kernel/drivers/regulator/qcom_spmi-regulator.c

   1 /*
   2  * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 and
   6  * only version 2 as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/delay.h>
  16 #include <linux/err.h>
  17 #include <linux/kernel.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/bitops.h>
  20 #include <linux/slab.h>
  21 #include <linux/of.h>
  22 #include <linux/of_device.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/ktime.h>
  25 #include <linux/regulator/driver.h>
  26 #include <linux/regmap.h>
  27 #include <linux/list.h>
  28
  29 /* Pin control enable input pins. */
  30 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_NONE             0x00
  31 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN0              0x01
  32 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN1              0x02
  33 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN2              0x04
  34 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN3              0x08
  35 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT       0x10
  36
  37 /* Pin control high power mode input pins. */
  38 #define SPMI_REGULATOR_PIN_CTRL_HPM_NONE                0x00
  39 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN0                 0x01
  40 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN1                 0x02
  41 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN2                 0x04
  42 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN3                 0x08
  43 #define SPMI_REGULATOR_PIN_CTRL_HPM_SLEEP_B             0x10
  44 #define SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT          0x20
  45
  46 /*
  47  * Used with enable parameters to specify that hardware default register values
  48  * should be left unaltered.
  49  */
  50 #define SPMI_REGULATOR_USE_HW_DEFAULT                   2
  51
  52 /* Soft start strength of a voltage switch type regulator */
  53 enum spmi_vs_soft_start_str {
  54         SPMI_VS_SOFT_START_STR_0P05_UA = 0,
  55         SPMI_VS_SOFT_START_STR_0P25_UA,
  56         SPMI_VS_SOFT_START_STR_0P55_UA,
  57         SPMI_VS_SOFT_START_STR_0P75_UA,
  58         SPMI_VS_SOFT_START_STR_HW_DEFAULT,
  59 };
  60
  61 /**
  62  * struct spmi_regulator_init_data - spmi-regulator initialization data
  63  * @pin_ctrl_enable:        Bit mask specifying which hardware pins should be
  64  *                              used to enable the regulator, if any
  65  *                          Value should be an ORing of
  66  *                              SPMI_REGULATOR_PIN_CTRL_ENABLE_* constants.  If
  67  *                              the bit specified by
  68  *                              SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT is
  69  *                              set, then pin control enable hardware registers
  70  *                              will not be modified.
  71  * @pin_ctrl_hpm:           Bit mask specifying which hardware pins should be
  72  *                              used to force the regulator into high power
  73  *                              mode, if any
  74  *                          Value should be an ORing of
  75  *                              SPMI_REGULATOR_PIN_CTRL_HPM_* constants.  If
  76  *                              the bit specified by
  77  *                              SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT is
  78  *                              set, then pin control mode hardware registers
  79  *                              will not be modified.
  80  * @vs_soft_start_strength: This parameter sets the soft start strength for
  81  *                              voltage switch type regulators.  Its value
  82  *                              should be one of SPMI_VS_SOFT_START_STR_*.  If
  83  *                              its value is SPMI_VS_SOFT_START_STR_HW_DEFAULT,
  84  *                              then the soft start strength will be left at its
  85  *                              default hardware value.
  86  */
  87 struct spmi_regulator_init_data {
  88         unsigned                                pin_ctrl_enable;
  89         unsigned                                pin_ctrl_hpm;
  90         enum spmi_vs_soft_start_str             vs_soft_start_strength;
  91 };
  92
  93 /* These types correspond to unique register layouts. */
  94 enum spmi_regulator_logical_type {
  95         SPMI_REGULATOR_LOGICAL_TYPE_SMPS,
  96         SPMI_REGULATOR_LOGICAL_TYPE_LDO,
  97         SPMI_REGULATOR_LOGICAL_TYPE_VS,
  98         SPMI_REGULATOR_LOGICAL_TYPE_BOOST,
  99         SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS,
 100         SPMI_REGULATOR_LOGICAL_TYPE_BOOST_BYP,
 101         SPMI_REGULATOR_LOGICAL_TYPE_LN_LDO,
 102         SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
 103         SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
 104         SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
 105 };
 106
 107 enum spmi_regulator_type {
 108         SPMI_REGULATOR_TYPE_BUCK                = 0x03,
 109         SPMI_REGULATOR_TYPE_LDO                 = 0x04,
 110         SPMI_REGULATOR_TYPE_VS                  = 0x05,
 111         SPMI_REGULATOR_TYPE_BOOST               = 0x1b,
 112         SPMI_REGULATOR_TYPE_FTS                 = 0x1c,
 113         SPMI_REGULATOR_TYPE_BOOST_BYP           = 0x1f,
 114         SPMI_REGULATOR_TYPE_ULT_LDO             = 0x21,
 115         SPMI_REGULATOR_TYPE_ULT_BUCK            = 0x22,
 116 };
 117
 118 enum spmi_regulator_subtype {
 119         SPMI_REGULATOR_SUBTYPE_GP_CTL           = 0x08,
 120         SPMI_REGULATOR_SUBTYPE_RF_CTL           = 0x09,
 121         SPMI_REGULATOR_SUBTYPE_N50              = 0x01,
 122         SPMI_REGULATOR_SUBTYPE_N150             = 0x02,
 123         SPMI_REGULATOR_SUBTYPE_N300             = 0x03,
 124         SPMI_REGULATOR_SUBTYPE_N600             = 0x04,
 125         SPMI_REGULATOR_SUBTYPE_N1200            = 0x05,
 126         SPMI_REGULATOR_SUBTYPE_N600_ST          = 0x06,
 127         SPMI_REGULATOR_SUBTYPE_N1200_ST         = 0x07,
 128         SPMI_REGULATOR_SUBTYPE_N900_ST          = 0x14,
 129         SPMI_REGULATOR_SUBTYPE_N300_ST          = 0x15,
 130         SPMI_REGULATOR_SUBTYPE_P50              = 0x08,
 131         SPMI_REGULATOR_SUBTYPE_P150             = 0x09,
 132         SPMI_REGULATOR_SUBTYPE_P300             = 0x0a,
 133         SPMI_REGULATOR_SUBTYPE_P600             = 0x0b,
 134         SPMI_REGULATOR_SUBTYPE_P1200            = 0x0c,
 135         SPMI_REGULATOR_SUBTYPE_LN               = 0x10,
 136         SPMI_REGULATOR_SUBTYPE_LV_P50           = 0x28,
 137         SPMI_REGULATOR_SUBTYPE_LV_P150          = 0x29,
 138         SPMI_REGULATOR_SUBTYPE_LV_P300          = 0x2a,
 139         SPMI_REGULATOR_SUBTYPE_LV_P600          = 0x2b,
 140         SPMI_REGULATOR_SUBTYPE_LV_P1200         = 0x2c,
 141         SPMI_REGULATOR_SUBTYPE_LV_P450          = 0x2d,
 142         SPMI_REGULATOR_SUBTYPE_LV100            = 0x01,
 143         SPMI_REGULATOR_SUBTYPE_LV300            = 0x02,
 144         SPMI_REGULATOR_SUBTYPE_MV300            = 0x08,
 145         SPMI_REGULATOR_SUBTYPE_MV500            = 0x09,
 146         SPMI_REGULATOR_SUBTYPE_HDMI             = 0x10,
 147         SPMI_REGULATOR_SUBTYPE_OTG              = 0x11,
 148         SPMI_REGULATOR_SUBTYPE_5V_BOOST         = 0x01,
 149         SPMI_REGULATOR_SUBTYPE_FTS_CTL          = 0x08,
 150         SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL       = 0x09,
 151         SPMI_REGULATOR_SUBTYPE_BB_2A            = 0x01,
 152         SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1      = 0x0d,
 153         SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2      = 0x0e,
 154         SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3      = 0x0f,
 155         SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4      = 0x10,
 156 };
 157
 158 enum spmi_common_regulator_registers {
 159         SPMI_COMMON_REG_DIG_MAJOR_REV           = 0x01,
 160         SPMI_COMMON_REG_TYPE                    = 0x04,
 161         SPMI_COMMON_REG_SUBTYPE                 = 0x05,
 162         SPMI_COMMON_REG_VOLTAGE_RANGE           = 0x40,
 163         SPMI_COMMON_REG_VOLTAGE_SET             = 0x41,
 164         SPMI_COMMON_REG_MODE                    = 0x45,
 165         SPMI_COMMON_REG_ENABLE                  = 0x46,
 166         SPMI_COMMON_REG_PULL_DOWN               = 0x48,
 167         SPMI_COMMON_REG_SOFT_START              = 0x4c,
 168         SPMI_COMMON_REG_STEP_CTRL               = 0x61,
 169 };
 170
 171 enum spmi_vs_registers {
 172         SPMI_VS_REG_OCP                         = 0x4a,
 173         SPMI_VS_REG_SOFT_START                  = 0x4c,
 174 };
 175
 176 enum spmi_boost_registers {
 177         SPMI_BOOST_REG_CURRENT_LIMIT            = 0x4a,
 178 };
 179
 180 enum spmi_boost_byp_registers {
 181         SPMI_BOOST_BYP_REG_CURRENT_LIMIT        = 0x4b,
 182 };
 183
 184 /* Used for indexing into ctrl_reg.  These are offets from 0x40 */
 185 enum spmi_common_control_register_index {
 186         SPMI_COMMON_IDX_VOLTAGE_RANGE           = 0,
 187         SPMI_COMMON_IDX_VOLTAGE_SET             = 1,
 188         SPMI_COMMON_IDX_MODE                    = 5,
 189         SPMI_COMMON_IDX_ENABLE                  = 6,
 190 };
 191
 192 /* Common regulator control register layout */
 193 #define SPMI_COMMON_ENABLE_MASK                 0x80
 194 #define SPMI_COMMON_ENABLE                      0x80
 195 #define SPMI_COMMON_DISABLE                     0x00
 196 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN3_MASK   0x08
 197 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN2_MASK   0x04
