case "$1" in
'nonha' )
- cp odl/juju-deployer/ovs-odl.yaml ./bundles.yaml
+ cp $4/juju-deployer/ovs-$4-nonha.yaml ./bundles.yaml
;;
'ha' )
- cp odl/juju-deployer/ovs-odl-ha.yaml ./bundles.yaml
- juju-deployer -d -r 13 -c bundles.yaml openstack-phase1
+ cp $4/juju-deployer/ovs-$4-ha.yaml ./bundles.yaml
;;
'tip' )
- cp odl/juju-deployer/ovs-odl-tip.yaml ./bundles.yaml
+ cp $4/juju-deployer/ovs-$4-tip.yaml ./bundles.yaml
+ cp common/source/* ./
+ sed -i -- "s|branch: master|branch: stable/$2|g" ./*.yaml
;;
* )
- cp odl/juju-deployer/ovs-odl.yaml ./bundles.yaml
+ cp $4/juju-deployer/ovs-$4-nonha.yaml ./bundles.yaml
;;
esac
-echo "... Deployment Started ...."
+case "$3" in
+ 'orangepod2' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.2.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 192.168.12.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'intelpod6' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.6.1.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.6.12.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+ # Provide the gateway MAC to route the traffic externally.
+ sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
+ ;;
+ 'intelpod5' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.5.1.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.5.12.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+ # Provide the gateway MAC to route the traffic externally.
+ sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
+ ;;
+ 'attvirpod1' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.10.1/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'cengnlynxpod1' )
+ # Chose the hard drive(s) to use for CEPH OSD
+ sed -i -- 's|osd-devices: /srv|osd-devices: /dev/sdb|g' ./bundles.yaml
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 172.16.121.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1.1202"/g' ./bundles.yaml
+ ;;
+ 'juniperpod1' )
+ sed -i -- 's/10.4.1.1/172.16.50.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'ravellodemopod' )
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+ ;;
+ 'custom' )
+ sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'default' )
+ sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+esac
+
+case "$5" in
+ 'ipv6' )
+ sed -i -- 's/#prefer-ipv6: true/prefer-ipv6: true/g' ./bundles.yaml
+ ;;
+ 'dvr' )
+ sed -i -- 's/#enable-dvr: true/enable-dvr: true/g' ./bundles.yaml
+ sed -i -- 's/#l2-population: true/l2-population: true/g' ./bundles.yaml
+ ;;
+ 'sfc' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-sfc"/g' ./bundles.yaml
+ ;;
+ 'vpn' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-vpn"/g' ./bundles.yaml
+ ;;
+ 'odl_l3' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-l3"/g' ./bundles.yaml
+ ;;
+esac
-#case openstack kilo with odl
-juju-deployer -d -r 13 -c bundles.yaml trusty-"$2"
+echo "... Deployment Started ...."
+case "$1" in
+ 'nonha' )
+ juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
+ ;;
+ 'ha' )
+ juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
+ ;;
+ 'tip' )
+ juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
+ ;;
+ * )
+ juju-deployer -vW -d -t 3600 -c bundles.yaml trusty-"$2"-nodes
+ juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml trusty-"$2"
+ ;;
+esac
-echo "... Deployment finished ...."
+#case "$4" in
+# 'onos' )
+# echo "... onos prepare test ..."
+# sleep 180s
+# sh onos/juju_test_prepare.sh "$3"
+# ;;
+#esac