#!/usr/bin/env bash
##
-## Copyright (c) 2010-2019 Intel Corporation
+## Copyright (c) 2010-2020 Intel Corporation
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
# Directory for package build
BUILD_DIR="/opt/rapid"
-# Directory where the packer tool has copied some files (e.g. check_prox_system_setup.sh)
-# Runtime scripts are assuming ${WORK_DIR} as the directory for PROX. Check the rundir variable in runrapid.py. Should be the same!
-# This variable is defined in 4 different places and should have the same value: centos.json, deploycentostools.sh, check_prox_system_setup.sh and runrapid.py
-WORK_DIR="/home/centos"
-DPDK_VERSION="19.05"
-PROX_COMMIT="b71a4cfd"
+DPDK_VERSION="20.05"
+PROX_COMMIT="80dfeb5c734cc4d681f467e853a541a8a91fe1cf"
PROX_CHECKOUT="git checkout ${PROX_COMMIT}"
## Next line is overruling the PROX_COMMIT and will replace the version with a very specific patch. Should be commented out
-## if you want to use a committed version of PROX
-##PROX_CHECKOUT="git fetch \"https://gerrit.opnfv.org/gerrit/samplevnf\" refs/changes/75/69475/2 && git checkout FETCH_HEAD"
+## if you want to use a committed version of PROX with the COMMIT ID specified above
+## As an example: Following line has the commit for testing IMIX, IPV6, ... It is the merge of all PROX commits on May 27th 2020
+#PROX_CHECKOUT="git fetch \"https://gerrit.opnfv.org/gerrit/samplevnf\" refs/changes/23/70223/1 && git checkout FETCH_HEAD"
MULTI_BUFFER_LIB_VER="0.52"
export RTE_SDK="${BUILD_DIR}/dpdk-${DPDK_VERSION}"
export RTE_TARGET="x86_64-native-linuxapp-gcc"
${SUDO} yum install -y deltarpm yum-utils
# NASM repository for AESNI MB library
- ${SUDO} yum-config-manager --add-repo http://www.nasm.us/nasm.repo
+ #${SUDO} yum-config-manager --add-repo http://www.nasm.us/nasm.repo
[ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y
${SUDO} yum install -y git wget gcc unzip libpcap-devel ncurses-devel \
libedit-devel lua-devel kernel-devel iperf3 pciutils \
- numactl-devel vim tuna openssl-devel nasm wireshark \
- make
+ numactl-devel vim tuna openssl-devel wireshark \
+ make driverctl
+
+ ${SUDO} wget https://www.nasm.us/pub/nasm/releasebuilds/2.14.02/linux/nasm-2.14.02-0.fc27.x86_64.rpm
+ ${SUDO} rpm -ivh nasm-2.14.02-0.fc27.x86_64.rpm
}
function k8s_os_pkgs_runtime_install()
# huge pages to be used by DPDK
${SUDO} sh -c '(echo "vm.nr_hugepages = 1024") > /etc/sysctl.conf'
+ ${SUDO} sh -c '(echo "options vfio enable_unsafe_noiommu_mode=1") > /etc/modprobe.d/vfio.conf'
+ ${SUDO} sh -c '(echo "vfio") > /etc/modules-load.d/vfio.conf'
+ ${SUDO} sh -c '(echo "vfio-pci") > /etc/modules-load.d/vfio.conf'
# Enabling tuned with the realtime-virtual-guest profile
pushd ${BUILD_DIR} > /dev/null 2>&1
wget http://linuxsoft.cern.ch/cern/centos/7/rt/x86_64/Packages/tuned-profiles-realtime-2.8.0-5.el7_4.2.noarch.rpm
# isolated CPUs so we can start the realtime-virtual-guest profile. If we don't, that command will fail.
# When the VM will be instantiated, the check_kernel_params service will check for the real number of cores available to this VM
# and update the realtime-virtual-guest-variables.conf accordingly.
- echo "isolated_cores=1" | ${SUDO} tee -a /etc/tuned/realtime-virtual-guest-variables.conf
+ echo "isolated_cores=1-3" | ${SUDO} tee -a /etc/tuned/realtime-virtual-guest-variables.conf
${SUDO} tuned-adm profile realtime-virtual-guest
# Install the check_tuned_params service to make sure that the grub cmd line has the right cpus in isolcpu. The actual number of cpu's
# assigned to this VM depends on the flavor used. We don't know at this time what that will be.
- ${SUDO} chmod +x ${WORK_DIR}/check_prox_system_setup.sh
- ${SUDO} cp -r ${WORK_DIR}/check_prox_system_setup.sh /usr/local/libexec/
- ${SUDO} cp -r ${WORK_DIR}/check-prox-system-setup.service /etc/systemd/system/
+ ${SUDO} chmod +x ${BUILD_DIR}/check_prox_system_setup.sh
+ ${SUDO} mv ${BUILD_DIR}/check_prox_system_setup.sh /usr/local/libexec/
+ ${SUDO} mv ${BUILD_DIR}/check-prox-system-setup.service /etc/systemd/system/
${SUDO} systemctl daemon-reload
${SUDO} systemctl enable check-prox-system-setup.service
- # Following lines are added to fix the following issue: When the VM gets
- # instantiated, the rapid scripts will try to ssh into the VM to start
- # the testing. Once the script connects with ssh, it starts downloading
- # config files and then start prox, etc... The problem is that when the VM
- # boots, check_prox_system_setup.sh will check for some things and
- # potentially reboot, resulting in loosing the ssh connection again.