 198 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN1_MASK   0x02
 199 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN0_MASK   0x01
 200 #define SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK      0x0f
 201
 202 /* Common regulator mode register layout */
 203 #define SPMI_COMMON_MODE_HPM_MASK               0x80
 204 #define SPMI_COMMON_MODE_AUTO_MASK              0x40
 205 #define SPMI_COMMON_MODE_BYPASS_MASK            0x20
 206 #define SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK      0x10
 207 #define SPMI_COMMON_MODE_FOLLOW_HW_EN3_MASK     0x08
 208 #define SPMI_COMMON_MODE_FOLLOW_HW_EN2_MASK     0x04
 209 #define SPMI_COMMON_MODE_FOLLOW_HW_EN1_MASK     0x02
 210 #define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK     0x01
 211 #define SPMI_COMMON_MODE_FOLLOW_ALL_MASK        0x1f
 212
 213 /* Common regulator pull down control register layout */
 214 #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK       0x80
 215
 216 /* LDO regulator current limit control register layout */
 217 #define SPMI_LDO_CURRENT_LIMIT_ENABLE_MASK      0x80
 218
 219 /* LDO regulator soft start control register layout */
 220 #define SPMI_LDO_SOFT_START_ENABLE_MASK         0x80
 221
 222 /* VS regulator over current protection control register layout */
 223 #define SPMI_VS_OCP_OVERRIDE                    0x01
 224 #define SPMI_VS_OCP_NO_OVERRIDE                 0x00
 225
 226 /* VS regulator soft start control register layout */
 227 #define SPMI_VS_SOFT_START_ENABLE_MASK          0x80
 228 #define SPMI_VS_SOFT_START_SEL_MASK             0x03
 229
 230 /* Boost regulator current limit control register layout */
 231 #define SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK    0x80
 232 #define SPMI_BOOST_CURRENT_LIMIT_MASK           0x07
 233
 234 #define SPMI_VS_OCP_DEFAULT_MAX_RETRIES         10
 235 #define SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS      30
 236 #define SPMI_VS_OCP_FALL_DELAY_US               90
 237 #define SPMI_VS_OCP_FAULT_DELAY_US              20000
 238
 239 #define SPMI_FTSMPS_STEP_CTRL_STEP_MASK         0x18
 240 #define SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT        3
 241 #define SPMI_FTSMPS_STEP_CTRL_DELAY_MASK        0x07
 242 #define SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT       0
 243
 244 /* Clock rate in kHz of the FTSMPS regulator reference clock. */
 245 #define SPMI_FTSMPS_CLOCK_RATE          19200
 246
 247 /* Minimum voltage stepper delay for each step. */
 248 #define SPMI_FTSMPS_STEP_DELAY          8
 249
 250 /*
 251  * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
 252  * adjust the step rate in order to account for oscillator variance.
 253  */
 254 #define SPMI_FTSMPS_STEP_MARGIN_NUM     4
 255 #define SPMI_FTSMPS_STEP_MARGIN_DEN     5
 256
 257 /*
 258  * This voltage in uV is returned by get_voltage functions when there is no way
 259  * to determine the current voltage level.  It is needed because the regulator
 260  * framework treats a 0 uV voltage as an error.
 261  */
 262 #define VOLTAGE_UNKNOWN 1
 263
 264 /* VSET value to decide the range of ULT SMPS */
 265 #define ULT_SMPS_RANGE_SPLIT 0x60
 266
 267 /**
 268  * struct spmi_voltage_range - regulator set point voltage mapping description
 269  * @min_uV:             Minimum programmable output voltage resulting from
 270  *                      set point register value 0x00
 271  * @max_uV:             Maximum programmable output voltage
 272  * @step_uV:            Output voltage increase resulting from the set point
 273  *                      register value increasing by 1
 274  * @set_point_min_uV:   Minimum allowed voltage
 275  * @set_point_max_uV:   Maximum allowed voltage.  This may be tweaked in order
 276  *                      to pick which range should be used in the case of
 277  *                      overlapping set points.
 278  * @n_voltages:         Number of preferred voltage set points present in this
 279  *                      range
 280  * @range_sel:          Voltage range register value corresponding to this range
 281  *
 282  * The following relationships must be true for the values used in this struct:
 283  * (max_uV - min_uV) % step_uV == 0
 284  * (set_point_min_uV - min_uV) % step_uV == 0*
 285  * (set_point_max_uV - min_uV) % step_uV == 0*
 286  * n_voltages = (set_point_max_uV - set_point_min_uV) / step_uV + 1
 287  *
 288  * *Note, set_point_min_uV == set_point_max_uV == 0 is allowed in order to
 289  * specify that the voltage range has meaning, but is not preferred.
 290  */
 291 struct spmi_voltage_range {
 292         int                                     min_uV;
 293         int                                     max_uV;
 294         int                                     step_uV;
 295         int                                     set_point_min_uV;
 296         int                                     set_point_max_uV;
 297         unsigned                                n_voltages;
 298         u8                                      range_sel;
 299 };
 300
 301 /*
 302  * The ranges specified in the spmi_voltage_set_points struct must be listed
 303  * so that range[i].set_point_max_uV < range[i+1].set_point_min_uV.
 304  */
 305 struct spmi_voltage_set_points {
 306         struct spmi_voltage_range               *range;
 307         int                                     count;
 308         unsigned                                n_voltages;
 309 };
 310
 311 struct spmi_regulator {
 312         struct regulator_desc                   desc;
 313         struct device                           *dev;
 314         struct delayed_work                     ocp_work;
 315         struct regmap                           *regmap;
 316         struct spmi_voltage_set_points          *set_points;
 317         enum spmi_regulator_logical_type        logical_type;
 318         int                                     ocp_irq;
 319         int                                     ocp_count;
 320         int                                     ocp_max_retries;
 321         int                                     ocp_retry_delay_ms;
 322         int                                     hpm_min_load;
 323         int                                     slew_rate;
 324         ktime_t                                 vs_enable_time;
 325         u16                                     base;
 326         struct list_head                        node;
 327 };
 328
 329 struct spmi_regulator_mapping {
 330         enum spmi_regulator_type                type;
 331         enum spmi_regulator_subtype             subtype;
 332         enum spmi_regulator_logical_type        logical_type;
 333         u32                                     revision_min;
 334         u32                                     revision_max;
 335         struct regulator_ops                    *ops;
 336         struct spmi_voltage_set_points          *set_points;
 337         int                                     hpm_min_load;
 338 };
 339
 340 struct spmi_regulator_data {
 341         const char                      *name;
 342         u16                             base;
 343         const char                      *supply;
 344         const char                      *ocp;
 345         u16                             force_type;
 346 };
 347
 348 #define SPMI_VREG(_type, _subtype, _dig_major_min, _dig_major_max, \
 349                       _logical_type, _ops_val, _set_points_val, _hpm_min_load) \
 350         { \
 351                 .type           = SPMI_REGULATOR_TYPE_##_type, \
 352                 .subtype        = SPMI_REGULATOR_SUBTYPE_##_subtype, \
 353                 .revision_min   = _dig_major_min, \
 354                 .revision_max   = _dig_major_max, \
 355                 .logical_type   = SPMI_REGULATOR_LOGICAL_TYPE_##_logical_type, \
 356                 .ops            = &spmi_##_ops_val##_ops, \
 357                 .set_points     = &_set_points_val##_set_points, \
 358                 .hpm_min_load   = _hpm_min_load, \
 359         }
 360
 361 #define SPMI_VREG_VS(_subtype, _dig_major_min, _dig_major_max) \
 362         { \
 363                 .type           = SPMI_REGULATOR_TYPE_VS, \
 364                 .subtype        = SPMI_REGULATOR_SUBTYPE_##_subtype, \
 365                 .revision_min   = _dig_major_min, \
 366                 .revision_max   = _dig_major_max, \
 367                 .logical_type   = SPMI_REGULATOR_LOGICAL_TYPE_VS, \
 368                 .ops            = &spmi_vs_ops, \
 369         }
 370
 371 #define SPMI_VOLTAGE_RANGE(_range_sel, _min_uV, _set_point_min_uV, \
 372                         _set_point_max_uV, _max_uV, _step_uV) \
 373         { \
 374                 .min_uV                 = _min_uV, \
 375                 .max_uV                 = _max_uV, \
 376                 .set_point_min_uV       = _set_point_min_uV, \
 377                 .set_point_max_uV       = _set_point_max_uV, \
 378                 .step_uV                = _step_uV, \
 379                 .range_sel              = _range_sel, \
 380         }
 381
 382 #define DEFINE_SPMI_SET_POINTS(name) \
 383 struct spmi_voltage_set_points name##_set_points = { \
 384         .range  = name##_ranges, \
 385         .count  = ARRAY_SIZE(name##_ranges), \
 386 }
 387
 388 /*
 389  * These tables contain the physically available PMIC regulator voltage setpoint
 390  * ranges.  Where two ranges overlap in hardware, one of the ranges is trimmed
 391  * to ensure that the setpoints available to software are monotonically
 392  * increasing and unique.  The set_voltage callback functions expect these
 393  * properties to hold.
