10 FILE_LICENCE ( GPL2_OR_LATER );
13 #include <ipxe/bitbash.h>
17 * An I2C device represents a specific slave device on an I2C bus. It
18 * is accessed via an I2C interface.
21 /** Address of this device
23 * The actual address sent on the bus will look like
25 * <start> <device address> <word address overflow> <r/w>
27 * The "word address overflow" is any excess bits from the
28 * word address, i.e. any portion that does not fit within the
29 * defined word address length.
31 unsigned int dev_addr;
32 /** Device address length, in bytes
34 * This is the number of bytes that comprise the device
35 * address, defined to be the portion that terminates with the
38 unsigned int dev_addr_len;
39 /** Word adddress length, in bytes
41 * This is the number of bytes that comprise the word address,
42 * defined to be the portion that starts after the read/write
43 * bit and ends before the first data byte.
45 * For some devices, this length will be zero (i.e. the word
46 * address is contained entirely within the "word address
49 unsigned int word_addr_len;
54 * An I2C interface provides access to an I2C bus, via which I2C
55 * devices may be reached.
57 struct i2c_interface {
59 * Read data from I2C device
61 * @v i2c I2C interface
62 * @v i2cdev I2C device
63 * @v offset Starting offset within the device
65 * @v len Length of data buffer
66 * @ret rc Return status code
68 int ( * read ) ( struct i2c_interface *i2c, struct i2c_device *i2cdev,
69 unsigned int offset, uint8_t *data,
72 * Write data to I2C device
74 * @v i2c I2C interface
75 * @v i2cdev I2C device
76 * @v offset Starting offset within the device
78 * @v len Length of data buffer
79 * @ret rc Return status code
81 int ( * write ) ( struct i2c_interface *i2c, struct i2c_device *i2cdev,
82 unsigned int offset, const uint8_t *data,
86 /** A bit-bashing I2C interface
88 * This provides a standardised way to construct I2C buses via a
89 * bit-bashing interface.
91 struct i2c_bit_basher {
93 struct i2c_interface i2c;
94 /** Bit-bashing interface */
95 struct bit_basher basher;
98 /** Ten-bit address marker
100 * This value is ORed with the I2C device address to indicate a
101 * ten-bit address format on the bus.
103 #define I2C_TENBIT_ADDRESS 0x7800
105 /** An I2C write command */
108 /** An I2C read command */
111 /** Bit indices used for I2C bit-bashing interface */
119 /** Delay required for bit-bashing operation */
122 /** Maximum number of cycles to use when attempting a bus reset */
123 #define I2C_RESET_MAX_CYCLES 32
126 * Check presence of I2C device
128 * @v i2c I2C interface
129 * @v i2cdev I2C device
130 * @ret rc Return status code
132 * Checks for the presence of the device on the I2C bus by attempting
133 * a zero-length write.
135 static inline int i2c_check_presence ( struct i2c_interface *i2c,
136 struct i2c_device *i2cdev ) {
137 return i2c->write ( i2c, i2cdev, 0, NULL, 0 );
140 extern int init_i2c_bit_basher ( struct i2c_bit_basher *i2cbit,
141 struct bit_basher_operations *bash_op );
144 * Initialise generic I2C EEPROM device
146 * @v i2cdev I2C device
148 static inline __always_inline void
149 init_i2c_eeprom ( struct i2c_device *i2cdev, unsigned int dev_addr ) {
150 i2cdev->dev_addr = dev_addr;
151 i2cdev->dev_addr_len = 1;
152 i2cdev->word_addr_len = 1;
156 * Initialise Atmel AT24C11
158 * @v i2cdev I2C device
160 static inline __always_inline void
161 init_at24c11 ( struct i2c_device *i2cdev ) {
162 /* This chip has no device address; it must be the only chip
163 * on the bus. The word address is contained entirely within
164 * the device address field.
166 i2cdev->dev_addr = 0;
167 i2cdev->dev_addr_len = 1;
168 i2cdev->word_addr_len = 0;
171 #endif /* _IPXE_I2C_H */