############################################################################## # Copyright (c) 2015 Ericsson AB and others. # stefan.k.berg@ericsson.com # jonas.bjurel@ericsson.com # All rights reserved. This program and the accompanying materials # are made available under the terms of the Apache License, Version 2.0 # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## This README file describes how to install the OPNFV BGS Stack ============================================================= 1.1 Install Fuel Server ----------------------- 1. Mount the built .iso file (release/opnfv-.iso) as a bootdevice to the fuel server. 2. Reboot the fuel server. The system now boots from the ISO image. 3. Change the grub boot params When Press Tab to edit . is shown press Tab. Change showmenu=no to showmenu=yes. Change netmask=255.255.255.0 to netmask=255.255.0.0. Press Enter. 4 Wait until screen Fuel setup . is shown. Note: This takes about 30 minutes. 5. Select PXE Setup and change the following fields to appropriate values (example below): Static Pool Start 10.20.0.3 Static Pool End 10.20.0.254 DHCP Pool Start 10.20.128.3 DHCP Pool End 10.20.128.254 6. Select DNS & Hostname and change the following fields to appropriate values: Hostname -fuel Domain Search Domain Hostname to test DNS 7. Select Time Sync and change the following fields to appropriate values: NTP Server 1 NTP Server 2 NTP Server 3 Note: This step is only to pass the network test, the actual ntp parameters will be set with the pre_deply script. 8. Start the installation. Select Quit Setup and press Save and Quit. Installation starts, wait until a screen with logon credentials is shown. Note: This takes about 15 minutes. 10. Enable PXE Booting and put it first in the bios boot order menu. 11. Reboot the controller- and compute blades. 12. Connect to Fuel wit a browser towards port 8000 13. Create and name a new OpenStack environment, to be installed. 14. Select Icehouse on Ubuntu . in field OpenStack Release. 15. Select deployment mode. Select the Multi-node with HA. 16. Select compute node mode. Select KVM as hypervisor. 17. Select network mode. Select Neutron with VLAN segmentation. 18. Select Storage Backends. Select Ceph for Cinder and default for glance. 19. Select additional services. Check option Install Celiometer (OpenStack Telemetry). 20. Create the new environment. 21. Wait for availability nodes. Wait until all nodes are displayed in top right in TOTAL NODES and UNALLOCATED NODES. 22. Open the created environment. 23. Open the networks tab. 24. Update the public configuration. Change the following fields to appropriate values: IP Range Start to IP Range End to CIDR to Gateway to Check VLAN tagging. Set appropriate VLAN id. 25. Update the management configuration. Set CIDR to 172.16.255.128/25. Check VLAN tagging. Set appropriate VLAN id. 26. Update the storage configuration. Set CIDR to the appropriate value Check VLAN tagging. Set appropriate VLAN id. 27. Update the Neutron L2 configuration. Set VLAN ID range. 28. Update the Neutron L3 configuration. Set Internal network CIDR to an appropriate value Set Internal network gateway to an appropriate value Set Floating IP ranges. Set DNS Servers 29. Save Settings. 30. Click "verify network" to check the network set-up 31. Update storage configuration. 32. Open the nodes tab. 33. Assign roles. Check Controller and Telemetry . MongoDB. Check three nodes to be installed as Controller in pane Assign Role. Click Apply Changes. Check Compute. Check nodes to be installed as Compute nodes in pane Assign Role. Click Apply Changes. 34. Configure interfaces. Check Select All to select all nodes with Control, Telemetry . MongoDB and Compute node roles. Click Configure Interfaces. Screen Configure interfaces on number of nodes is shown. Assign interfaces (bonded) for mgmt-, admin-, private-, public- and storage networks 35. Run the pre-deploy script. Log on as root to the Fuel node. Print Fuel environment Id (fuel env) #> id | status | name | mode | release_id | changes | new | | ha_compact | 2 | 36. Run the pre-deployment script (/opt/opnfv/pre-deploy.sh ) As prompted for-, set the DNS servers to go into /etc/resolv.conf. As prompted for-, set any Hosts file additions for controllers and compute nodes. You will be prompted for name, FQDN and IP for each entry. Press return when prompted for a name when you have completed your input. As prompted for-, set NTP upstream configuration for controllers. You will be prompted for a NTP server each entry. Press return when prompted for a NTP server when you have completed your input. 37. Deploy the environment. In the Fuel GUI, click Deploy Changes. 38 Verify the OpenStack Environment Open the Health Check tab . Select Select All. Click Run tests.