+ if [ $no_parse ]; then
+ echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
+
+ else
+
+ echo "${blue}Gathering network parameters for Target System...this may take a few minutes${reset}"
+ ##Edit the ksgen settings appropriately
+ ##ksgen settings will be stored in /vagrant on the vagrant machine
+ ##if single node deployment all the variables will have the same ip
+ ##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
+
+ sed -i 's/^.*default_gw:.*$/default_gw:'" $node_default_gw"'/' opnfv_ksgen_settings.yml
+
+ ##replace private interface parameter
+ ##private interface will be of hosts, so we need to know the provisioned host interface name
+ ##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
+ ##replace IP for parameters with next IP that will be given to controller
+
+ if [[ "$deployment_type" == "single_network" || "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
+
+ if [ "$deployment_type" == "three_network" ]; then
+ sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
+ elif [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*network_type:.*$/network_type: single_network/' opnfv_ksgen_settings.yml
+ next_single_ip=${interface_ip_arr[0]}
+ foreman_ip=$next_single_ip
+ next_single_ip=$(next_usable_ip $next_single_ip)
+ fi
+
+ sed -i 's/^.*deployment_type:.*$/ deployment_type: '"$deployment_type"'/' opnfv_ksgen_settings.yml
+
+ ##get ip addresses for private network on controllers to make dhcp entries
+ ##required for controllers_ip_array global param
+ if [ "$deployment_type" == "single_network" ]; then
+ next_private_ip=$next_single_ip
+ sed -i 's/^.*no_dhcp:.*$/no_dhcp: true/' opnfv_ksgen_settings.yml
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ nodes=${controller_nodes}${compute_nodes}
+ next_admin_ip=${interface_ip_arr[0]}
+ type1=_admin
+ type2=_private
+ control_count=0
+ for node in ${controller_nodes}; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ echo "${red} Unable to find an unused IP for $node ! ${reset}"
+ exit 1
+ else
+ sed -i 's/'"$node$type1"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ sed -i 's/'"$node$type2"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ controller_ip_array=$controller_ip_array$next_private_ip,
+ controllers_ip_arr[$control_count]=$next_private_ip
+ ((control_count++))
+ fi
+ done
+
+ for node in ${compute_nodes}; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ echo "${red} Unable to find an unused IP for $node ! ${reset}"
+ exit 1
+ else
+ sed -i 's/'"$node$type1"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ fi
+ done
+
+ else
+ next_private_ip=${interface_ip_arr[1]}
+
+ type=_private
+ control_count=0
+ for node in controller1 controller2 controller3; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
+ exit 1
+ fi
+ sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ controller_ip_array=$controller_ip_array$next_private_ip,
+ controllers_ip_arr[$control_count]=$next_private_ip
+ ((control_count++))
+ done
+ fi
+
+ if [[ "$deployment_type" != "single_network" ]]; then
+ next_public_ip=${interface_ip_arr[2]}
+ foreman_ip=$next_public_ip
+ fi
+
+ ##if no dhcp, find all the Admin IPs for nodes in advance
+ if [ $virtual ]; then
+ if [ -z "$enable_virtual_dhcp" ]; then
+ sed -i 's/^.*no_dhcp:.*$/no_dhcp: true/' opnfv_ksgen_settings.yml
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ nodes=${controller_nodes}${compute_nodes}
+ next_admin_ip=${interface_ip_arr[0]}
+ type=_admin
+ for node in ${nodes}; do
+ next_admin_ip=$(next_ip $next_admin_ip)
+ if [ ! "$next_admin_ip" ]; then
+ echo "${red} Unable to find an unused IP in admin_network for $node ! ${reset}"
+ exit 1
+ else
+ admin_ip_arr[$node]=$next_admin_ip
+ sed -i 's/'"$node$type"'/'"$next_admin_ip"'/g' opnfv_ksgen_settings.yml
+ fi
+ done
+
+ ##allocate node public IPs
+ for node in ${nodes}; do
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ if [ ! "$next_public_ip" ]; then
+ echo "${red} Unable to find an unused IP in admin_network for $node ! ${reset}"
+ exit 1
+ else
+ public_ip_arr[$node]=$next_public_ip
+ fi
+ done
+ fi
+ fi
+ ##replace global param for controllers_ip_array
+ controller_ip_array=${controller_ip_array%?}
+ sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml
+
+ ##now replace all the VIP variables. admin//private can be the same IP
+ ##we have to use IP's here that won't be allocated to hosts at provisioning time
+ ##therefore we increment the ip by 10 to make sure we have a safe buffer
+ next_private_ip=$(increment_ip $next_private_ip 10)
+
+ private_output=$(grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml)
+ if [ ! -z "$private_output" ]; then
+ while read -r line; do
+ sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
+ exit 1
+ fi
+ done <<< "$private_output"
+ fi
+
+ ##replace odl_control_ip (non-HA only)
+ odl_control_ip=${controllers_ip_arr[0]}
+ sed -i 's/^.*odl_control_ip:.*$/ odl_control_ip: '"$odl_control_ip"'/' opnfv_ksgen_settings.yml