 394  */
 395 static struct spmi_voltage_range pldo_ranges[] = {
 396         SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
 397         SPMI_VOLTAGE_RANGE(3, 1500000, 1550000, 3075000, 3075000, 25000),
 398         SPMI_VOLTAGE_RANGE(4, 1750000, 3100000, 4900000, 4900000, 50000),
 399 };
 400
 401 static struct spmi_voltage_range nldo1_ranges[] = {
 402         SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
 403 };
 404
 405 static struct spmi_voltage_range nldo2_ranges[] = {
 406         SPMI_VOLTAGE_RANGE(0,  375000,       0,       0, 1537500, 12500),
 407         SPMI_VOLTAGE_RANGE(1,  375000,  375000,  768750,  768750,  6250),
 408         SPMI_VOLTAGE_RANGE(2,  750000,  775000, 1537500, 1537500, 12500),
 409 };
 410
 411 static struct spmi_voltage_range nldo3_ranges[] = {
 412         SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
 413         SPMI_VOLTAGE_RANGE(1,  375000,       0,       0, 1537500, 12500),
 414         SPMI_VOLTAGE_RANGE(2,  750000,       0,       0, 1537500, 12500),
 415 };
 416
 417 static struct spmi_voltage_range ln_ldo_ranges[] = {
 418         SPMI_VOLTAGE_RANGE(1,  690000,  690000, 1110000, 1110000, 60000),
 419         SPMI_VOLTAGE_RANGE(0, 1380000, 1380000, 2220000, 2220000, 120000),
 420 };
 421
 422 static struct spmi_voltage_range smps_ranges[] = {
 423         SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
 424         SPMI_VOLTAGE_RANGE(1, 1550000, 1575000, 3125000, 3125000, 25000),
 425 };
 426
 427 static struct spmi_voltage_range ftsmps_ranges[] = {
 428         SPMI_VOLTAGE_RANGE(0,       0,  350000, 1275000, 1275000,  5000),
 429         SPMI_VOLTAGE_RANGE(1,       0, 1280000, 2040000, 2040000, 10000),
 430 };
 431
 432 static struct spmi_voltage_range ftsmps2p5_ranges[] = {
 433         SPMI_VOLTAGE_RANGE(0,   80000,  350000, 1355000, 1355000,  5000),
 434         SPMI_VOLTAGE_RANGE(1,  160000, 1360000, 2200000, 2200000, 10000),
 435 };
 436
 437 static struct spmi_voltage_range boost_ranges[] = {
 438         SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000),
 439 };
 440
 441 static struct spmi_voltage_range boost_byp_ranges[] = {
 442         SPMI_VOLTAGE_RANGE(0, 2500000, 2500000, 5200000, 5650000, 50000),
 443 };
 444
 445 static struct spmi_voltage_range ult_lo_smps_ranges[] = {
 446         SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
 447         SPMI_VOLTAGE_RANGE(1,  750000,       0,       0, 1525000, 25000),
 448 };
 449
 450 static struct spmi_voltage_range ult_ho_smps_ranges[] = {
 451         SPMI_VOLTAGE_RANGE(0, 1550000, 1550000, 2325000, 2325000, 25000),
 452 };
 453
 454 static struct spmi_voltage_range ult_nldo_ranges[] = {
 455         SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
 456 };
 457
 458 static struct spmi_voltage_range ult_pldo_ranges[] = {
 459         SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
 460 };
 461
 462 static DEFINE_SPMI_SET_POINTS(pldo);
 463 static DEFINE_SPMI_SET_POINTS(nldo1);
 464 static DEFINE_SPMI_SET_POINTS(nldo2);
 465 static DEFINE_SPMI_SET_POINTS(nldo3);
 466 static DEFINE_SPMI_SET_POINTS(ln_ldo);
 467 static DEFINE_SPMI_SET_POINTS(smps);
 468 static DEFINE_SPMI_SET_POINTS(ftsmps);
 469 static DEFINE_SPMI_SET_POINTS(ftsmps2p5);
 470 static DEFINE_SPMI_SET_POINTS(boost);
 471 static DEFINE_SPMI_SET_POINTS(boost_byp);
 472 static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
 473 static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
 474 static DEFINE_SPMI_SET_POINTS(ult_nldo);
 475 static DEFINE_SPMI_SET_POINTS(ult_pldo);
 476
 477 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 478                                  int len)
 479 {
 480         return regmap_bulk_read(vreg->regmap, vreg->base + addr, buf, len);
 481 }
 482
 483 static inline int spmi_vreg_write(struct spmi_regulator *vreg, u16 addr,
 484                                 u8 *buf, int len)
 485 {
 486         return regmap_bulk_write(vreg->regmap, vreg->base + addr, buf, len);
 487 }
 488
 489 static int spmi_vreg_update_bits(struct spmi_regulator *vreg, u16 addr, u8 val,
 490                 u8 mask)
 491 {
 492         return regmap_update_bits(vreg->regmap, vreg->base + addr, mask, val);
 493 }
 494
 495 static int spmi_regulator_common_is_enabled(struct regulator_dev *rdev)
 496 {
 497         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 498         u8 reg;
 499
 500         spmi_vreg_read(vreg, SPMI_COMMON_REG_ENABLE, &reg, 1);
 501
 502         return (reg & SPMI_COMMON_ENABLE_MASK) == SPMI_COMMON_ENABLE;
 503 }
 504
 505 static int spmi_regulator_common_enable(struct regulator_dev *rdev)
 506 {
 507         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 508
 509         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
 510                 SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
 511 }
 512
 513 static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
 514 {
 515         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 516
 517         if (vreg->ocp_irq) {
 518                 vreg->ocp_count = 0;
 519                 vreg->vs_enable_time = ktime_get();
 520         }
 521
 522         return spmi_regulator_common_enable(rdev);
 523 }
 524
 525 static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
 526 {
 527         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 528         u8 reg = SPMI_VS_OCP_OVERRIDE;
 529
 530         return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, &reg, 1);
 531 }
 532
 533 static int spmi_regulator_common_disable(struct regulator_dev *rdev)
 534 {
 535         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 536
 537         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
 538                 SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
 539 }
 540
 541 static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
 542                 int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
 543                 unsigned *selector)
 544 {
 545         const struct spmi_voltage_range *range;
 546         int uV = min_uV;
 547         int lim_min_uV, lim_max_uV, i, range_id, range_max_uV;
 548
 549         /* Check if request voltage is outside of physically settable range. */
 550         lim_min_uV = vreg->set_points->range[0].set_point_min_uV;
 551         lim_max_uV =
 552           vreg->set_points->range[vreg->set_points->count - 1].set_point_max_uV;
 553
 554         if (uV < lim_min_uV && max_uV >= lim_min_uV)
 555                 uV = lim_min_uV;
 556
 557         if (uV < lim_min_uV || uV > lim_max_uV) {
 558                 dev_err(vreg->dev,
 559                         "request v=[%d, %d] is outside possible v=[%d, %d]\n",
 560                          min_uV, max_uV, lim_min_uV, lim_max_uV);
 561                 return -EINVAL;
 562         }
 563
 564         /* Find the range which uV is inside of. */
 565         for (i = vreg->set_points->count - 1; i > 0; i--) {
 566                 range_max_uV = vreg->set_points->range[i - 1].set_point_max_uV;
 567                 if (uV > range_max_uV && range_max_uV > 0)
 568                         break;
 569         }
 570
 571         range_id = i;
 572         range = &vreg->set_points->range[range_id];
 573         *range_sel = range->range_sel;
 574
 575         /*
 576          * Force uV to be an allowed set point by applying a ceiling function to
 577          * the uV value.
