vsperf
+ generate_report
+
+ push_results_to_artifactory
+
+ cleanup
+
exit $EXIT
;;
esac
Code Review / vswitchperf.git / blobdiff