Merge "Add support for VXLAN latency"
[nfvbench.git] / test / test_nfvbench.py
1 #!/usr/bin/env python
2 # Copyright 2016 Cisco Systems, Inc.  All rights reserved.
3 #
4 #    Licensed under the Apache License, Version 2.0 (the "License"); you may
5 #    not use this file except in compliance with the License. You may obtain
6 #    a copy of the License at
7 #
8 #         http://www.apache.org/licenses/LICENSE-2.0
9 #
10 #    Unless required by applicable law or agreed to in writing, software
11 #    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
12 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
13 #    License for the specific language governing permissions and limitations
14 #    under the License.
15 #
16 from mock_trex import no_op
17
18 import json
19 import logging
20 import sys
21
22 from attrdict import AttrDict
23 from mock import patch
24 import pytest
25
26 from nfvbench.config import config_loads
27 from nfvbench.credentials import Credentials
28 from nfvbench.fluentd import FluentLogHandler
29 import nfvbench.log
30 import nfvbench.nfvbench
31 from nfvbench.traffic_client import Device
32 from nfvbench.traffic_client import GeneratorConfig
33 from nfvbench.traffic_client import IpBlock
34 from nfvbench.traffic_client import TrafficClient
35 import nfvbench.traffic_gen.traffic_utils as traffic_utils
36
37
38 # just to get rid of the unused function warning
39 no_op()
40
41 def setup_module(module):
42     """Enable log."""
43     nfvbench.log.setup(mute_stdout=True)
44
45 # =========================================================================
46 # Traffic client tests
47 # =========================================================================
48
49 def test_parse_rate_str():
50     parse_rate_str = traffic_utils.parse_rate_str
51     try:
52         assert parse_rate_str('100%') == {'rate_percent': '100.0'}
53         assert parse_rate_str('37.5%') == {'rate_percent': '37.5'}
54         assert parse_rate_str('100%') == {'rate_percent': '100.0'}
55         assert parse_rate_str('60pps') == {'rate_pps': '60'}
56         assert parse_rate_str('60kpps') == {'rate_pps': '60000'}
57         assert parse_rate_str('6Mpps') == {'rate_pps': '6000000'}
58         assert parse_rate_str('6gpps') == {'rate_pps': '6000000000'}
59         assert parse_rate_str('80bps') == {'rate_bps': '80'}
60         assert parse_rate_str('80bps') == {'rate_bps': '80'}
61         assert parse_rate_str('80kbps') == {'rate_bps': '80000'}
62         assert parse_rate_str('80kBps') == {'rate_bps': '640000'}
63         assert parse_rate_str('80Mbps') == {'rate_bps': '80000000'}
64         assert parse_rate_str('80 MBps') == {'rate_bps': '640000000'}
65         assert parse_rate_str('80Gbps') == {'rate_bps': '80000000000'}
66     except Exception as exc:
67         assert False, exc.message
68
69     def should_raise_error(str):
70         try:
71             parse_rate_str(str)
72         except Exception:
73             return True
74         else:
75             return False
76         return False
77
78     assert should_raise_error('101')
79     assert should_raise_error('201%')
80     assert should_raise_error('10Kbps')
81     assert should_raise_error('0kbps')
82     assert should_raise_error('0pps')
83     assert should_raise_error('-1bps')
84
85
86 def test_rate_conversion():
87     assert traffic_utils.load_to_bps(50, 10000000000) == pytest.approx(5000000000.0)
88     assert traffic_utils.load_to_bps(37, 10000000000) == pytest.approx(3700000000.0)
89     assert traffic_utils.load_to_bps(100, 10000000000) == pytest.approx(10000000000.0)
90
91     assert traffic_utils.bps_to_load(5000000000.0, 10000000000) == pytest.approx(50.0)
92     assert traffic_utils.bps_to_load(3700000000.0, 10000000000) == pytest.approx(37.0)
93     assert traffic_utils.bps_to_load(10000000000.0, 10000000000) == pytest.approx(100.0)
94
95     assert traffic_utils.bps_to_pps(500000, 64) == pytest.approx(744.047619048)
96     assert traffic_utils.bps_to_pps(388888, 1518) == pytest.approx(31.6066319896)
97     assert traffic_utils.bps_to_pps(9298322222, 340.3) == pytest.approx(3225895.85831)
98
99     assert traffic_utils.pps_to_bps(744.047619048, 64) == pytest.approx(500000)
100     assert traffic_utils.pps_to_bps(31.6066319896, 1518) == pytest.approx(388888)
101     assert traffic_utils.pps_to_bps(3225895.85831, 340.3) == pytest.approx(9298322222)
102
103
104 # pps at 10Gbps line rate for 64 byte frames
105 LR_64B_PPS = 14880952
106 LR_1518B_PPS = 812743
107
108 def assert_equivalence(reference, value, allowance_pct=1):
109     """Assert if a value is equivalent to a reference value with given margin.