 578          */
 579         *voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
 580         uV = *voltage_sel * range->step_uV + range->min_uV;
 581
 582         if (uV > max_uV) {
 583                 dev_err(vreg->dev,
 584                         "request v=[%d, %d] cannot be met by any set point; "
 585                         "next set point: %d\n",
 586                         min_uV, max_uV, uV);
 587                 return -EINVAL;
 588         }
 589
 590         *selector = 0;
 591         for (i = 0; i < range_id; i++)
 592                 *selector += vreg->set_points->range[i].n_voltages;
 593         *selector += (uV - range->set_point_min_uV) / range->step_uV;
 594
 595         return 0;
 596 }
 597
 598 static const struct spmi_voltage_range *
 599 spmi_regulator_find_range(struct spmi_regulator *vreg)
 600 {
 601         u8 range_sel;
 602         const struct spmi_voltage_range *range, *end;
 603
 604         range = vreg->set_points->range;
 605         end = range + vreg->set_points->count;
 606
 607         spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, &range_sel, 1);
 608
 609         for (; range < end; range++)
 610                 if (range->range_sel == range_sel)
 611                         return range;
 612
 613         return NULL;
 614 }
 615
 616 static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
 617                 int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
 618                 unsigned *selector)
 619 {
 620         const struct spmi_voltage_range *range;
 621         int uV = min_uV;
 622         int i;
 623
 624         range = spmi_regulator_find_range(vreg);
 625         if (!range)
 626                 goto different_range;
 627
 628         if (uV < range->min_uV && max_uV >= range->min_uV)
 629                 uV = range->min_uV;
 630
 631         if (uV < range->min_uV || uV > range->max_uV) {
 632                 /* Current range doesn't support the requested voltage. */
 633                 goto different_range;
 634         }
 635
 636         /*
 637          * Force uV to be an allowed set point by applying a ceiling function to
 638          * the uV value.
 639          */
 640         *voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
 641         uV = *voltage_sel * range->step_uV + range->min_uV;
 642
 643         if (uV > max_uV) {
 644                 /*
 645                  * No set point in the current voltage range is within the
 646                  * requested min_uV to max_uV range.
 647                  */
 648                 goto different_range;
 649         }
 650
 651         *selector = 0;
 652         for (i = 0; i < vreg->set_points->count; i++) {
 653                 if (uV >= vreg->set_points->range[i].set_point_min_uV
 654                     && uV <= vreg->set_points->range[i].set_point_max_uV) {
 655                         *selector +=
 656                             (uV - vreg->set_points->range[i].set_point_min_uV)
 657                                 / vreg->set_points->range[i].step_uV;
 658                         break;
 659                 }
 660
 661                 *selector += vreg->set_points->range[i].n_voltages;
 662         }
 663
 664         if (*selector >= vreg->set_points->n_voltages)
 665                 goto different_range;
 666
 667         return 0;
 668
 669 different_range:
 670         return spmi_regulator_select_voltage(vreg, min_uV, max_uV,
 671                         range_sel, voltage_sel, selector);
 672 }
 673
 674 static int spmi_regulator_common_set_voltage(struct regulator_dev *rdev,
 675                 int min_uV, int max_uV, unsigned *selector)
 676 {
 677         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 678         int ret;
 679         u8 buf[2];
 680         u8 range_sel, voltage_sel;
 681
 682         /*
 683          * Favor staying in the current voltage range if possible.  This avoids
 684          * voltage spikes that occur when changing the voltage range.
 685          */
 686         ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
 687                 &range_sel, &voltage_sel, selector);
 688         if (ret)
 689                 return ret;
 690
 691         buf[0] = range_sel;
 692         buf[1] = voltage_sel;
 693         return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2);
 694 }
 695
 696 static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 697                 unsigned int old_selector, unsigned int new_selector)
 698 {
 699         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 700         const struct spmi_voltage_range *range;
 701         int diff_uV;
 702
 703         range = spmi_regulator_find_range(vreg);
 704         if (!range)
 705                 return -EINVAL;
 706
 707         diff_uV = abs(new_selector - old_selector) * range->step_uV;
 708
 709         return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
 710 }
 711
 712 static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev)
 713 {
 714         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 715         const struct spmi_voltage_range *range;
 716         u8 voltage_sel;
 717
 718         spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
 719
 720         range = spmi_regulator_find_range(vreg);
 721         if (!range)
 722                 return VOLTAGE_UNKNOWN;
 723
 724         return range->step_uV * voltage_sel + range->min_uV;
 725 }
 726
 727 static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
 728                 int min_uV, int max_uV, unsigned *selector)
 729 {
 730         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 731         int ret;
 732         u8 range_sel, sel;
 733
 734         ret = spmi_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel,
 735                 &sel, selector);
 736         if (ret) {
 737                 dev_err(vreg->dev, "could not set voltage, ret=%d\n", ret);
 738                 return ret;
 739         }
 740
 741         /*
 742          * Certain types of regulators do not have a range select register so
 743          * only voltage set register needs to be written.
 744          */
 745         return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &sel, 1);
 746 }
 747
 748 static int spmi_regulator_single_range_get_voltage(struct regulator_dev *rdev)
 749 {
 750         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 751         const struct spmi_voltage_range *range = vreg->set_points->range;
 752         u8 voltage_sel;
 753
 754         spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
 755
 756         return range->step_uV * voltage_sel + range->min_uV;
 757 }
 758
 759 static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
 760                 int min_uV, int max_uV, unsigned *selector)
 761 {
 762         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 763         int ret;
 764         u8 range_sel, voltage_sel;
 765
 766         /*
 767          * Favor staying in the current voltage range if possible. This avoids
 768          * voltage spikes that occur when changing the voltage range.
 769          */
 770         ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
 771                 &range_sel, &voltage_sel, selector);
 772         if (ret)
 773                 return ret;
 774
 775         /*
 776          * Calculate VSET based on range
 777          * In case of range 0: voltage_sel is a 7 bit value, can be written
 778          *                      witout any modification.
 779          * In case of range 1: voltage_sel is a 5 bit value, bits[7-5] set to
 780          *                      [011].
