+#read the value from deployment.yaml
+if [ -e ~/.juju/deployment.yaml ]; then
+
+ cp ~/.juju/deployment.yaml ./deployment.yaml
+
+ if [ -e ~/.juju/deployment.yaml ]; then
+ cp ~/.juju/deployconfig.yaml ./deployconfig.yaml
+
+ extport=`grep "ext-port" deployconfig.yaml | cut -d ' ' -f 4 | sed -e 's/ //' | tr ',' ' '`
+ sed --i "s@#ext-port: \"eth1\"@ext-port: \"$extport\"@g" ./bundles.yaml
+
+ datanet=`grep "dataNetwork" deployconfig.yaml | cut -d ' ' -f 4 | sed -e 's/ //'`
+ sed --i "s@#os-data-network: 10.4.8.0/21@os-data-network: $datanet@g" ./bundles.yaml
+
+ admnet=`grep "admNetwork" deployconfig.yaml | cut -d ' ' -f 4 | sed -e 's/ //'`
+ sed --i "s@10.4.1.1@$admnet@g" ./bundles.yaml
+
+ cephdisk=`grep "disk" deployconfig.yaml | cut -d ':' -f 2 | sed -e 's/ //'`
+ sed --i "s@osd-devices: /srv@osd-devices: $cephdisk@g" ./bundles.yaml
+ fi
+fi
+
+case "$3" in
+ 'attvirpod1' )
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/192.168.10.1/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'cengnlynxpod1' )
+ # Chose the hard drive(s) to use for CEPH OSD
+ sed -i -- 's|osd-devices: /srv|osd-devices: /dev/sdb|g' ./bundles.yaml
+ # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
+ sed -i -- 's/10.4.1.1/10.120.0.1/g' ./bundles.yaml
+ # choose the correct interface to use for data network
+ sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 172.16.121.0\/24/g' ./bundles.yaml
+ # Choose the external port to go out from gateway to use.
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1.1202"/g' ./bundles.yaml
+ ;;
+ 'juniperpod1' )
+ sed -i -- 's/10.4.1.1/172.16.50.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+ 'ravellodemopod' )
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth2"/g' ./bundles.yaml
+ ;;
+ 'default' )
+ sed -i -- 's/10.4.1.1/192.168.122.1/g' ./bundles.yaml
+ sed -i -- 's/#ext-port: "eth1"/ext-port: "eth1"/g' ./bundles.yaml
+ ;;
+esac
+
+# lets put the if seperateor as "," as this will save me from world.
+IFS=","
+
+for feature in $5; do
+ case "$feature" in
+ 'ipv6' )
+ sed -i -- 's/#prefer-ipv6: true/prefer-ipv6: true/g' ./bundles.yaml
+ ;;
+ 'dvr' )
+ sed -i -- 's/#enable-dvr: true/enable-dvr: true/g' ./bundles.yaml
+ sed -i -- 's/#l2-population: true/l2-population: true/g' ./bundles.yaml
+ ;;
+ 'sfc' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-beryllium-sfc"/g' ./bundles.yaml
+ ;;
+ 'vpn' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-beryllium-vpn"/g' ./bundles.yaml
+ ;;
+ 'odl_l3' )
+ sed -i -- 's/profile: "openvswitch-odl-Be"/profile: "openvswitch-odl-beryllium-l3"/g' ./bundles.yaml
+ ;;
+ 'dpdk' )
+ sed -i -- 's/#enable-dpdk: true/enable-dpdk: true/g' ./bundles.yaml
+ sed -i -- 's/#hugepages: "50%"/hugepages: "50%"/g' ./bundles.yaml
+ ;;
+ 'lxd' )
+ sed -i -- 's/#- - nova-compute:lxd/- - nova-compute:lxd/g' ./bundles.yaml
+ sed -i -- 's/#- lxd:lxd/- lxd:lxd/g' ./bundles.yaml
+ sed -i -- 's/#virt-type: lxd/virt-type: lxd/g' ./bundles.yaml
+ # adding the lxd subordinate charm
+ echo " lxd:" >> ./bundles.yaml
+ echo " charm: local:xenial/lxd" >> ./bundles.yaml
+ ;;
+ esac
+done
+
+#changing the target to the openstack release we want to deploy.
+sed -i -- "s|mitaka|$2|g" ./bundles.yaml
+
+#update source if trusty is target distribution
+case "$6" in
+ 'trusty' )
+ sed -i -- "s|#source|source|g" ./bundles.yaml
+ ;;
+ 'xenial' )
+ #changing the target to the ubuntu distro we want to deploy.
+ sed -i -- "s|trusty|$6|g" ./bundles.yaml
+ ;;
+esac
+
+echo "... Deployment Started ...."
+ juju-deployer -vW -d -t 3600 -c bundles.yaml $6-"$2"-nodes
+ juju-deployer -vW -d -t 7200 -r 5 -c bundles.yaml $6-"$2"