110
111     :param float reference: reference value to compare to
112     :param float value: value to compare to reference
113     :param float allowance_pct: max allowed percentage of margin
114         0 : requires exact match
115         1 : must be equal within 1% of the reference value
116         ...
117         100: always true
118     """
119     if reference == 0:
120         assert value == 0
121     else:
122         assert abs(value - reference) * 100 / reference <= allowance_pct
123
124 def test_load_from_rate():
125     assert traffic_utils.get_load_from_rate('100%') == 100
126     assert_equivalence(100, traffic_utils.get_load_from_rate(str(LR_64B_PPS) + 'pps'))
127     assert_equivalence(50, traffic_utils.get_load_from_rate(str(LR_64B_PPS / 2) + 'pps'))
128     assert_equivalence(100, traffic_utils.get_load_from_rate('10Gbps'))
129     assert_equivalence(50, traffic_utils.get_load_from_rate('5000Mbps'))
130     assert_equivalence(1, traffic_utils.get_load_from_rate('100Mbps'))
131     assert_equivalence(100, traffic_utils.get_load_from_rate(str(LR_1518B_PPS) + 'pps',
132                                                              avg_frame_size=1518))
133     assert_equivalence(100, traffic_utils.get_load_from_rate(str(LR_1518B_PPS * 2) + 'pps',
134                                                              avg_frame_size=1518,
135                                                              line_rate='20Gbps'))
136
137 # =========================================================================
138 # Other tests
139 # =========================================================================
140
141 def test_no_credentials():
142     cred = Credentials('/completely/wrong/path/openrc', None, False)
143     if cred.rc_auth_url:
144         # shouldn't get valid data unless user set environment variables
145         assert False
146     else:
147         assert True
148
149 def test_ip_block():
150     ipb = IpBlock('10.0.0.0', '0.0.0.1', 256)
151     assert ipb.get_ip() == '10.0.0.0'
152     assert ipb.get_ip(255) == '10.0.0.255'
153     with pytest.raises(IndexError):
154         ipb.get_ip(256)
155     ipb = IpBlock('10.0.0.0', '0.0.0.1', 1)
156     assert ipb.get_ip() == '10.0.0.0'
157     with pytest.raises(IndexError):
158         ipb.get_ip(1)
159
160     ipb = IpBlock('10.0.0.0', '0.0.0.2', 256)
161     assert ipb.get_ip() == '10.0.0.0'
162     assert ipb.get_ip(1) == '10.0.0.2'
163     assert ipb.get_ip(127) == '10.0.0.254'
164     assert ipb.get_ip(128) == '10.0.1.0'
165     with pytest.raises(IndexError):
166         ipb.get_ip(256)
167
168     # verify with step larger than 1
169     ipb = IpBlock('10.0.0.0', '0.0.0.2', 256)
170     assert ipb.get_ip() == '10.0.0.0'
171     assert ipb.get_ip(1) == '10.0.0.2'
172     assert ipb.get_ip(128) == '10.0.1.0'
173     assert ipb.get_ip(255) == '10.0.1.254'
174     with pytest.raises(IndexError):
175         ipb.get_ip(256)
176
177 def check_stream_configs(gen_config):
178     """Verify that the range for each chain have adjacent IP ranges without holes between chains."""