- # To fix this issue, the following lines are disabling ssh access for the
- # centos user. The script will not be able to connect to the VM till ssh
- # access is restored after a reboot. Restoring ssh is now done by
- # check-prox-system-setup.service
- printf "\nMatch User centos\n" | ${SUDO} tee -a /etc/ssh/sshd_config
- printf "%sPubkeyAuthentication no\n" " " | ${SUDO} tee -a /etc/ssh/sshd_config
- printf "%sPasswordAuthentication no\n" " " | ${SUDO} tee -a /etc/ssh/sshd_config
popd > /dev/null 2>&1
}
tar -xf ./dpdk-${DPDK_VERSION}.tar.xz
popd > /dev/null 2>&1
- ${SUDO} ln -s ${RTE_SDK} ${WORK_DIR}/dpdk
+ ${SUDO} ln -s ${RTE_SDK} ${BUILD_DIR}/dpdk
pushd ${RTE_SDK} > /dev/null 2>&1
make config T=${RTE_TARGET}
- # The next sed lines make sure that we can compile DPDK 17.11 with a relatively new OS. Using a newer DPDK (18.5) should also resolve this issue
- #${SUDO} sed -i '/CONFIG_RTE_LIBRTE_KNI=y/c\CONFIG_RTE_LIBRTE_KNI=n' ${RTE_SDK}/build/.config
- #${SUDO} sed -i '/CONFIG_RTE_LIBRTE_PMD_KNI=y/c\CONFIG_RTE_LIBRTE_PMD_KNI=n' ${RTE_SDK}/build/.config
- #${SUDO} sed -i '/CONFIG_RTE_KNI_KMOD=y/c\CONFIG_RTE_KNI_KMOD=n' ${RTE_SDK}/build/.config
- #${SUDO} sed -i '/CONFIG_RTE_KNI_PREEMPT_DEFAULT=y/c\CONFIG_RTE_KNI_PREEMPT_DEFAULT=n' ${RTE_SDK}/build/.config
+ # Starting from DPDK 20.05, the IGB_UIO driver is not compiled by default.
+ # Uncomment the sed command to enable the driver compilation
+ #${SUDO} sed -i 's/CONFIG_RTE_EAL_IGB_UIO=n/c\/CONFIG_RTE_EAL_IGB_UIO=y' ${RTE_SDK}/build/.config
# For Kubernetes environment we use host vfio module
if [ "${K8S_ENV}" == "y" ]; then
function prox_compile()
{
- # Compile PROX
- pushd ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX
- make -j`getconf _NPROCESSORS_ONLN`
- popd > /dev/null 2>&1
+ # Compile PROX
+ pushd ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX
+ make -j`getconf _NPROCESSORS_ONLN`
+ ${SUDO} cp ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX/build/app/prox ${BUILD_DIR}/prox
+ popd > /dev/null 2>&1
}
function prox_install()
{
- # Clone and compile PROX
- pushd ${BUILD_DIR} > /dev/null 2>&1
- git clone https://git.opnfv.org/samplevnf
- pushd ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX > /dev/null 2>&1
- ${PROX_CHECKOUT}
- popd > /dev/null 2>&1
- prox_compile
- ${SUDO} cp ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX/build/app/prox ${WORK_DIR}/prox
- popd > /dev/null 2>&1
+ # Clone PROX
+ pushd ${BUILD_DIR} > /dev/null 2>&1
+ git clone https://git.opnfv.org/samplevnf
+ bash -c "${PROX_CHECKOUT}"
+ echo "${PROX_CHECKOUT}" > ${BUILD_DIR}/commit_id
+ cp -R ./samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid ./src
+ popd > /dev/null 2>&1
+ prox_compile
+
+ # Clean build folder
+ rm -rf ${BUILD_DIR}/samplevnf
}
function port_info_build()
pushd ${BUILD_DIR}/port_info > /dev/null 2>&1
make
- ${SUDO} cp ${BUILD_DIR}/port_info/build/app/port_info ${WORK_DIR}/port_info
+ ${SUDO} cp ${BUILD_DIR}/port_info/build/app/port_info_app ${BUILD_DIR}/port_info_app
popd > /dev/null 2>&1
}
function create_minimal_install()
{
- ldd ${WORK_DIR}/prox | awk '{ if ($(NF-1) != "=>") print $(NF-1) }' >> ${BUILD_DIR}/list_of_install_components
+ ldd ${BUILD_DIR}/prox | awk '{ if ($(NF-1) != "=>") print $(NF-1) }' >> ${BUILD_DIR}/list_of_install_components
- echo "${WORK_DIR}/prox" >> ${BUILD_DIR}/list_of_install_components
- echo "${WORK_DIR}/port_info" >> ${BUILD_DIR}/list_of_install_components
+ echo "${BUILD_DIR}/prox" >> ${BUILD_DIR}/list_of_install_components
+ echo "${BUILD_DIR}/port_info_app" >> ${BUILD_DIR}/list_of_install_components
+ echo "${BUILD_DIR}/commit_id" >> ${BUILD_DIR}/list_of_install_components
tar -czvhf ${BUILD_DIR}/install_components.tgz -T ${BUILD_DIR}/list_of_install_components
}
ldconfig
- #rm -rf ${BUILD_DIR}/install_components.tgz
+ rm -rf ${BUILD_DIR}/install_components.tgz
}
function print_usage()
Code Review / samplevnf.git / blobdiff