 781          */
 782         if (range_sel == 1)
 783                 voltage_sel |= ULT_SMPS_RANGE_SPLIT;
 784
 785         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_VOLTAGE_SET,
 786                voltage_sel, 0xff);
 787 }
 788
 789 static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
 790 {
 791         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 792         const struct spmi_voltage_range *range;
 793         u8 voltage_sel;
 794
 795         spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
 796
 797         range = spmi_regulator_find_range(vreg);
 798         if (!range)
 799                 return VOLTAGE_UNKNOWN;
 800
 801         if (range->range_sel == 1)
 802                 voltage_sel &= ~ULT_SMPS_RANGE_SPLIT;
 803
 804         return range->step_uV * voltage_sel + range->min_uV;
 805 }
 806
 807 static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
 808                         unsigned selector)
 809 {
 810         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 811         int uV = 0;
 812         int i;
 813
 814         if (selector >= vreg->set_points->n_voltages)
 815                 return 0;
 816
 817         for (i = 0; i < vreg->set_points->count; i++) {
 818                 if (selector < vreg->set_points->range[i].n_voltages) {
 819                         uV = selector * vreg->set_points->range[i].step_uV
 820                                 + vreg->set_points->range[i].set_point_min_uV;
 821                         break;
 822                 }
 823
 824                 selector -= vreg->set_points->range[i].n_voltages;
 825         }
 826
 827         return uV;
 828 }
 829
 830 static int
 831 spmi_regulator_common_set_bypass(struct regulator_dev *rdev, bool enable)
 832 {
 833         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 834         u8 mask = SPMI_COMMON_MODE_BYPASS_MASK;
 835         u8 val = 0;
 836
 837         if (enable)
 838                 val = mask;
 839
 840         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
 841 }
 842
 843 static int
 844 spmi_regulator_common_get_bypass(struct regulator_dev *rdev, bool *enable)
 845 {
 846         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 847         u8 val;
 848         int ret;
 849
 850         ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &val, 1);
 851         *enable = val & SPMI_COMMON_MODE_BYPASS_MASK;
 852
 853         return ret;
 854 }
 855
 856 static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
 857 {
 858         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 859         u8 reg;
 860
 861         spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
 862
 863         if (reg & SPMI_COMMON_MODE_HPM_MASK)
 864                 return REGULATOR_MODE_NORMAL;
 865
 866         if (reg & SPMI_COMMON_MODE_AUTO_MASK)
 867                 return REGULATOR_MODE_FAST;
 868
 869         return REGULATOR_MODE_IDLE;
 870 }
 871
 872 static int
 873 spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
 874 {
 875         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 876         u8 mask = SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK;
 877         u8 val = 0;
 878
 879         if (mode == REGULATOR_MODE_NORMAL)
 880                 val = SPMI_COMMON_MODE_HPM_MASK;
 881         else if (mode == REGULATOR_MODE_FAST)
 882                 val = SPMI_COMMON_MODE_AUTO_MASK;
 883
 884         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
 885 }
 886
 887 static int
 888 spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
 889 {
 890         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 891         unsigned int mode;
 892
 893         if (load_uA >= vreg->hpm_min_load)
 894                 mode = REGULATOR_MODE_NORMAL;
 895         else
 896                 mode = REGULATOR_MODE_IDLE;
 897
 898         return spmi_regulator_common_set_mode(rdev, mode);
 899 }
 900
 901 static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
 902 {
 903         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 904         unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
 905
 906         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_PULL_DOWN,
 907                                      mask, mask);
 908 }
 909
 910 static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
 911 {
 912         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 913         unsigned int mask = SPMI_LDO_SOFT_START_ENABLE_MASK;
 914
 915         return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_SOFT_START,
 916                                      mask, mask);
 917 }
 918
 919 static int spmi_regulator_set_ilim(struct regulator_dev *rdev, int ilim_uA)
 920 {
 921         struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 922         enum spmi_regulator_logical_type type = vreg->logical_type;
 923         unsigned int current_reg;
 924         u8 reg;
 925         u8 mask = SPMI_BOOST_CURRENT_LIMIT_MASK |
 926                   SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
 927         int max = (SPMI_BOOST_CURRENT_LIMIT_MASK + 1) * 500;
 928
 929         if (type == SPMI_REGULATOR_LOGICAL_TYPE_BOOST)
 930                 current_reg = SPMI_BOOST_REG_CURRENT_LIMIT;
 931         else
 932                 current_reg = SPMI_BOOST_BYP_REG_CURRENT_LIMIT;
 933
 934         if (ilim_uA > max || ilim_uA <= 0)
 935                 return -EINVAL;
 936
 937         reg = (ilim_uA - 1) / 500;
 938         reg |= SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
 939
 940         return spmi_vreg_update_bits(vreg, current_reg, reg, mask);
 941 }
 942
 943 static int spmi_regulator_vs_clear_ocp(struct spmi_regulator *vreg)
 944 {
 945         int ret;
 946
 947         ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
 948                 SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
 949
 950         vreg->vs_enable_time = ktime_get();
 951
 952         ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
 953                 SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
 954
 955         return ret;
 956 }
 957
 958 static void spmi_regulator_vs_ocp_work(struct work_struct *work)
 959 {
 960         struct delayed_work *dwork = to_delayed_work(work);
 961         struct spmi_regulator *vreg
 962                 = container_of(dwork, struct spmi_regulator, ocp_work);
 963
 964         spmi_regulator_vs_clear_ocp(vreg);
 965 }
 966
 967 static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
 968 {
 969         struct spmi_regulator *vreg = data;
 970         ktime_t ocp_irq_time;
 971         s64 ocp_trigger_delay_us;
 972
 973         ocp_irq_time = ktime_get();
 974         ocp_trigger_delay_us = ktime_us_delta(ocp_irq_time,
 975                                                 vreg->vs_enable_time);
 976
 977         /*
 978          * Reset the OCP count if there is a large delay between switch enable
 979          * and when OCP triggers.  This is indicative of a hotplug event as
 980          * opposed to a fault.
 981          */
 982         if (ocp_trigger_delay_us > SPMI_VS_OCP_FAULT_DELAY_US)
 983                 vreg->ocp_count = 0;
 984
 985         /* Wait for switch output to settle back to 0 V after OCP triggered. */
 986         udelay(SPMI_VS_OCP_FALL_DELAY_US);
 987
 988         vreg->ocp_count++;
 989
 990         if (vreg->ocp_count == 1) {
 991                 /* Immediately clear the over current condition. */
 992                 spmi_regulator_vs_clear_ocp(vreg);
 993         } else if (vreg->ocp_count <= vreg->ocp_max_retries) {
 994                 /* Schedule the over current clear task to run later. */
 995                 schedule_delayed_work(&vreg->ocp_work,
 996                         msecs_to_jiffies(vreg->ocp_retry_delay_ms) + 1);
 997         } else {
 998                 dev_err(vreg->dev,
 999                         "OCP triggered %d times; no further retries\n",
1000                         vreg->ocp_count);
1001         }
1002
1003         return IRQ_HANDLED;
1004 }
1005
1006 static struct regulator_ops spmi_smps_ops = {
1007         .enable                 = spmi_regulator_common_enable,
1008         .disable                = spmi_regulator_common_disable,
1009         .is_enabled             = spmi_regulator_common_is_enabled,
1010         .set_voltage            = spmi_regulator_common_set_voltage,
1011         .get_voltage            = spmi_regulator_common_get_voltage,
1012         .list_voltage           = spmi_regulator_common_list_voltage,
1013         .set_mode               = spmi_regulator_common_set_mode,
1014         .get_mode               = spmi_regulator_common_get_mode,
1015         .set_load               = spmi_regulator_common_set_load,
1016         .set_pull_down          = spmi_regulator_common_set_pull_down,
1017 };
1018
1019 static struct regulator_ops spmi_ldo_ops = {
1020         .enable                 = spmi_regulator_common_enable,
1021         .disable                = spmi_regulator_common_disable,
1022         .is_enabled             = spmi_regulator_common_is_enabled,
1023         .set_voltage            = spmi_regulator_common_set_voltage,
1024         .get_voltage            = spmi_regulator_common_get_voltage,
1025         .list_voltage           = spmi_regulator_common_list_voltage,
1026         .set_mode               = spmi_regulator_common_set_mode,
1027         .get_mode               = spmi_regulator_common_get_mode,
1028         .set_load               = spmi_regulator_common_set_load,
1029         .set_bypass             = spmi_regulator_common_set_bypass,
1030         .get_bypass             = spmi_regulator_common_get_bypass,
