5 * IBM Hot Plug Controller Driver
7 * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
9 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
10 * Copyright (C) 2001-2003 IBM Corp.
12 * All rights reserved.
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or (at
17 * your option) any later version.
19 * This program is distributed in the hope that it will be useful, but
20 * WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
22 * NON INFRINGEMENT. See the GNU General Public License for more
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 * Send feedback to <gregkh@us.ibm.com>
33 #include <linux/pci_hotplug.h>
35 extern int ibmphp_debug;
38 #define MY_NAME "ibmphpd"
40 #define MY_NAME THIS_MODULE->name
42 #define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
43 #define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
44 #define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
45 #define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
46 #define warn(format, arg...) printk(KERN_WARNING "%s: " format , MY_NAME , ## arg)
51 /***********************************************************
53 ***********************************************************/
55 #define EBDA_SLOT_133_MAX 0x20
56 #define EBDA_SLOT_100_MAX 0x10
57 #define EBDA_SLOT_66_MAX 0x02
58 #define EBDA_SLOT_PCIX_CAP 0x08
61 /************************************************************
63 ************************************************************/
65 #define EBDA_RSRC_TYPE_MASK 0x03
66 #define EBDA_IO_RSRC_TYPE 0x00
67 #define EBDA_MEM_RSRC_TYPE 0x01
68 #define EBDA_PFM_RSRC_TYPE 0x03
69 #define EBDA_RES_RSRC_TYPE 0x02
72 /*************************************************************
73 * IO RESTRICTION TYPE *
74 *************************************************************/
76 #define EBDA_IO_RESTRI_MASK 0x0c
77 #define EBDA_NO_RESTRI 0x00
78 #define EBDA_AVO_VGA_ADDR 0x04
79 #define EBDA_AVO_VGA_ADDR_AND_ALIA 0x08
80 #define EBDA_AVO_ISA_ADDR 0x0c
83 /**************************************************************
85 **************************************************************/
87 #define EBDA_DEV_TYPE_MASK 0x10
88 #define EBDA_PCI_DEV 0x10
89 #define EBDA_NON_PCI_DEV 0x00
92 /***************************************************************
93 * PRIMARY DEF DEFINITION *
94 ***************************************************************/
96 #define EBDA_PRI_DEF_MASK 0x20
97 #define EBDA_PRI_PCI_BUS_INFO 0x20
98 #define EBDA_NORM_DEV_RSRC_INFO 0x00
101 //--------------------------------------------------------------
102 // RIO TABLE DATA STRUCTURE
103 //--------------------------------------------------------------
105 struct rio_table_hdr {
112 //-------------------------------------------------------------
113 // SCALABILITY DETAIL
114 //-------------------------------------------------------------
119 u8 port0_node_connect;
120 u8 port0_port_connect;
121 u8 port1_node_connect;
122 u8 port1_port_connect;
123 u8 port2_node_connect;
124 u8 port2_port_connect;
126 // struct list_head scal_detail_list;
129 //--------------------------------------------------------------
131 //--------------------------------------------------------------
138 u8 port0_node_connect;
139 u8 port0_port_connect;
140 u8 port1_node_connect;
141 u8 port1_port_connect;
146 struct list_head rio_detail_list;
154 struct list_head opt_rio_list;
163 struct list_head opt_rio_lo_list;
166 /****************************************************************
167 * HPC DESCRIPTOR NODE *
168 ****************************************************************/
170 struct ebda_hpc_list {
174 // struct list_head ebda_hpc_list;
176 /*****************************************************************
177 * IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
179 *****************************************************************/
181 struct ebda_hpc_slot {
188 struct ebda_hpc_bus {
193 u8 slots_at_100_pcix;
194 u8 slots_at_133_pcix;
198 /********************************************************************
199 * THREE TYPE OF HOT PLUG CONTROLLER *
200 ********************************************************************/
202 struct isa_ctlr_access {
207 struct pci_ctlr_access {
212 struct wpeg_i2c_ctlr_access {
217 #define HPC_DEVICE_ID 0x0246
218 #define HPC_SUBSYSTEM_ID 0x0247
219 #define HPC_PCI_OFFSET 0x40
220 /*************************************************************************
221 * RSTC DESCRIPTOR NODE *
222 *************************************************************************/
224 struct ebda_rsrc_list {
228 struct ebda_rsrc_list *next;
232 /***************************************************************************
234 ***************************************************************************/
236 struct ebda_pci_rsrc {
242 u8 marked; /* for NVRAM */
243 struct list_head ebda_pci_rsrc_list;
247 /***********************************************************
248 * BUS_INFO DATE STRUCTURE *
249 ***********************************************************/
