Tune CENGN Lynx Lab Pod1 DHCP Address Ranges for HA

[joid.git] / ci / 01-deploybundle.sh

diff --git a/ci/01-deploybundle.sh b/ci/01-deploybundle.sh
index 8164c7e..f65c4dc 100755 (executable)
--- a/ci/01-deploybundle.sh
+++ b/ci/01-deploybundle.sh
@@ -26,7 +26,7 @@ case "$3" in
         # choose the correct interface to use for data network
          sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 192.168.12.0\/24/g' ./bundles.yaml
         # Choose the external port to go out from gateway to use.
-         sed -i -- 's/#        "ext-port": "eth1"/        "ext-port": "eth1"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
          ;;
      'intelpod6' )
         # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
@@ -34,7 +34,9 @@ case "$3" in
         # choose the correct interface to use for data network
          sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
         # Choose the external port to go out from gateway to use.
-         sed -i -- 's/#        "ext-port": "eth1"/        "ext-port": "eth2"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+        # Provide the gateway MAC to route the traffic externally.
+         sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
          ;;
      'intelpod5' )
         # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
@@ -42,21 +44,40 @@ case "$3" in
         # choose the correct interface to use for data network
          sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
         # Choose the external port to go out from gateway to use.
-         sed -i -- 's/#        "ext-port": "eth1"/        "ext-port": "eth2.724"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2.724"/g' ./bundles.yaml
+        # Provide the gateway MAC to route the traffic externally.
+         sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
         ;;
      'attvirpod1' )
         # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
          sed -i -- 's/10.4.1.1/192.168.10.1/g' ./bundles.yaml
         # Choose the external port to go out from gateway to use.
-         sed -i -- 's/#        "ext-port": "eth1"/        "ext-port": "eth1"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
         ;;
      'cengnlynxpod1' )
+        # Chose the hard drive(s) to use for CEPH OSD
+         sed -i -- 's|osd-devices: /srv|osd-devices: /dev/sdb|g' ./bundles.yaml
+        # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
          sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
-         sed -i -- 's/#        "ext-port": "eth1"/        "ext-port": "eth2.1202"/g' ./bundles.yaml
+        # choose the correct interface to use for data network
+         sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 172.16.121.0\/24/g' ./bundles.yaml
+        # Choose the external port to go out from gateway to use.
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1.1202"/g' ./bundles.yaml
+        ;;
+     'juniperpod1' )
+         sed -i -- 's/10.4.1.1/172.16.50.1/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+         ;;
+     'ravellodemopod' )
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+        ;;
+     'custom' )
+         sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
         ;;
      'default' )
          sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
-         sed -i -- 's/#        "ext-port": "eth1"/        "ext-port": "eth1"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
         ;;
 esac
 
@@ -64,32 +85,45 @@ case "$5" in
     'ipv6' )
          sed -i -- 's/#prefer-ipv6: true/prefer-ipv6: true/g' ./bundles.yaml
         ;;
+    'dvr' )
+         sed -i -- 's/#enable-dvr: true/enable-dvr: true/g' ./bundles.yaml
+         sed -i -- 's/#l2-population: true/l2-population: true/g' ./bundles.yaml
+        ;;
+    'sfc' )
+         sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-sfc"/g' ./bundles.yaml
+        ;;
+    'vpn' )
+         sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-vpn"/g' ./bundles.yaml
+        ;;
+    'odl_l3' )
+         sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-l3"/g' ./bundles.yaml
+        ;;
 esac
 
 echo "... Deployment Started ...."
 case "$1" in
     'nonha' )
-        juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+        juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
         juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
         ;;
     'ha' )
-        juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+        juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
         juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
         ;;
     'tip' )
-        juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+        juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
         juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
         ;;
     * )
-        juju-deployer -vW -d -c bundles.yaml trusty-"$2"-nodes
+        juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
         juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
         ;;
 esac
 
-case "$4" in
-    'onos' )
-         echo "... onos prepare test ..."
-         sleep 180s
-         sh onos/juju_test_prepare.sh "$3"
-        ;;
-esac
+#case "$4" in
+#    'onos' )
+#         echo "... onos prepare test ..."
+#         sleep 180s
+#         sh onos/juju_test_prepare.sh "$3"
+#        ;;
+#esac