# choose the correct interface to use for data network
sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 192.168.12.0\/24/g' ./bundles.yaml
# Choose the external port to go out from gateway to use.
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth1"/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
;;
'intelpod6' )
# As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
- sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+ sed -i -- 's/10.4.1.1/10.6.1.2/g' ./bundles.yaml
# choose the correct interface to use for data network
- sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.6.12.0\/24/g' ./bundles.yaml
# Choose the external port to go out from gateway to use.
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth2"/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+ # Provide the gateway MAC to route the traffic externally.
+ sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
;;
'intelpod5' )
# As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
- sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+ sed -i -- 's/10.4.1.1/10.5.1.2/g' ./bundles.yaml
# choose the correct interface to use for data network
- sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.5.12.0\/24/g' ./bundles.yaml
# Choose the external port to go out from gateway to use.
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth2.724"/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+ # Provide the gateway MAC to route the traffic externally.
+ sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
;;
'attvirpod1' )
# As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
sed -i -- 's/10.4.1.1/192.168.10.1/g' ./bundles.yaml
# Choose the external port to go out from gateway to use.
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth1"/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
;;
'cengnlynxpod1' )
+ # Chose the hard drive(s) to use for CEPH OSD
+ sed -i -- 's|osd-devices: /srv|osd-devices: /dev/sdb|g' ./bundles.yaml
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth2.1202"/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 172.16.121.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1.1202"/g' ./bundles.yaml
;;
'juniperpod1' )
sed -i -- 's/10.4.1.1/172.16.50.1/g' ./bundles.yaml
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth1"/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
;;
+ 'ravellodemopod' )
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+ ;;
+ 'custom' )
+ sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
'default' )
sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
- sed -i -- 's/# ext-port: "eth1"/ ext-port: "eth1"/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
;;
esac
'ipv6' )
sed -i -- 's/#prefer-ipv6: true/prefer-ipv6: true/g' ./bundles.yaml
;;
+ 'dvr' )
+ sed -i -- 's/#enable-dvr: true/enable-dvr: true/g' ./bundles.yaml
+ sed -i -- 's/#l2-population: true/l2-population: true/g' ./bundles.yaml
+ ;;
+ 'sfc' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-sfc"/g' ./bundles.yaml
+ ;;
+ 'vpn' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-vpn"/g' ./bundles.yaml
+ ;;
+ 'odl_l3' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-l3"/g' ./bundles.yaml
+ ;;
esac
echo "... Deployment Started ...."
;;
esac
-case "$4" in
- 'onos' )
- echo "... onos prepare test ..."
- sleep 180s
- sh onos/juju_test_prepare.sh "$3"
- ;;
-esac
+#case "$4" in
+# 'onos' )
+# echo "... onos prepare test ..."
+# sleep 180s
+# sh onos/juju_test_prepare.sh "$3"
+# ;;
+#esac