+
+ ##replace controller_ip (non-HA only)
+ sed -i 's/^.*controller_ip:.*$/ controller_ip: '"$odl_control_ip"'/' opnfv_ksgen_settings.yml
+
+ ##replace foreman site
+ sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$foreman_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
+ ##replace public vips
+
+ ##if single_network deployment we continue next_public_ip from next_private_ip
+ if [[ "$deployment_type" == "single_network" ]]; then
+ next_public_ip=$(next_usable_ip $next_private_ip)
+ else
+ ##no need to do this if no dhcp
+ if [[ -z "$enable_virtual_dhcp" && ! -z "$virtual" ]]; then
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ else
+ next_public_ip=$(increment_ip $next_public_ip 10)
+ fi
+ fi
+
+ public_output=$(grep -E '*public_vip' opnfv_ksgen_settings.yml)
+ if [ ! -z "$public_output" ]; then
+ while read -r line; do
+ if echo $line | grep horizon_public_vip; then
+ horizon_public_vip=$next_public_ip
+ fi
+ sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ if [ ! "$next_public_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
+ exit 1
+ fi
+ done <<< "$public_output"
+ fi
+
+ ##replace admin_network param for bare metal deployments
+ if [[ -z "$virtual" && -z "$single_network" ]]; then
+ admin_subnet=$(find_subnet $admin_ip $admin_subnet_mask)
+ sed -i 's/^.*admin_network:.*$/ admin_network:'" $admin_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ sed -i 's/^.*admin_network:.*$/ admin_network:'" \"false\""'/' opnfv_ksgen_settings.yml
+ fi
+ ##replace public_network param
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ sed -i 's/^.*public_network:.*$/ public_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*private_network:.*$/ private_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ ##replace private_network param
+ private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
+ sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ fi
+
+ ##replace storage_network
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*storage_network:.*$/ storage_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ elif [ "$deployment_type" == "three_network" ]; then
+ sed -i 's/^.*storage_network:.*$/ storage_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ next_storage_ip=${interface_ip_arr[3]}
+ storage_subnet=$(find_subnet $next_storage_ip $storage_subnet_mask)
+ sed -i 's/^.*storage_network:.*$/ storage_network:'" $storage_subnet"'/' opnfv_ksgen_settings.yml
+ fi
+
+ ##replace public_subnet param
+ public_subnet=$public_subnet'\'$public_short_subnet_mask
+ sed -i 's/^.*public_subnet:.*$/ public_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ ##replace private_subnet param
+ private_subnet=$private_subnet'\'$private_short_subnet_mask
+ sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ fi
+
+ ##replace public_dns param to be foreman server
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[0]}'/' opnfv_ksgen_settings.yml
+ else
+ sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
+ fi
+
+ ##replace public_gateway
+ if [ -z "$public_gateway" ]; then
+ if [ "$deployment_type" == "single_network" ]; then
+ public_gateway=$node_default_gw
+ else
+ ##if unset then we assume its the first IP in the public subnet
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ public_gateway=$(increment_subnet $public_subnet 1)
+ fi
+ fi
+ sed -i 's/^.*public_gateway:.*$/ public_gateway:'" $public_gateway"'/' opnfv_ksgen_settings.yml
+
+ ##we have to define an allocation range of the public subnet to give
+ ##to neutron to use as floating IPs
+ ##if static ip range, then we take the difference of the end range and current ip
+ ## to be the allocation pool
+ ##if not static ip, we will use the last 20 IP from the subnet
+ ## note that this is not a really good idea because the subnet must be at least a /27 for this to work...
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ if [ ! -z "$static_ip_range" ]; then
+ begin_octet=$(echo $next_public_ip | cut -d . -f4)
+ end_octet=$(echo $static_ip_range_end | cut -d . -f4)
+ ip_diff=$((end_octet-begin_octet))
+ if [ $ip_diff -le 0 ]; then
+ echo "${red}ip range left for floating range is less than or equal to 0! $ipdiff ${reset}"
+ exit 1
+ else
+ public_allocation_start=$(next_ip $next_public_ip)
+ public_allocation_end=$static_ip_range_end
+ fi
+ else
+ last_ip_subnet=$(find_last_ip_subnet $next_public_ip $public_subnet_mask)
+ public_allocation_start=$(subtract_ip $last_ip_subnet $floating_ip_count )
+ public_allocation_end=${last_ip_subnet}
+ fi
+ echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}"
+
+ sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
+ sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
+
+ else
+ printf '%s\n' 'deploy.sh: Unknown network type: $deployment_type' >&2
+ exit 1
+ fi
+
+ echo "${blue}Parameters Complete. Settings have been set for Foreman. ${reset}"