1 #This file is an example of an environment file for defining the isolated
2 #networks and related parameters.
4 # Network Interface templates to use (these files must exist)
5 OS::TripleO::BlockStorage::Net::SoftwareConfig:
6 ../network/config/single-nic-vlans/cinder-storage.yaml
7 OS::TripleO::Compute::Net::SoftwareConfig:
8 ../network/config/single-nic-vlans/compute.yaml
9 OS::TripleO::Controller::Net::SoftwareConfig:
10 ../network/config/single-nic-vlans/controller.yaml
11 OS::TripleO::ObjectStorage::Net::SoftwareConfig:
12 ../network/config/single-nic-vlans/swift-storage.yaml
13 OS::TripleO::CephStorage::Net::SoftwareConfig:
14 ../network/config/single-nic-vlans/ceph-storage.yaml
17 # This section is where deployment-specific configuration is done
18 # Customize the IP subnets to match the local environment
19 InternalApiNetCidr: 172.17.0.0/24
20 StorageNetCidr: 172.18.0.0/24
21 StorageMgmtNetCidr: 172.19.0.0/24
22 TenantNetCidr: 172.16.0.0/24
23 ExternalNetCidr: 10.0.0.0/24
24 # CIDR subnet mask length for provisioning network
25 ControlPlaneSubnetCidr: '24'
26 # Customize the IP ranges on each network to use for static IPs and VIPs
27 InternalApiAllocationPools: [{'start': '172.17.0.10', 'end': '172.17.0.200'}]
28 StorageAllocationPools: [{'start': '172.18.0.10', 'end': '172.18.0.200'}]
29 StorageMgmtAllocationPools: [{'start': '172.19.0.10', 'end': '172.19.0.200'}]
30 TenantAllocationPools: [{'start': '172.16.0.10', 'end': '172.16.0.200'}]
31 # Leave room if the external network is also used for floating IPs
32 ExternalAllocationPools: [{'start': '10.0.0.10', 'end': '10.0.0.50'}]
33 # Gateway router for the external network
34 ExternalInterfaceDefaultRoute: 10.0.0.1
35 # Gateway router for the provisioning network (or Undercloud IP)
36 ControlPlaneDefaultRoute: 192.0.2.254
37 # Generally the IP of the Undercloud
38 EC2MetadataIp: 192.0.2.1
39 # Define the DNS servers (maximum 2) for the overcloud nodes
40 DnsServers: ["8.8.8.8","8.8.4.4"]
41 # Customize the VLAN IDs to match the local environment
42 InternalApiNetworkVlanID: 10
43 StorageNetworkVlanID: 20
44 StorageMgmtNetworkVlanID: 30
45 TenantNetworkVlanID: 40
46 ExternalNetworkVlanID: 50
47 # Set to empty string to enable multiple external networks or VLANs
48 NeutronExternalNetworkBridge: "''"
49 # Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100"
50 BondInterfaceOvsOptions: "bond_mode=active-backup"