/* * Analog Devices bfin_spi3 controller driver * * Copyright (c) 2011 Analog Devices Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _SPI_CHANNEL_H_ #define _SPI_CHANNEL_H_ #include /* SPI_CONTROL */ #define SPI_CTL_EN 0x00000001 /* Enable */ #define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ #define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ #define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ #define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ #define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ #define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ #define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in transfers */ #define SPI_CTL_EMISO 0x00000100 /*Enable MISO */ #define SPI_CTL_SIZE 0x00000600 /*Word Transfer Size */ #define SPI_CTL_SIZE08 0x00000000 /*SIZE: 8 bits */ #define SPI_CTL_SIZE16 0x00000200 /*SIZE: 16 bits */ #define SPI_CTL_SIZE32 0x00000400 /*SIZE: 32 bits */ #define SPI_CTL_LSBF 0x00001000 /*LSB First */ #define SPI_CTL_FCEN 0x00002000 /*Flow-Control Enable */ #define SPI_CTL_FCCH 0x00004000 /*Flow-Control Channel Selection */ #define SPI_CTL_FCPL 0x00008000 /*Flow-Control Polarity */ #define SPI_CTL_FCWM 0x00030000 /*Flow-Control Water-Mark */ #define SPI_CTL_FIFO0 0x00000000 /*FCWM: Tx empty or Rx Full */ #define SPI_CTL_FIFO1 0x00010000 /*FCWM: Tx empty or Rx full (>=75%) */ #define SPI_CTL_FIFO2 0x00020000 /*FCWM: Tx empty or Rx full (>=50%) */ #define SPI_CTL_FMODE 0x00040000 /*Fast-mode Enable */ #define SPI_CTL_MIOM 0x00300000 /*Multiple I/O Mode */ #define SPI_CTL_MIO_DIS 0x00000000 /*MIOM: Disable */ #define SPI_CTL_MIO_DUAL 0x00100000 /*MIOM: Enable DIOM (Dual I/O Mode) */ #define SPI_CTL_MIO_QUAD 0x00200000 /*MIOM: Enable QUAD (Quad SPI Mode) */ #define SPI_CTL_SOSI 0x00400000 /*Start on MOSI */ /* SPI_RX_CONTROL */ #define SPI_RXCTL_REN 0x00000001 /*Receive Channel Enable */ #define SPI_RXCTL_RTI 0x00000004 /*Receive Transfer Initiate */ #define SPI_RXCTL_RWCEN 0x00000008 /*Receive Word Counter Enable */ #define SPI_RXCTL_RDR 0x00000070 /*Receive Data Request */ #define SPI_RXCTL_RDR_DIS 0x00000000 /*RDR: Disabled */ #define SPI_RXCTL_RDR_NE 0x00000010 /*RDR: RFIFO not empty */ #define SPI_RXCTL_RDR_25 0x00000020 /*RDR: RFIFO 25% full */ #define SPI_RXCTL_RDR_50 0x00000030 /*RDR: RFIFO 50% full */ #define SPI_RXCTL_RDR_75 0x00000040 /*RDR: RFIFO 75% full */ #define SPI_RXCTL_RDR_FULL 0x00000050 /*RDR: RFIFO full */ #define SPI_RXCTL_RDO 0x00000100 /*Receive Data Over-Run */ #define SPI_RXCTL_RRWM 0x00003000 /*FIFO Regular Water-Mark */ #define SPI_RXCTL_RWM_0 0x00000000 /*RRWM: RFIFO Empty */ #define SPI_RXCTL_RWM_25 0x00001000 /*RRWM: RFIFO 25% full */ #define SPI_RXCTL_RWM_50 0x00002000 /*RRWM: RFIFO 50% full */ #define SPI_RXCTL_RWM_75 0x00003000 /*RRWM: RFIFO 75% full */ #define SPI_RXCTL_RUWM 0x00070000 /*FIFO Urgent