179     config = gen_config.config
180     tgc = config['traffic_generator']
181     step = Device.ip_to_int(tgc['ip_addrs_step'])
182     cfc = 0
183     sip = Device.ip_to_int(tgc['ip_addrs'][0].split('/')[0])
184     dip = Device.ip_to_int(tgc['ip_addrs'][1].split('/')[0])
185     stream_configs = gen_config.devices[0].get_stream_configs()
186     for index in range(config['service_chain_count']):
187         stream_cfg = stream_configs[index]
188         assert stream_cfg['ip_src_count'] == stream_cfg['ip_dst_count']
189         assert Device.ip_to_int(stream_cfg['ip_src_addr']) == sip
190         assert Device.ip_to_int(stream_cfg['ip_dst_addr']) == dip
191         count = stream_cfg['ip_src_count']
192         cfc += count
193         sip += count * step
194         dip += count * step
195     assert cfc == int(config['flow_count'] / 2)
196
197 def _check_device_flow_config(step_ip):
198     config = _get_dummy_tg_config('PVP', '1Mpps', scc=10, fc=99999, step_ip=step_ip)
199     gen_config = GeneratorConfig(config)
200     check_stream_configs(gen_config)
201
202 def test_device_flow_config():
203     _check_device_flow_config('0.0.0.1')
204     _check_device_flow_config('0.0.0.2')
205
206 def test_config():
207     refcfg = {1: 100, 2: {21: 100, 22: 200}, 3: None}
208     res1 = {1: 10, 2: {21: 100, 22: 200}, 3: None}
209     res2 = {1: 100, 2: {21: 1000, 22: 200}, 3: None}
210     res3 = {1: 100, 2: {21: 100, 22: 200}, 3: "abc"}
211     assert config_loads("{}", refcfg) == refcfg
212     assert config_loads("{1: 10}", refcfg) == res1
213     assert config_loads("{2: {21: 1000}}", refcfg) == res2
214     assert config_loads('{3: "abc"}', refcfg) == res3
215
216     # correctly fails
217     # pairs of input string and expected subset (None if identical)
218     fail_pairs = [
219         ["{4: 0}", None],
220         ["{2: {21: 100, 30: 50}}", "{2: {30: 50}}"],
221         ["{2: {0: 1, 1: 2}, 5: 5}", None],
222         ["{1: 'abc', 2: {21: 0}}", "{1: 'abc'}"],
223         ["{2: 100}", None]
224     ]
225     for fail_pair in fail_pairs:
226         with pytest.raises(Exception) as e_info:
227             config_loads(fail_pair[0], refcfg)
228         expected = fail_pair[1]
229         if expected is None:
230             expected = fail_pair[0]
231         assert expected in str(e_info)
232
233     # whitelist keys
234     flavor = {'flavor': {'vcpus': 2, 'ram': 8192, 'disk': 0,
235                          'extra_specs': {'hw:cpu_policy': 'dedicated'}}}
236     new_flavor = {'flavor': {'vcpus': 2, 'ram': 8192, 'disk': 0,
237                              'extra_specs': {'hw:cpu_policy': 'dedicated', 'hw:numa_nodes': 2}}}
238     assert config_loads("{'flavor': {'extra_specs': {'hw:numa_nodes': 2}}}", flavor,
239                         whitelist_keys=['alpha', 'extra_specs']) == new_flavor
240
241
242 def test_fluentd():
243     logger = logging.getLogger('fluent-logger')
244
245     class FluentdConfig(dict):
246         def __getattr__(self, attr):
247             return self.get(attr)
248
249     fluentd_configs = [
250         FluentdConfig({
251             'logging_tag': 'nfvbench',
252             'result_tag': 'resultnfvbench',
253             'ip': '127.0.0.1',
254             'port': 7081
255         }),
256         FluentdConfig({
257             'logging_tag': 'nfvbench',
258             'result_tag': 'resultnfvbench',
259             'ip': '127.0.0.1',
260             'port': 24224
261         }),
262         FluentdConfig({
263             'logging_tag': None,
264             'result_tag': 'resultnfvbench',
265             'ip': '127.0.0.1',
266             'port': 7082
267         }),
268         FluentdConfig({