1031         .set_pull_down          = spmi_regulator_common_set_pull_down,
1032         .set_soft_start         = spmi_regulator_common_set_soft_start,
1033 };
1034
1035 static struct regulator_ops spmi_ln_ldo_ops = {
1036         .enable                 = spmi_regulator_common_enable,
1037         .disable                = spmi_regulator_common_disable,
1038         .is_enabled             = spmi_regulator_common_is_enabled,
1039         .set_voltage            = spmi_regulator_common_set_voltage,
1040         .get_voltage            = spmi_regulator_common_get_voltage,
1041         .list_voltage           = spmi_regulator_common_list_voltage,
1042         .set_bypass             = spmi_regulator_common_set_bypass,
1043         .get_bypass             = spmi_regulator_common_get_bypass,
1044 };
1045
1046 static struct regulator_ops spmi_vs_ops = {
1047         .enable                 = spmi_regulator_vs_enable,
1048         .disable                = spmi_regulator_common_disable,
1049         .is_enabled             = spmi_regulator_common_is_enabled,
1050         .set_pull_down          = spmi_regulator_common_set_pull_down,
1051         .set_soft_start         = spmi_regulator_common_set_soft_start,
1052         .set_over_current_protection = spmi_regulator_vs_ocp,
1053         .set_mode               = spmi_regulator_common_set_mode,
1054         .get_mode               = spmi_regulator_common_get_mode,
1055 };
1056
1057 static struct regulator_ops spmi_boost_ops = {
1058         .enable                 = spmi_regulator_common_enable,
1059         .disable                = spmi_regulator_common_disable,
1060         .is_enabled             = spmi_regulator_common_is_enabled,
1061         .set_voltage            = spmi_regulator_single_range_set_voltage,
1062         .get_voltage            = spmi_regulator_single_range_get_voltage,
1063         .list_voltage           = spmi_regulator_common_list_voltage,
1064         .set_input_current_limit = spmi_regulator_set_ilim,
1065 };
1066
1067 static struct regulator_ops spmi_ftsmps_ops = {
1068         .enable                 = spmi_regulator_common_enable,
1069         .disable                = spmi_regulator_common_disable,
1070         .is_enabled             = spmi_regulator_common_is_enabled,
1071         .set_voltage            = spmi_regulator_common_set_voltage,
1072         .set_voltage_time_sel   = spmi_regulator_set_voltage_time_sel,
1073         .get_voltage            = spmi_regulator_common_get_voltage,
1074         .list_voltage           = spmi_regulator_common_list_voltage,
1075         .set_mode               = spmi_regulator_common_set_mode,
1076         .get_mode               = spmi_regulator_common_get_mode,
1077         .set_load               = spmi_regulator_common_set_load,
1078         .set_pull_down          = spmi_regulator_common_set_pull_down,
1079 };
1080
1081 static struct regulator_ops spmi_ult_lo_smps_ops = {
1082         .enable                 = spmi_regulator_common_enable,
1083         .disable                = spmi_regulator_common_disable,
1084         .is_enabled             = spmi_regulator_common_is_enabled,
1085         .set_voltage            = spmi_regulator_ult_lo_smps_set_voltage,
1086         .get_voltage            = spmi_regulator_ult_lo_smps_get_voltage,
1087         .list_voltage           = spmi_regulator_common_list_voltage,
1088         .set_mode               = spmi_regulator_common_set_mode,
1089         .get_mode               = spmi_regulator_common_get_mode,
1090         .set_load               = spmi_regulator_common_set_load,
1091         .set_pull_down          = spmi_regulator_common_set_pull_down,
1092 };
1093
1094 static struct regulator_ops spmi_ult_ho_smps_ops = {
1095         .enable                 = spmi_regulator_common_enable,
1096         .disable                = spmi_regulator_common_disable,
1097         .is_enabled             = spmi_regulator_common_is_enabled,
1098         .set_voltage            = spmi_regulator_single_range_set_voltage,
1099         .get_voltage            = spmi_regulator_single_range_get_voltage,
1100         .list_voltage           = spmi_regulator_common_list_voltage,
1101         .set_mode               = spmi_regulator_common_set_mode,
1102         .get_mode               = spmi_regulator_common_get_mode,
1103         .set_load               = spmi_regulator_common_set_load,
1104         .set_pull_down          = spmi_regulator_common_set_pull_down,
1105 };
1106
1107 static struct regulator_ops spmi_ult_ldo_ops = {
1108         .enable                 = spmi_regulator_common_enable,
1109         .disable                = spmi_regulator_common_disable,
1110         .is_enabled             = spmi_regulator_common_is_enabled,
1111         .set_voltage            = spmi_regulator_single_range_set_voltage,
1112         .get_voltage            = spmi_regulator_single_range_get_voltage,
1113         .list_voltage           = spmi_regulator_common_list_voltage,
1114         .set_mode               = spmi_regulator_common_set_mode,
1115         .get_mode               = spmi_regulator_common_get_mode,
1116         .set_load               = spmi_regulator_common_set_load,
1117         .set_bypass             = spmi_regulator_common_set_bypass,
1118         .get_bypass             = spmi_regulator_common_get_bypass,
1119         .set_pull_down          = spmi_regulator_common_set_pull_down,
1120         .set_soft_start         = spmi_regulator_common_set_soft_start,
1121 };
1122
1123 /* Maximum possible digital major revision value */
1124 #define INF 0xFF
1125
1126 static const struct spmi_regulator_mapping supported_regulators[] = {
1127         /*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
1128         SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
1129         SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
1130         SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
1131         SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
1132         SPMI_VREG(LDO,   N600,     1, INF, LDO,    ldo,    nldo3,   10000),
1133         SPMI_VREG(LDO,   N1200,    1, INF, LDO,    ldo,    nldo3,   10000),
1134         SPMI_VREG(LDO,   N600_ST,  0,   0, LDO,    ldo,    nldo2,   10000),
1135         SPMI_VREG(LDO,   N1200_ST, 0,   0, LDO,    ldo,    nldo2,   10000),
1136         SPMI_VREG(LDO,   N600_ST,  1, INF, LDO,    ldo,    nldo3,   10000),
1137         SPMI_VREG(LDO,   N1200_ST, 1, INF, LDO,    ldo,    nldo3,   10000),
1138         SPMI_VREG(LDO,   P50,      0, INF, LDO,    ldo,    pldo,     5000),
1139         SPMI_VREG(LDO,   P150,     0, INF, LDO,    ldo,    pldo,    10000),
1140         SPMI_VREG(LDO,   P300,     0, INF, LDO,    ldo,    pldo,    10000),
1141         SPMI_VREG(LDO,   P600,     0, INF, LDO,    ldo,    pldo,    10000),
1142         SPMI_VREG(LDO,   P1200,    0, INF, LDO,    ldo,    pldo,    10000),
1143         SPMI_VREG(LDO,   LN,       0, INF, LN_LDO, ln_ldo, ln_ldo,      0),
1144         SPMI_VREG(LDO,   LV_P50,   0, INF, LDO,    ldo,    pldo,     5000),
1145         SPMI_VREG(LDO,   LV_P150,  0, INF, LDO,    ldo,    pldo,    10000),
1146         SPMI_VREG(LDO,   LV_P300,  0, INF, LDO,    ldo,    pldo,    10000),
1147         SPMI_VREG(LDO,   LV_P600,  0, INF, LDO,    ldo,    pldo,    10000),
1148         SPMI_VREG(LDO,   LV_P1200, 0, INF, LDO,    ldo,    pldo,    10000),
1149         SPMI_VREG_VS(LV100,        0, INF),
1150         SPMI_VREG_VS(LV300,        0, INF),
1151         SPMI_VREG_VS(MV300,        0, INF),
1152         SPMI_VREG_VS(MV500,        0, INF),
1153         SPMI_VREG_VS(HDMI,         0, INF),
1154         SPMI_VREG_VS(OTG,          0, INF),
1155         SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST,  boost,  boost,       0),
1156         SPMI_VREG(FTS,   FTS_CTL,  0, INF, FTSMPS, ftsmps, ftsmps, 100000),
1157         SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000),
1158         SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0),
1159         SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps,
1160                                                 ult_lo_smps,   100000),
1161         SPMI_VREG(ULT_BUCK, ULT_HF_CTL2, 0, INF, ULT_LO_SMPS, ult_lo_smps,
1162                                                 ult_lo_smps,   100000),
1163         SPMI_VREG(ULT_BUCK, ULT_HF_CTL3, 0, INF, ULT_LO_SMPS, ult_lo_smps,
1164                                                 ult_lo_smps,   100000),
1165         SPMI_VREG(ULT_BUCK, ULT_HF_CTL4, 0, INF, ULT_HO_SMPS, ult_ho_smps,
1166                                                 ult_ho_smps,   100000),
1167         SPMI_VREG(ULT_LDO, N300_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1168         SPMI_VREG(ULT_LDO, N600_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1169         SPMI_VREG(ULT_LDO, N900_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1170         SPMI_VREG(ULT_LDO, N1200_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1171         SPMI_VREG(ULT_LDO, LV_P150,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1172         SPMI_VREG(ULT_LDO, LV_P300,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1173         SPMI_VREG(ULT_LDO, LV_P450,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1174         SPMI_VREG(ULT_LDO, P600,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1175         SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1176         SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
1177 };
1178
1179 static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
1180 {
1181         unsigned int n;
1182         struct spmi_voltage_range *range = points->range;
1183
1184         for (; range < points->range + points->count; range++) {
1185                 n = 0;
1186                 if (range->set_point_max_uV) {