Water-Mark */ #define SPI_RXCTL_UWM_DIS 0x00000000 /*RUWM: Disabled */ #define SPI_RXCTL_UWM_25 0x00010000 /*RUWM: RFIFO 25% full */ #define SPI_RXCTL_UWM_50 0x00020000 /*RUWM: RFIFO 50% full */ #define SPI_RXCTL_UWM_75 0x00030000 /*RUWM: RFIFO 75% full */ #define SPI_RXCTL_UWM_FULL 0x00040000 /*RUWM: RFIFO full */ /* SPI_TX_CONTROL */ #define SPI_TXCTL_TEN 0x00000001 /*Transmit Channel Enable */ #define SPI_TXCTL_TTI 0x00000004 /*Transmit Transfer Initiate */ #define SPI_TXCTL_TWCEN 0x00000008 /*Transmit Word Counter Enable */ #define SPI_TXCTL_TDR 0x00000070 /*Transmit Data Request */ #define SPI_TXCTL_TDR_DIS 0x00000000 /*TDR: Disabled */ #define SPI_TXCTL_TDR_NF 0x00000010 /*TDR: TFIFO not full */ #define SPI_TXCTL_TDR_25 0x00000020 /*TDR: TFIFO 25% empty */ #define SPI_TXCTL_TDR_50 0x00000030 /*TDR: TFIFO 50% empty */ #define SPI_TXCTL_TDR_75 0x00000040 /*TDR: TFIFO 75% empty */ #define SPI_TXCTL_TDR_EMPTY 0x00000050 /*TDR: TFIFO empty */ #define SPI_TXCTL_TDU 0x00000100 /*Transmit Data Under-Run */ #define SPI_TXCTL_TRWM 0x00003000 /*FIFO Regular Water-Mark */ #define SPI_TXCTL_RWM_FULL 0x00000000 /*TRWM: TFIFO full */ #define SPI_TXCTL_RWM_25 0x00001000 /*TRWM: TFIFO 25% empty */ #define SPI_TXCTL_RWM_50 0x00002000 /*TRWM: TFIFO 50% empty */ #define SPI_TXCTL_RWM_75 0x00003000 /*TRWM: TFIFO 75% empty */ #define SPI_TXCTL_TUWM 0x00070000 /*FIFO Urgent Water-Mark */ #define SPI_TXCTL_UWM_DIS 0x00000000 /*TUWM: Disabled */ #define SPI_TXCTL_UWM_25 0x00010000 /*TUWM: TFIFO 25% empty */ #define SPI_TXCTL_UWM_50 0x00020000 /*TUWM: TFIFO 50% empty */ #define SPI_TXCTL_UWM_75 0x00030000 /*TUWM: TFIFO 75% empty */ #define SPI_TXCTL_UWM_EMPTY 0x00040000 /*TUWM: TFIFO empty */ /* SPI_CLOCK */ #define SPI_CLK_BAUD 0x0000FFFF /*Baud Rate */ /* SPI_DELAY */ #define SPI_DLY_STOP 0x000000FF /*Transfer delay time */ #define SPI_DLY_LEADX 0x00000100 /*Extended (1 SCK) LEAD Control */ #define SPI_DLY_LAGX 0x00000200 /*Extended (1 SCK) LAG control */ /* SPI_SSEL */ #define SPI_SLVSEL_SSE1 0x00000002 /*SPISSEL1 Enable */ #define SPI_SLVSEL_SSE2 0x00000004 /*SPISSEL2 Enable */ #define SPI_SLVSEL_SSE3 0x00000008 /*SPISSEL3 Enable */ #define SPI_SLVSEL_SSE4 0x00000010 /*SPISSEL4 Enable */ #define SPI_SLVSEL_SSE5 0x00000020 /*SPISSEL5 Enable */ #define SPI_SLVSEL_SSE6 0x00000040 /*SPISSEL6 Enable */ #define SPI_SLVSEL_SSE7 0x00000080 /*SPISSEL7 Enable */ #define SPI_SLVSEL_SSEL1 0x00000200 /*SPISSEL1 Value */ #define SPI_SLVSEL_SSEL2 0x00000400 /*SPISSEL2 Value */ #define SPI_SLVSEL_SSEL3 0x00000800 /*SPISSEL3 Value */ #define SPI_SLVSEL_SSEL4 0x00001000 /*SPISSEL4 Value */ #define SPI_SLVSEL_SSEL5 0x00002000 /*SPISSEL5 Value */ #define SPI_SLVSEL_SSEL6 0x00004000 /*SPISSEL6 Value */ #define SPI_SLVSEL_SSEL7 0x00008000 /*SPISSEL7 Value */ /* SPI_RWC */ #define SPI_RWC_VALUE 0x0000FFFF /*Received Word-Count */ /* SPI_RWCR */ #define SPI_RWCR_VALUE 