+18. Enable PXE booting
+
+ - For every controller- and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu, and hard disk as the second boot device in the same menu.
+
+19. Reboot all the controller- and compute blades.
+
+20. Wait for the availability of nodes showing up in the Fuel GUI.
+
+ - Wait until all nodes are displayed in top right corner of the Fuel GUI: <total number of server> TOTAL NODES and <total number of servers> UNALLOCATED NODES.
+
+21. Open the environment you previously created.
+
+22. Open the networks tab.
+
+23. Update the public network configuration.
+
+ Change the following fields to appropriate values:
+
+ - IP Range Start to <Public IP Address start>
+
+ - IP Range End to <Public IP Address end>
+
+ - CIDR to <CIDR for Public IP Addresses>
+
+ - Gateway to <Gateway for Public IP Addresses>
+
+ - Check VLAN tagging.
+
+ - Set appropriate VLAN id.
+
+24. Update the management network configuration.
+
+ - Set CIDR to 172.16.255.128/25 (or as per your which).
+
+ - Check VLAN tagging.
+
+ - Set appropriate VLAN id.
+
+25. Update the Neutron L2 configuration.
+
+ - Set VLAN ID range.
+
+26. Update the Neutron L3 configuration.
+
+ - Set Internal network CIDR to an appropriate value
+
+ - Set Internal network gateway to an appropriate value
+
+ - Set Floating IP ranges.
+
+ - Set DNS Servers
+
+27. Save Settings.
+
+28. Click "verify network" to check the network set-up consistency and connectivity
+
+29. Update the storage configuration.
+
+30. Open the nodes tab.
+
+31. Assign roles.
+
+ - Check <Controller and Telemetry MongoDB>.
+
+ - Check the three servers you want to be installed as Controllesr in pane <Assign Role>.
+
+ - Click <Apply Changes>.
+
+ - Check <Compute>.
+
+ - Check nodes to be installed as Compute nodes in pane Assign Role.
+
+ - Click <Apply Changes>.
+
+32. Configure interfaces.
+
+ - Check Select <All> to select all nodes with Control, Telemetry . MongoDB and Compute node roles.
+
+ - Click <Configure Interfaces>
+
+ - Screen Configure interfaces on number of <number of nodes> nodes is shown.
+ - Assign interfaces (bonded) for mgmt-, admin-, private-, public- and storage networks
+