1187                         n = range->set_point_max_uV - range->set_point_min_uV;
1188                         n = (n / range->step_uV) + 1;
1189                 }
1190                 range->n_voltages = n;
1191                 points->n_voltages += n;
1192         }
1193 }
1194
1195 static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type)
1196 {
1197         const struct spmi_regulator_mapping *mapping;
1198         int ret, i;
1199         u32 dig_major_rev;
1200         u8 version[SPMI_COMMON_REG_SUBTYPE - SPMI_COMMON_REG_DIG_MAJOR_REV + 1];
1201         u8 type, subtype;
1202
1203         ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_DIG_MAJOR_REV, version,
1204                 ARRAY_SIZE(version));
1205         if (ret) {
1206                 dev_err(vreg->dev, "could not read version registers\n");
1207                 return ret;
1208         }
1209         dig_major_rev   = version[SPMI_COMMON_REG_DIG_MAJOR_REV
1210                                         - SPMI_COMMON_REG_DIG_MAJOR_REV];
1211         if (!force_type) {
1212                 type            = version[SPMI_COMMON_REG_TYPE -
1213                                           SPMI_COMMON_REG_DIG_MAJOR_REV];
1214                 subtype         = version[SPMI_COMMON_REG_SUBTYPE -
1215                                           SPMI_COMMON_REG_DIG_MAJOR_REV];
1216         } else {
1217                 type = force_type >> 8;
1218                 subtype = force_type;
1219         }
1220
1221         for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
1222                 mapping = &supported_regulators[i];
1223                 if (mapping->type == type && mapping->subtype == subtype
1224                     && mapping->revision_min <= dig_major_rev
1225                     && mapping->revision_max >= dig_major_rev)
1226                         goto found;
1227         }
1228
1229         dev_err(vreg->dev,
1230                 "unsupported regulator: name=%s type=0x%02X, subtype=0x%02X, dig major rev=0x%02X\n",
1231                 vreg->desc.name, type, subtype, dig_major_rev);
1232
1233         return -ENODEV;
1234
1235 found:
1236         vreg->logical_type      = mapping->logical_type;
1237         vreg->set_points        = mapping->set_points;
1238         vreg->hpm_min_load      = mapping->hpm_min_load;
1239         vreg->desc.ops          = mapping->ops;
1240
1241         if (mapping->set_points) {
1242                 if (!mapping->set_points->n_voltages)
1243                         spmi_calculate_num_voltages(mapping->set_points);
1244                 vreg->desc.n_voltages = mapping->set_points->n_voltages;
1245         }
1246
1247         return 0;
1248 }
1249
1250 static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
1251 {
1252         int ret;
1253         u8 reg = 0;
1254         int step, delay, slew_rate;
1255         const struct spmi_voltage_range *range;
1256
1257         ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, &reg, 1);
1258         if (ret) {
1259                 dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
1260                 return ret;
1261         }
1262
1263         range = spmi_regulator_find_range(vreg);
1264         if (!range)
1265                 return -EINVAL;
1266
1267         step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
1268         step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
1269
1270         delay = reg & SPMI_FTSMPS_STEP_CTRL_DELAY_MASK;
1271         delay >>= SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT;
1272
1273         /* slew_rate has units of uV/us */
1274         slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
1275         slew_rate /= 1000 * (SPMI_FTSMPS_STEP_DELAY << delay);
1276         slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
1277         slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
1278
1279         /* Ensure that the slew rate is greater than 0 */
1280         vreg->slew_rate = max(slew_rate, 1);
1281
1282         return ret;
1283 }
1284
1285 static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
1286                                 const struct spmi_regulator_init_data *data)
1287 {
1288         int ret;
1289         enum spmi_regulator_logical_type type;
1290         u8 ctrl_reg[8], reg, mask;
1291
1292         type = vreg->logical_type;
1293
1294         ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
1295         if (ret)
1296                 return ret;
1297
1298         /* Set up enable pin control. */
1299         if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
1300              || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO
1301              || type == SPMI_REGULATOR_LOGICAL_TYPE_VS)
1302             && !(data->pin_ctrl_enable
1303                         & SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) {
1304                 ctrl_reg[SPMI_COMMON_IDX_ENABLE] &=
1305                         ~SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
1306                 ctrl_reg[SPMI_COMMON_IDX_ENABLE] |=
1307                     data->pin_ctrl_enable & SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
1308         }
1309
1310         /* Set up mode pin control. */
1311         if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
1312             || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO)
1313                 && !(data->pin_ctrl_hpm
1314                         & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
1315                 ctrl_reg[SPMI_COMMON_IDX_MODE] &=
1316                         ~SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
1317                 ctrl_reg[SPMI_COMMON_IDX_MODE] |=
1318                         data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
1319         }
1320
1321         if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS
1322            && !(data->pin_ctrl_hpm & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
1323                 ctrl_reg[SPMI_COMMON_IDX_MODE] &=
1324                         ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1325                 ctrl_reg[SPMI_COMMON_IDX_MODE] |=
1326                        data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1327         }
1328
1329         if ((type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS
1330                 || type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS
1331                 || type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO)
1332                 && !(data->pin_ctrl_hpm
1333                         & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
1334                 ctrl_reg[SPMI_COMMON_IDX_MODE] &=
1335                         ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1336                 ctrl_reg[SPMI_COMMON_IDX_MODE] |=
1337                        data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1338         }
1339
1340         /* Write back any control register values that were modified. */
1341         ret = spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
1342         if (ret)
1343                 return ret;
1344
1345         /* Set soft start strength and over current protection for VS. */
1346         if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS) {
1347                 if (data->vs_soft_start_strength
1348                                 != SPMI_VS_SOFT_START_STR_HW_DEFAULT) {
1349                         reg = data->vs_soft_start_strength
1350                                 & SPMI_VS_SOFT_START_SEL_MASK;
1351                         mask = SPMI_VS_SOFT_START_SEL_MASK;
1352                         return spmi_vreg_update_bits(vreg,
1353                                                      SPMI_VS_REG_SOFT_START,
1354                                                      reg, mask);
1355                 }
1356         }
1357
1358         return 0;
1359 }
1360
1361 static void spmi_regulator_get_dt_config(struct spmi_regulator *vreg,
1362                 struct device_node *node, struct spmi_regulator_init_data *data)
1363 {
1364         /*
1365          * Initialize configuration parameters to use hardware default in case
1366          * no value is specified via device tree.
1367          */
1368         data->pin_ctrl_enable       = SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT;
1369         data->pin_ctrl_hpm          = SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT;
1370         data->vs_soft_start_strength    = SPMI_VS_SOFT_START_STR_HW_DEFAULT;
1371
1372         /* These bindings are optional, so it is okay if they aren't found. */
1373         of_property_read_u32(node, "qcom,ocp-max-retries",
1374                 &vreg->ocp_max_retries);
1375         of_property_read_u32(node, "qcom,ocp-retry-delay",
1376                 &vreg->ocp_retry_delay_ms);
1377         of_property_read_u32(node, "qcom,pin-ctrl-enable",
1378                 &data->pin_ctrl_enable);
1379         of_property_read_u32(node, "qcom,pin-ctrl-hpm", &data->pin_ctrl_hpm);
1380         of_property_read_u32(node, "qcom,vs-soft-start-strength",
1381                 &data->vs_soft_start_strength);
1382 }
1383
1384 static unsigned int spmi_regulator_of_map_mode(unsigned int mode)
1385 {
1386         if (mode == 1)
1387                 return REGULATOR_MODE_NORMAL;
1388         if (mode == 2)
1389                 return REGULATOR_MODE_FAST;
1390
1391         return REGULATOR_MODE_IDLE;
1392 }
1393
1394 static int spmi_regulator_of_parse(struct device_node *node,
1395                             const struct regulator_desc *desc,
1396                             struct regulator_config *config)
1397 {
1398         struct spmi_regulator_init_data data = { };