269             'logging_tag': 'nfvbench',
270             'result_tag': None,
271             'ip': '127.0.0.1',
272             'port': 7083
273         })
274     ]
275
276     handler = FluentLogHandler(fluentd_configs=fluentd_configs)
277     logger.addHandler(handler)
278     logger.setLevel(logging.INFO)
279     logger.info('test')
280     logger.warning('test %d', 100)
281
282     try:
283         raise Exception("test")
284     except Exception:
285         logger.exception("got exception")
286
287 def assert_ndr_pdr(stats, ndr, ndr_dr, pdr, pdr_dr):
288     assert stats['ndr']['rate_percent'] == ndr
289     assert stats['ndr']['stats']['overall']['drop_percentage'] == ndr_dr
290     assert_equivalence(pdr, stats['pdr']['rate_percent'])
291     assert_equivalence(pdr_dr, stats['pdr']['stats']['overall']['drop_percentage'])
292
293 def _get_dummy_tg_config(chain_type, rate, scc=1, fc=10, step_ip='0.0.0.1',
294                          ip0='10.0.0.0/8', ip1='20.0.0.0/8'):
295     return AttrDict({
296         'traffic_generator': {'host_name': 'nfvbench_tg',
297                               'default_profile': 'dummy',
298                               'generator_profile': [{'name': 'dummy',
299                                                      'tool': 'dummy',
300                                                      'ip': '127.0.0.1',
301                                                      'intf_speed': '10Gbps',
302                                                      'interfaces': [{'port': 0, 'pci': '0.0'},
303                                                                     {'port': 1, 'pci': '0.0'}]}],
304                               'ip_addrs_step': step_ip,
305                               'ip_addrs': [ip0, ip1],
306                               'tg_gateway_ip_addrs': ['1.1.0.100', '2.2.0.100'],
307                               'tg_gateway_ip_addrs_step': step_ip,
308                               'gateway_ip_addrs': ['1.1.0.2', '2.2.0.2'],
309                               'gateway_ip_addrs_step': step_ip,
310                               'mac_addrs_left': None,
311                               'mac_addrs_right': None,
312                               'udp_src_port': None,
313                               'udp_dst_port': None},
314         'traffic': {'profile': 'profile_64',
315                     'bidirectional': True},
316         'traffic_profile': [{'name': 'profile_64', 'l2frame_size': ['64']}],
317         'generator_profile': None,
318         'service_chain': chain_type,
319         'service_chain_count': scc,
320         'flow_count': fc,
321         'vlan_tagging': True,
322         'no_arp': False,
323         'duration_sec': 1,
324         'interval_sec': 1,
325         'pause_sec': 1,
326         'rate': rate,
327         'check_traffic_time_sec': 200,
328         'generic_poll_sec': 2,
329         'measurement': {'NDR': 0.001, 'PDR': 0.1, 'load_epsilon': 0.1},
330         'l2_loopback': False,
331         'cores': None,
332         'mbuf_factor': None,
333         'disable_hdrh': None,
334         'mbuf_64': None
335
336     })
337
338 def _get_traffic_client():
339     config = _get_dummy_tg_config('PVP', 'ndr_pdr')
340     config['vxlan'] = False
341     config['ndr_run'] = True
342     config['pdr_run'] = True
343     config['generator_profile'] = 'dummy'
344     config['single_run'] = False
345     traffic_client = TrafficClient(config)
346     traffic_client.start_traffic_generator()
347     traffic_client.set_traffic('64', True)
348     return traffic_client
349
350 @patch.object(TrafficClient, 'skip_sleep', lambda x: True)
351 def test_ndr_at_lr():
352     """Test NDR at line rate."""
