1 #ifndef CONFIG_GENERAL_H
2 #define CONFIG_GENERAL_H
6 * General configuration
10 FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
12 #include <config/defaults.h>
15 * Banner timeout configuration
17 * This controls the timeout for the "Press Ctrl-B for the iPXE
18 * command line" banner displayed when iPXE starts up. The value is
19 * specified in tenths of a second for which the banner should appear.
20 * A value of 0 disables the banner.
22 * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE"
23 * banner displayed only by ROM builds of iPXE during POST. This
24 * defaults to being twice the length of BANNER_TIMEOUT, to allow for
25 * BIOSes that switch video modes immediately before calling the
26 * initialisation vector, thus rendering the banner almost invisible
29 #define BANNER_TIMEOUT 20
30 #define ROM_BANNER_TIMEOUT ( 2 * BANNER_TIMEOUT )
37 #define NET_PROTO_IPV4 /* IPv4 protocol */
38 #undef NET_PROTO_IPV6 /* IPv6 protocol */
39 #undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */
40 #define NET_PROTO_STP /* Spanning Tree protocol */
46 //#undef PXE_STACK /* PXE stack in iPXE - you want this! */
47 //#undef PXE_MENU /* PXE menu booting */
54 #define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */
55 #define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */
56 #undef DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */
57 #undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */
58 #undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */
59 #undef DOWNLOAD_PROTO_NFS /* Network File System Protocol */
66 //#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */
67 //#undef SANBOOT_PROTO_AOE /* AoE protocol */
68 //#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */
69 //#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */
70 //#undef SANBOOT_PROTO_HTTP /* HTTP SAN protocol */
76 #define HTTP_AUTH_BASIC /* Basic authentication */
77 #define HTTP_AUTH_DIGEST /* Digest authentication */
78 //#define HTTP_ENC_PEERDIST /* PeerDist content encoding */
81 * 802.11 cryptosystems and handshaking protocols
84 #define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */
85 #define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase */
86 #define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */
89 * Name resolution modules
93 #define DNS_RESOLVER /* DNS resolver */
98 * Etherboot supports various image formats. Select whichever ones
102 //#define IMAGE_NBI /* NBI image support */
103 //#define IMAGE_ELF /* ELF image support */
104 //#define IMAGE_MULTIBOOT /* MultiBoot image support */
105 //#define IMAGE_PXE /* PXE image support */
106 //#define IMAGE_SCRIPT /* iPXE script image support */
107 //#define IMAGE_BZIMAGE /* Linux bzImage image support */
108 //#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */
109 //#define IMAGE_EFI /* EFI image support */
110 //#define IMAGE_SDI /* SDI image support */
111 //#define IMAGE_PNM /* PNM image support */
112 //#define IMAGE_PNG /* PNG image support */
115 * Command-line commands to include
118 #define AUTOBOOT_CMD /* Automatic booting */
119 #define NVO_CMD /* Non-volatile option storage commands */
120 #define CONFIG_CMD /* Option configuration console */
121 #define IFMGMT_CMD /* Interface management commands */
122 #define IWMGMT_CMD /* Wireless interface management commands */
123 #define FCMGMT_CMD /* Fibre Channel management commands */
124 #define ROUTE_CMD /* Routing table management commands */
125 #define IMAGE_CMD /* Image management commands */
126 #define DHCP_CMD /* DHCP management commands */
127 #define SANBOOT_CMD /* SAN boot commands */
128 #define MENU_CMD /* Menu commands */
129 #define LOGIN_CMD /* Login command */
130 #define SYNC_CMD /* Sync command */
131 //#define NSLOOKUP_CMD /* DNS resolving command */
132 //#define TIME_CMD /* Time commands */
133 //#define DIGEST_CMD /* Image crypto digest commands */
134 //#define LOTEST_CMD /* Loopback testing commands */
135 //#define VLAN_CMD /* VLAN commands */
136 //#define PXE_CMD /* PXE commands */
137 //#define REBOOT_CMD /* Reboot command */
138 //#define POWEROFF_CMD /* Power off command */
139 //#define IMAGE_TRUST_CMD /* Image trust management commands */
140 //#define PCI_CMD /* PCI commands */
141 //#define PARAM_CMD /* Form parameter commands */
142 //#define NEIGHBOUR_CMD /* Neighbour management commands */
143 //#define PING_CMD /* Ping command */
144 //#define CONSOLE_CMD /* Console command */
145 //#define IPSTAT_CMD /* IP statistics commands */
146 //#define PROFSTAT_CMD /* Profiling commands */
149 * ROM-specific options
152 #undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */
153 #define AUTOBOOT_ROM_FILTER /* Autoboot only devices matching our ROM */
156 * Error message tables to include
159 #undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */
162 * Obscure configuration options
164 * You probably don't need to touch these.
168 #undef BUILD_SERIAL /* Include an automatic build serial
169 * number. Add "bs" to the list of
170 * make targets. For example:
171 * "make bin/rtl8139.dsk bs" */
172 #undef BUILD_ID /* Include a custom build ID string,
174 #undef NULL_TRAP /* Attempt to catch NULL function calls */
175 #undef GDBSERIAL /* Remote GDB debugging over serial */
176 #undef GDBUDP /* Remote GDB debugging over UDP
177 * (both may be set) */
178 //#define EFI_DOWNGRADE_UX /* Downgrade UEFI user experience */
180 #include <config/named.h>
181 #include NAMED_CONFIG(general.h)
182 #include <config/local/general.h>
183 #include LOCAL_NAMED_CONFIG(general.h)
185 #endif /* CONFIG_GENERAL_H */