1399         struct spmi_regulator *vreg = config->driver_data;
1400         struct device *dev = config->dev;
1401         int ret;
1402
1403         spmi_regulator_get_dt_config(vreg, node, &data);
1404
1405         if (!vreg->ocp_max_retries)
1406                 vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
1407         if (!vreg->ocp_retry_delay_ms)
1408                 vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
1409
1410         ret = spmi_regulator_init_registers(vreg, &data);
1411         if (ret) {
1412                 dev_err(dev, "common initialization failed, ret=%d\n", ret);
1413                 return ret;
1414         }
1415
1416         if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS) {
1417                 ret = spmi_regulator_ftsmps_init_slew_rate(vreg);
1418                 if (ret)
1419                         return ret;
1420         }
1421
1422         if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_VS)
1423                 vreg->ocp_irq = 0;
1424
1425         if (vreg->ocp_irq) {
1426                 ret = devm_request_irq(dev, vreg->ocp_irq,
1427                         spmi_regulator_vs_ocp_isr, IRQF_TRIGGER_RISING, "ocp",
1428                         vreg);
1429                 if (ret < 0) {
1430                         dev_err(dev, "failed to request irq %d, ret=%d\n",
1431                                 vreg->ocp_irq, ret);
1432                         return ret;
1433                 }
1434
1435                 INIT_DELAYED_WORK(&vreg->ocp_work, spmi_regulator_vs_ocp_work);
1436         }
1437
1438         return 0;
1439 }
1440
1441 static const struct spmi_regulator_data pm8941_regulators[] = {
1442         { "s1", 0x1400, "vdd_s1", },
1443         { "s2", 0x1700, "vdd_s2", },
1444         { "s3", 0x1a00, "vdd_s3", },
1445         { "s4", 0xa000, },
1446         { "l1", 0x4000, "vdd_l1_l3", },
1447         { "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
1448         { "l3", 0x4200, "vdd_l1_l3", },
1449         { "l4", 0x4300, "vdd_l4_l11", },
1450         { "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
1451         { "l6", 0x4500, "vdd_l6_l12_l14_l15", },
1452         { "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
1453         { "l8", 0x4700, "vdd_l8_l16_l18_19", },
1454         { "l9", 0x4800, "vdd_l9_l10_l17_l22", },
1455         { "l10", 0x4900, "vdd_l9_l10_l17_l22", },
1456         { "l11", 0x4a00, "vdd_l4_l11", },
1457         { "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
1458         { "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
1459         { "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
1460         { "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
1461         { "l16", 0x4f00, "vdd_l8_l16_l18_19", },
1462         { "l17", 0x5000, "vdd_l9_l10_l17_l22", },
1463         { "l18", 0x5100, "vdd_l8_l16_l18_19", },
1464         { "l19", 0x5200, "vdd_l8_l16_l18_19", },
1465         { "l20", 0x5300, "vdd_l13_l20_l23_l24", },
1466         { "l21", 0x5400, "vdd_l21", },
1467         { "l22", 0x5500, "vdd_l9_l10_l17_l22", },
1468         { "l23", 0x5600, "vdd_l13_l20_l23_l24", },
1469         { "l24", 0x5700, "vdd_l13_l20_l23_l24", },
1470         { "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
1471         { "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
1472         { "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
1473         { "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
1474         { "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
1475         { }
1476 };
1477
1478 static const struct spmi_regulator_data pm8841_regulators[] = {
1479         { "s1", 0x1400, "vdd_s1", },
1480         { "s2", 0x1700, "vdd_s2", NULL, 0x1c08 },
1481         { "s3", 0x1a00, "vdd_s3", },
1482         { "s4", 0x1d00, "vdd_s4", NULL, 0x1c08 },
1483         { "s5", 0x2000, "vdd_s5", NULL, 0x1c08 },
1484         { "s6", 0x2300, "vdd_s6", NULL, 0x1c08 },
1485         { "s7", 0x2600, "vdd_s7", NULL, 0x1c08 },
1486         { "s8", 0x2900, "vdd_s8", NULL, 0x1c08 },
1487         { }
1488 };
1489
1490 static const struct spmi_regulator_data pm8916_regulators[] = {
1491         { "s1", 0x1400, "vdd_s1", },
1492         { "s2", 0x1700, "vdd_s2", },
1493         { "s3", 0x1a00, "vdd_s3", },
1494         { "s4", 0x1d00, "vdd_s4", },
1495         { "l1", 0x4000, "vdd_l1_l3", },
1496         { "l2", 0x4100, "vdd_l2", },
1497         { "l3", 0x4200, "vdd_l1_l3", },
1498         { "l4", 0x4300, "vdd_l4_l5_l6", },
1499         { "l5", 0x4400, "vdd_l4_l5_l6", },
1500         { "l6", 0x4500, "vdd_l4_l5_l6", },
1501         { "l7", 0x4600, "vdd_l7", },
1502         { "l8", 0x4700, "vdd_l8_l11_l14_l15_l16", },
1503         { "l9", 0x4800, "vdd_l9_l10_l12_l13_l17_l18", },
1504         { "l10", 0x4900, "vdd_l9_l10_l12_l13_l17_l18", },
1505         { "l11", 0x4a00, "vdd_l8_l11_l14_l15_l16", },
1506         { "l12", 0x4b00, "vdd_l9_l10_l12_l13_l17_l18", },
1507         { "l13", 0x4c00, "vdd_l9_l10_l12_l13_l17_l18", },
1508         { "l14", 0x4d00, "vdd_l8_l11_l14_l15_l16", },
1509         { "l15", 0x4e00, "vdd_l8_l11_l14_l15_l16", },
1510         { "l16", 0x4f00, "vdd_l8_l11_l14_l15_l16", },
1511         { "l17", 0x5000, "vdd_l9_l10_l12_l13_l17_l18", },
1512         { "l18", 0x5100, "vdd_l9_l10_l12_l13_l17_l18", },
1513         { }
1514 };
1515
1516 static const struct of_device_id qcom_spmi_regulator_match[] = {
1517         { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
1518         { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
1519         { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
1520         { }
1521 };
1522 MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
1523
1524 static int qcom_spmi_regulator_probe(struct platform_device *pdev)
1525 {
1526         const struct spmi_regulator_data *reg;
1527         const struct of_device_id *match;
1528         struct regulator_config config = { };
1529         struct regulator_dev *rdev;
1530         struct spmi_regulator *vreg;
1531         struct regmap *regmap;
1532         const char *name;
1533         struct device *dev = &pdev->dev;
1534         int ret;
1535         struct list_head *vreg_list;
1536
1537         vreg_list = devm_kzalloc(dev, sizeof(*vreg_list), GFP_KERNEL);
1538         if (!vreg_list)
1539                 return -ENOMEM;
1540         INIT_LIST_HEAD(vreg_list);
1541         platform_set_drvdata(pdev, vreg_list);
1542
1543         regmap = dev_get_regmap(dev->parent, NULL);
1544         if (!regmap)
1545                 return -ENODEV;
1546
1547         match = of_match_device(qcom_spmi_regulator_match, &pdev->dev);
1548         if (!match)
1549                 return -ENODEV;
1550
1551         for (reg = match->data; reg->name; reg++) {
1552                 vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
1553                 if (!vreg)
1554                         return -ENOMEM;
1555
1556                 vreg->dev = dev;
1557                 vreg->base = reg->base;
1558                 vreg->regmap = regmap;
1559
1560                 if (reg->ocp) {
1561                         vreg->ocp_irq = platform_get_irq_byname(pdev, reg->ocp);
1562                         if (vreg->ocp_irq < 0) {
1563                                 ret = vreg->ocp_irq;
1564                                 goto err;
1565                         }
1566                 }
1567
1568                 vreg->desc.id = -1;
1569                 vreg->desc.owner = THIS_MODULE;
1570                 vreg->desc.type = REGULATOR_VOLTAGE;
1571                 vreg->desc.name = name = reg->name;
1572                 vreg->desc.supply_name = reg->supply;
1573                 vreg->desc.of_match = reg->name;
1574                 vreg->desc.of_parse_cb = spmi_regulator_of_parse;
1575                 vreg->desc.of_map_mode = spmi_regulator_of_map_mode;
1576
1577                 ret = spmi_regulator_match(vreg, reg->force_type);
1578                 if (ret)
1579                         goto err;
1580
1581                 config.dev = dev;
1582                 config.driver_data = vreg;
1583                 rdev = devm_regulator_register(dev, &vreg->desc, &config);
1584                 if (IS_ERR(rdev)) {
1585                         dev_err(dev, "failed to register %s\n", name);
1586                         ret = PTR_ERR(rdev);
1587                         goto err;
1588                 }
1589
1590                 INIT_LIST_HEAD(&vreg->node);
1591                 list_add(&vreg->node, vreg_list);
1592         }
1593
1594         return 0;
1595
1596 err:
1597         list_for_each_entry(vreg, vreg_list, node)
1598                 if (vreg->ocp_irq)
1599                         cancel_delayed_work_sync(&vreg->ocp_work);
1600         return ret;
1601 }
1602
1603 static int qcom_spmi_regulator_remove(struct platform_device *pdev)
1604 {
1605         struct spmi_regulator *vreg;
1606         struct list_head *vreg_list = platform_get_drvdata(pdev);
1607
1608         list_for_each_entry(vreg, vreg_list, node)
1609                 if (vreg->ocp_irq)
1610                         cancel_delayed_work_sync(&vreg->ocp_work);
1611
1612         return 0;
1613 }
1614
1615 static struct platform_driver qcom_spmi_regulator_driver = {
1616         .driver         = {
1617                 .name   = "qcom-spmi-regulator",
1618                 .of_match_table = qcom_spmi_regulator_match,
1619         },
1620         .probe          = qcom_spmi_regulator_probe,
1621         .remove         = qcom_spmi_regulator_remove,
1622 };
1623 module_platform_driver(qcom_spmi_regulator_driver);
1624
1625 MODULE_DESCRIPTION("Qualcomm SPMI PMIC regulator driver");
1626 MODULE_LICENSE("GPL v2");
1627 MODULE_ALIAS("platform:qcom-spmi-regulator");