added the change as per switch in intel pod5.

[joid.git] / ci / 01-deploybundle.sh

diff --git a/ci/01-deploybundle.sh b/ci/01-deploybundle.sh
index 86f8fb6..695cae5 100755 (executable)
--- a/ci/01-deploybundle.sh
+++ b/ci/01-deploybundle.sh
@@ -30,19 +30,23 @@ case "$3" in
          ;;
      'intelpod6' )
         # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
-         sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+         sed -i -- 's/10.4.1.1/10.6.1.2/g' ./bundles.yaml
         # choose the correct interface to use for data network
-         sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+         sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.6.12.0\/24/g' ./bundles.yaml
         # Choose the external port to go out from gateway to use.
-         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+        # Provide the gateway MAC to route the traffic externally.
+         sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
          ;;
      'intelpod5' )
         # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
-         sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+         sed -i -- 's/10.4.1.1/10.5.1.2/g' ./bundles.yaml
         # choose the correct interface to use for data network
-         sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+         sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.5.12.0\/24/g' ./bundles.yaml
         # Choose the external port to go out from gateway to use.
-         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2.724"/g' ./bundles.yaml
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+        # Provide the gateway MAC to route the traffic externally.
+         sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
         ;;
      'attvirpod1' )
         # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
@@ -51,8 +55,14 @@ case "$3" in
          sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
         ;;
      'cengnlynxpod1' )
+        # Chose the hard drive(s) to use for CEPH OSD
+         sed -i -- 's|osd-devices: /srv|osd-devices: /dev/sdb|g' ./bundles.yaml
+        # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
          sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
-         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2.1202"/g' ./bundles.yaml
+        # choose the correct interface to use for data network
+         sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 172.16.121.0\/24/g' ./bundles.yaml
+        # Choose the external port to go out from gateway to use.
+         sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1.1202"/g' ./bundles.yaml
         ;;
      'juniperpod1' )
          sed -i -- 's/10.4.1.1/172.16.50.1/g' ./bundles.yaml