0x0000FFFF /*Received Word-Count Reload */ /* SPI_TWC */ #define SPI_TWC_VALUE 0x0000FFFF /*Transmitted Word-Count */ /* SPI_TWCR */ #define SPI_TWCR_VALUE 0x0000FFFF /*Transmitted Word-Count Reload */ /* SPI_IMASK */ #define SPI_IMSK_RUWM 0x00000002 /*Receive Water-Mark Interrupt Mask */ #define SPI_IMSK_TUWM 0x00000004 /*Transmit Water-Mark Interrupt Mask */ #define SPI_IMSK_ROM 0x00000010 /*Receive Over-Run Interrupt Mask */ #define SPI_IMSK_TUM 0x00000020 /*Transmit Under-Run Interrupt Mask */ #define SPI_IMSK_TCM 0x00000040 /*Transmit Collision Interrupt Mask */ #define SPI_IMSK_MFM 0x00000080 /*Mode Fault Interrupt Mask */ #define SPI_IMSK_RSM 0x00000100 /*Receive Start Interrupt Mask */ #define SPI_IMSK_TSM 0x00000200 /*Transmit Start Interrupt Mask */ #define SPI_IMSK_RFM 0x00000400 /*Receive Finish Interrupt Mask */ #define SPI_IMSK_TFM 0x00000800 /*Transmit Finish Interrupt Mask */ /* SPI_IMASKCL */ #define SPI_IMSK_CLR_RUW 0x00000002 /*Receive Water-Mark Interrupt Mask */ #define SPI_IMSK_CLR_TUWM 0x00000004 /*Transmit Water-Mark Interrupt Mask */ #define SPI_IMSK_CLR_ROM 0x00000010 /*Receive Over-Run Interrupt Mask */ #define SPI_IMSK_CLR_TUM 0x00000020 /*Transmit Under-Run Interrupt Mask */ #define SPI_IMSK_CLR_TCM 0x00000040 /*Transmit Collision Interrupt Mask */ #define SPI_IMSK_CLR_MFM 0x00000080 /*Mode Fault Interrupt Mask */ #define SPI_IMSK_CLR_RSM 0x00000100 /*Receive Start Interrupt Mask */ #define SPI_IMSK_CLR_TSM 0x00000200 /*Transmit Start Interrupt Mask */ #define SPI_IMSK_CLR_RFM 0x00000400 /*Receive Finish Interrupt Mask */ #define SPI_IMSK_CLR_TFM 0x00000800 /*Transmit Finish Interrupt Mask */ /* SPI_IMASKST */ #define SPI_IMSK_SET_RUWM 0x00000002 /*Receive Water-Mark Interrupt Mask */ #define SPI_IMSK_SET_TUWM 0x00000004 /*Transmit Water-Mark Interrupt Mask */ #define SPI_IMSK_SET_ROM 0x00000010 /*Receive Over-Run Interrupt Mask */ #define SPI_IMSK_SET_TUM 0x00000020 /*Transmit Under-Run Interrupt Mask */ #define SPI_IMSK_SET_TCM 0x00000040 /*Transmit Collision Interrupt Mask */ #define SPI_IMSK_SET_MFM 0x00000080 /*Mode Fault Interrupt Mask */ #define SPI_IMSK_SET_RSM 0x00000100 /*Receive Start Interrupt Mask */ #define SPI_IMSK_SET_TSM 0x00000200 /*Transmit Start Interrupt Mask */ #define SPI_IMSK_SET_RFM 0x00000400 /*Receive Finish Interrupt Mask */ #define SPI_IMSK_SET_TFM 0x00000800 /*Transmit Finish Interrupt Mask */ /* SPI_STATUS */ #define SPI_STAT_SPIF 0x00000001 /*SPI Finished */ #define SPI_STAT_RUWM 0x00000002 /*Receive Water-Mark Breached */ #define SPI_STAT_TUWM 0x00000004 /*Transmit Water-Mark Breached */ #define SPI_STAT_ROE 0x00000010 /*Receive Over-Run Indication */ #define SPI_STAT_TUE 0x00000020 /*Transmit Under-Run Indication */ #define SPI_STAT_TCE 0x00000040 /*Transmit Collision Indication */ #define SPI_STAT_MODF 0x00000080 /*Mode Fault Indication */ #define