- cp maas/orange/pod2/control-interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
- cp maas/orange/pod2/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
- cp maas/orange/pod2/compute-interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
- cp maas/orange/pod2/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
- sed -i -- 's/10.4.1.1/192.168.2.2/g' ./bundles.yaml
- sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 192.168.12.0\/24/g' ./bundles.yaml
- ;;
- 'intelpod6' )
- cp maas/intel/pod6/interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
- cp maas/intel/pod6/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
- cp maas/intel/pod6/interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
- cp maas/intel/pod6/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
- sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
- sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
- ;;
- 'intelpod5' )
- cp maas/intel/pod5/interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
- cp maas/intel/pod5/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
- cp maas/intel/pod5/interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
- cp maas/intel/pod5/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
- sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
- sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.2.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 192.168.12.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'intelpod6' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.6.1.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.6.12.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth5"/g' ./bundles.yaml
+ # Provide the gateway MAC to route the traffic externally.
+ sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
+ ;;
+ 'intelpod5' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2.724"/g' ./bundles.yaml
+ # Provide the gateway MAC to route the traffic externally.
+ sed -i -- 's/#gateway-mac: "default"/gateway-mac: "default"/g' ./bundles.yaml
+ ;;
+ 'attvirpod1' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.10.1/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'cengnlynxpod1' )
+ # Chose the hard drive(s) to use for CEPH OSD
+ sed -i -- 's|osd-devices: /srv|osd-devices: /dev/sdb|g' ./bundles.yaml
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 172.16.121.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1.1202"/g' ./bundles.yaml
+ ;;
+ 'juniperpod1' )
+ sed -i -- 's/10.4.1.1/172.16.50.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'ravellodemopod' )
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+ ;;
+ 'custom' )
+ sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'default' )
+ sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+esac
+
+case "$5" in
+ 'ipv6' )
+ sed -i -- 's/#prefer-ipv6: true/prefer-ipv6: true/g' ./bundles.yaml
+ ;;
+ 'dvr' )
+ sed -i -- 's/#enable-dvr: true/enable-dvr: true/g' ./bundles.yaml
+ sed -i -- 's/#l2-population: true/l2-population: true/g' ./bundles.yaml
+ ;;
+ 'sfc' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-sfc"/g' ./bundles.yaml
+ ;;
+ 'vpn' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-vpn"/g' ./bundles.yaml
+ ;;
+ 'odl_l3' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-Be-l3"/g' ./bundles.yaml