353     traffic_client = _get_traffic_client()
354     tg = traffic_client.gen
355     # this is a perfect sut with no loss at LR
356     tg.set_response_curve(lr_dr=0, ndr=100, max_actual_tx=100, max_11_tx=100)
357     # tx packets should be line rate for 64B and no drops...
358     assert tg.get_tx_pps_dropped_pps(100) == (LR_64B_PPS, 0)
359     # NDR and PDR should be at 100%
360     # traffic_client.ensure_end_to_end()
361     results = traffic_client.get_ndr_and_pdr()
362     assert_ndr_pdr(results, 200.0, 0.0, 200.0, 0.0)
363
364 @patch.object(TrafficClient, 'skip_sleep', lambda x: True)
365 def test_ndr_at_50():
366     """Test NDR at 50% line rate.
367
368     This is a sut with an NDR of 50% and linear drop rate after NDR up to 20% drops at LR
369     (meaning that if you send 100% TX, you will only receive 80% RX)
370     the tg requested TX/actual TX ratio is up to 50%, after 50%
371     is linear up 80% actuak TX when requesting 100%
372     """
373     traffic_client = _get_traffic_client()
374     tg = traffic_client.gen
375
376     tg.set_response_curve(lr_dr=20, ndr=50, max_actual_tx=80, max_11_tx=50)
377     # tx packets should be half line rate for 64B and no drops...
378     assert tg.get_tx_pps_dropped_pps(50) == (LR_64B_PPS / 2, 0)
379     # at 100% TX requested, actual TX is 80% where the drop rate is 3/5 of 20% of the actual TX
380     assert tg.get_tx_pps_dropped_pps(100) == (int(LR_64B_PPS * 0.8),
381                                               int(LR_64B_PPS * 0.8 * 0.6 * 0.2))
382     results = traffic_client.get_ndr_and_pdr()
383     assert_ndr_pdr(results, 100.0, 0.0, 100.781, 0.09374)
384
385 @patch.object(TrafficClient, 'skip_sleep', lambda x: True)
386 def test_ndr_pdr_low_cpu():
387     """Test NDR and PDR with too low cpu.
388
389     This test is for the case where the TG is underpowered and cannot send fast enough for the NDR
390     true NDR=40%, actual TX at 50% = 30%, actual measured DR is 0%
391     The ndr/pdr should bail out with a warning and a best effort measured NDR of 30%
392     """
393     traffic_client = _get_traffic_client()
394     tg = traffic_client.gen
395     tg.set_response_curve(lr_dr=50, ndr=40, max_actual_tx=60, max_11_tx=0)
396     # tx packets should be 30% at requested half line rate for 64B and no drops...
397     assert tg.get_tx_pps_dropped_pps(50) == (int(LR_64B_PPS * 0.3), 0)
398     results = traffic_client.get_ndr_and_pdr()
399     assert results
400     # import pprint
401     # pp = pprint.PrettyPrinter(indent=4)
402     # pp.pprint(results)
403
404 @patch.object(TrafficClient, 'skip_sleep', lambda x: True)
405 def test_no_openstack():
406     """Test nfvbench using main."""
407     config = _get_dummy_tg_config('EXT', '1000pps')
408     config.openrc_file = None
409     config.vlans = [[100], [200]]
410     config['traffic_generator']['mac_addrs_left'] = ['00:00:00:00:00:00']
411     config['traffic_generator']['mac_addrs_right'] = ['00:00:00:00:01:00']
412     del config['generator_profile']
413     old_argv = sys.argv
414     sys.argv = [old_argv[0], '-c', json.dumps(config)]
415     nfvbench.nfvbench.main()
416     sys.argv = old_argv