SPI_STAT_RS 0x00000100 /*Receive Start Indication */ #define SPI_STAT_TS 0x00000200 /*Transmit Start Indication */ #define SPI_STAT_RF 0x00000400 /*Receive Finish Indication */ #define SPI_STAT_TF 0x00000800 /*Transmit Finish Indication */ #define SPI_STAT_RFS 0x00007000 /*SPI_RFIFO status */ #define SPI_STAT_RFIFO_EMPTY 0x00000000 /*RFS: RFIFO Empty */ #define SPI_STAT_RFIFO_25 0x00001000 /*RFS: RFIFO 25% Full */ #define SPI_STAT_RFIFO_50 0x00002000 /*RFS: RFIFO 50% Full */ #define SPI_STAT_RFIFO_75 0x00003000 /*RFS: RFIFO 75% Full */ #define SPI_STAT_RFIFO_FULL 0x00004000 /*RFS: RFIFO Full */ #define SPI_STAT_TFS 0x00070000 /*SPI_TFIFO status */ #define SPI_STAT_TFIFO_FULL 0x00000000 /*TFS: TFIFO full */ #define SPI_STAT_TFIFO_25 0x00010000 /*TFS: TFIFO 25% empty */ #define SPI_STAT_TFIFO_50 0x00020000 /*TFS: TFIFO 50% empty */ #define SPI_STAT_TFIFO_75 0x00030000 /*TFS: TFIFO 75% empty */ #define SPI_STAT_TFIFO_EMPTY 0x00040000 /*TFS: TFIFO empty */ #define SPI_STAT_FCS 0x00100000 /*Flow-Control Stall Indication */ #define SPI_STAT_RFE 0x00400000 /*SPI_RFIFO Empty */ #define SPI_STAT_TFF 0x00800000 /*SPI_TFIFO Full */ /* SPI_ILAT */ #define SPI_ILAT_RUWMI 0x00000002 /*Receive Water Mark Interrupt */ #define SPI_ILAT_TUWMI 0x00000004 /*Transmit Water Mark Interrupt */ #define SPI_ILAT_ROI 0x00000010 /*Receive Over-Run Indication */ #define SPI_ILAT_TUI 0x00000020 /*Transmit Under-Run Indication */ #define SPI_ILAT_TCI 0x00000040 /*Transmit Collision Indication */ #define SPI_ILAT_MFI 0x00000080 /*Mode Fault Indication */ #define SPI_ILAT_RSI 0x00000100 /*Receive Start Indication */ #define SPI_ILAT_TSI 0x00000200 /*Transmit Start Indication */ #define SPI_ILAT_RFI 0x00000400 /*Receive Finish Indication */ #define SPI_ILAT_TFI 0x00000800 /*Transmit Finish Indication */ /* SPI_ILATCL */ #define SPI_ILAT_CLR_RUWMI 0x00000002 /*Receive Water Mark Interrupt */ #define SPI_ILAT_CLR_TUWMI 0x00000004 /*Transmit Water Mark Interrupt */ #define SPI_ILAT_CLR_ROI 0x00000010 /*Receive Over-Run Indication */ #define SPI_ILAT_CLR_TUI 0x00000020 /*Transmit Under-Run Indication */ #define SPI_ILAT_CLR_TCI 0x00000040 /*Transmit Collision Indication */ #define SPI_ILAT_CLR_MFI 0x00000080 /*Mode Fault Indication */ #define SPI_ILAT_CLR_RSI 0x00000100 /*Receive Start Indication */ #define SPI_ILAT_CLR_TSI 0x00000200 /*Transmit Start Indication */ #define SPI_ILAT_CLR_RFI 0x00000400 /*Receive Finish Indication */ #define SPI_ILAT_CLR_TFI 0x00000800 /*Transmit Finish Indication */ /* * bfin spi3 registers layout */ struct bfin_spi_regs { u32 revid; u32 control; u32 rx_control; u32 tx_control; u32 clock; u32 delay; u32 ssel; u32 rwc; u32 rwcr; u32 twc; u32 twcr; u32 reserved0; u32 emask; u32 emaskcl; u32 emaskst; u32 reserved1; u32 status; u32 elat; u32 elatcl; u32 reserved2; u32 rfifo; u32 reserved3; u32 tfifo; }; #endif /* _SPI_CHANNEL_H_ */