/* * bcm2708 aka bcm2835/2836 aka Raspberry Pi/Pi2 SoC platform defines * * These definitions are derived from those in Raspbian Linux at * arch/arm/mach-{bcm2708,bcm2709}/include/mach/platform.h * where they carry the following notice: * * Copyright (C) 2010 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define MCORE_OFFSET 0x0000 /* Fake frame buffer device * (the multicore sync block) */ #define IC0_OFFSET 0x2000 #define ST_OFFSET 0x3000 /* System Timer */ #define MPHI_OFFSET 0x6000 /* Message-based Parallel Host Intf. */ #define DMA_OFFSET 0x7000 /* DMA controller, channels 0-14 */ #define ARM_OFFSET 0xB000 /* BCM2708 ARM control block */ #define ARMCTRL_OFFSET (ARM_OFFSET + 0x000) #define ARMCTRL_IC_OFFSET (ARM_OFFSET + 0x200) /* Interrupt controller */ #define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */ #define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores * Doorbells & Mailboxes */ #define PM_OFFSET 0x100000 /* Power Management, Reset controller * and Watchdog registers */ #define PCM_CLOCK_OFFSET 0x101098 #define RNG_OFFSET 0x104000 #define GPIO_OFFSET 0x200000 #define UART0_OFFSET 0x201000 #define MMCI0_OFFSET 0x202000 #define I2S_OFFSET 0x203000 #define SPI0_OFFSET 0x204000 #define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */ #define UART1_OFFSET 0x215000 #define EMMC_OFFSET 0x300000 #define SMI_OFFSET 0x600000 #define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */ #define USB_OFFSET 0x980000 /* DTC_OTG USB controller */ #define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */ /* GPU interrupts */ #define INTERRUPT_TIMER0 0 #define INTERRUPT_TIMER1 1 #define INTERRUPT_TIMER2 2 #define INTERRUPT_TIMER3 3 #define INTERRUPT_CODEC0 4 #define INTERRUPT_CODEC1 5 #define INTERRUPT_CODEC2 6 #define INTERRUPT_JPEG 7 #define INTERRUPT_ISP 8 #define INTERRUPT_USB 9 #define INTERRUPT_3D 10 #define INTERRUPT_TRANSPOSER 11 #define INTERRUPT_MULTICORESYNC0 12 #define INTERRUPT_MULTICORESYNC1 13 #define INTERRUPT_MULTICORESYNC2 14 #define INTERRUPT_MULTICORESYNC3 15 #define INTERRUPT_DMA0 16 #define INTERRUPT_DMA1 17 #define INTERRUPT_DMA2 18 #define INTERRUPT_DMA3 19 #define INTERRUPT_DMA4 20 #define INTERRUPT_DMA5 21 #define INTERRUPT_DMA6 22 #define INTERRUPT_DMA7 23 #define INTERRUPT_DMA8 24 #define INTERRUPT_DMA9 25 #define INTERRUPT_DMA10 26 #define INTERRUPT_DMA11 27 #define INTERRUPT_DMA12 28 #define INTERRUPT_AUX 29 #define INTERRUPT_ARM 30 #define INTERRUPT_VPUDMA 31 #define INTERRUPT_HOSTPORT 32 #define INTERRUPT_VIDEOSCALER 33 #define INTERRUPT_CCP2TX 34 #define INTERRUPT_SDC 35 #define INTERRUPT_DSI0 36 #define INTERRUPT_AVE 37 #define INTERRUPT_CAM0 38 #define INTERRUPT_CAM1 39 #define INTERRUPT_HDMI0 40 #define INTERRUPT_HDMI1 41 #define INTERRUPT_PIXELVALVE1 42 #define INTERRUPT_I2CSPISLV 43 #define INTERRUPT_DSI1 44 #define INTERRUPT_PWA0 45 #define INTERRUPT_PWA1 46 #define INTERRUPT_CPR 47 #define INTERRUPT_SMI 48 #define INTERRUPT_GPIO0 49 #define INTERRUPT_GPIO1 50 #define INTERRUPT_GPIO2 51 #define INTERRUPT_GPIO3 52 #define INTERRUPT_I2C 53 #define INTERRUPT_SPI 54 #define INTERRUPT_I2SPCM 55 #define INTERRUPT_SDIO 56 #define INTERRUPT_UART 57 #define INTERRUPT_SLIMBUS 58 #define INTERRUPT_VEC 59 #define INTERRUPT_CPG 60 #define INTERRUPT_RNG 61 #define INTERRUPT_ARASANSDIO 62 #define INTERRUPT_AVSPMON 63 /* ARM CPU IRQs use a private number space */ #define INTERRUPT_ARM_TIMER 0 #define INTERRUPT_ARM_MAILBOX 1 #define INTERRUPT_ARM_DOORBELL_0 2 #define INTERRUPT_ARM_DOORBELL_1 3 #define INTERRUPT_VPU0_HALTED 4 #define INTERRUPT_VPU1_HALTED 5 #define INTERRUPT_ILLEGAL_TYPE0 6 #define INTERRUPT_ILLEGAL_TYPE1 7