263 u8 slots_at_100_pcix;
264 u8 slots_at_133_pcix;
265 struct list_head bus_info_list;
269 /***********************************************************
271 ***********************************************************/
272 extern struct list_head ibmphp_ebda_pci_rsrc_head;
273 extern struct list_head ibmphp_slot_head;
274 /***********************************************************
275 * FUNCTION PROTOTYPES *
276 ***********************************************************/
278 void ibmphp_free_ebda_hpc_queue(void);
279 int ibmphp_access_ebda(void);
280 struct slot *ibmphp_get_slot_from_physical_num(u8);
281 int ibmphp_get_total_hp_slots(void);
282 void ibmphp_free_ibm_slot(struct slot *);
283 void ibmphp_free_bus_info_queue(void);
284 void ibmphp_free_ebda_pci_rsrc_queue(void);
285 struct bus_info *ibmphp_find_same_bus_num(u32);
286 int ibmphp_get_bus_index(u8);
287 u16 ibmphp_get_total_controllers(void);
288 int ibmphp_register_pci(void);
290 /* passed parameters */
297 #define IOMASK 0x00 /* will need to take its complement */
300 #define PCIDEVMASK 0x10 /* we should always have PCI devices */
301 #define PRIMARYBUSMASK 0x20
303 /* pci specific defines */
304 #define PCI_VENDOR_ID_NOTVALID 0xFFFF
305 #define PCI_HEADER_TYPE_MULTIDEVICE 0x80
306 #define PCI_HEADER_TYPE_MULTIBRIDGE 0x81
310 #define DEVICEENABLE 0x015F /* CPQ has 0x0157 */
312 #define IOBRIDGE 0x1000 /* 4k */
313 #define MEMBRIDGE 0x100000 /* 1M */
316 #define SCSI_IRQ 0x09
318 #define OTHER_IRQ 0x0B
320 /* Data Structures */
322 /* type is of the form x x xx xx
323 * | | | |_ 00 - I/O, 01 - Memory, 11 - PFMemory
324 * | | - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid
325 * | | VGA and their aliases, 11 - Avoid ISA
326 * | - 1 - PCI device, 0 - non pci device
327 * - 1 - Primary PCI Bus Information (0 if Normal device)
328 * the IO restrictions [2:3] are only for primary buses
332 /* we need this struct because there could be several resource blocks
333 * allocated per primary bus in the EBDA
339 struct range_node *next;
345 struct range_node *rangeIO;
347 struct range_node *rangeMem;
349 struct range_node *rangePFMem;
353 struct resource_node *firstIO; /* first IO resource on the Bus */
354 struct resource_node *firstMem; /* first memory resource on the Bus */
355 struct resource_node *firstPFMem; /* first prefetchable memory resource on the Bus */
356 struct resource_node *firstPFMemFromMem; /* when run out of pfmem available, taking from Mem */
357 struct list_head bus_list;
360 struct resource_node {
367 int type; /* MEM, IO, PFMEM */
368 u8 fromMem; /* this is to indicate that the range is from
369 * from the Memory bucket rather than from PFMem */
370 struct resource_node *next;
371 struct resource_node *nextRange; /* for the other mem range on bus */
378 u8 not_correct; /* needed for return */
379 int devices[32]; /* for device numbers behind this bridge */
384 int ibmphp_rsrc_init(void);
385 int ibmphp_add_resource(struct resource_node *);
386 int ibmphp_remove_resource(struct resource_node *);
387 int ibmphp_find_resource(struct bus_node *, u32, struct resource_node **, int);
388 int ibmphp_check_resource(struct resource_node *, u8);
389 int ibmphp_remove_bus(struct bus_node *, u8);
390 void ibmphp_free_resources(void);
391 int ibmphp_add_pfmem_from_mem(struct resource_node *);
392 struct bus_node *ibmphp_find_res_bus(u8);
393 void ibmphp_print_test(void); /* for debugging purposes */
395 void ibmphp_hpc_initvars(void);
396 int ibmphp_hpc_readslot(struct slot *, u8, u8 *);
397 int ibmphp_hpc_writeslot(struct slot *, u8);
398 void ibmphp_lock_operations(void);
399 void ibmphp_unlock_operations(void);
400 int ibmphp_hpc_start_poll_thread(void);
401 void ibmphp_hpc_stop_poll_thread(void);
403 //----------------------------------------------------------------------------
406 //----------------------------------------------------------------------------
408 //----------------------------------------------------------------------------
409 #define HPC_ERROR 0xFF
411 //-----------------------------------------------------------------------------
413 //-----------------------------------------------------------------------------
414 #define BUS_SPEED 0x30
415 #define BUS_MODE 0x40
416 #define BUS_MODE_PCIX 0x01
417 #define BUS_MODE_PCI 0x00
418 #define BUS_SPEED_2 0x20
419 #define BUS_SPEED_1 0x10
420 #define BUS_SPEED_33 0x00
421 #define BUS_SPEED_66 0x01
422 #define BUS_SPEED_100 0x02
423 #define BUS_SPEED_133 0x03
424 #define BUS_SPEED_66PCIX 0x04
425 #define BUS_SPEED_66UNKNOWN 0x05
426 #define BUS_STATUS_AVAILABLE 0x01
427 #define BUS_CONTROL_AVAILABLE 0x02
428 #define SLOT_LATCH_REGS_SUPPORTED 0x10
430 #define PRGM_MODEL_REV_LEVEL 0xF0
431 #define MAX_ADAPTER_NONE 0x09
433 //----------------------------------------------------------------------------
434 // HPC 'write' operations/commands
435 //----------------------------------------------------------------------------
436 // Command Code State Write to reg
438 //------------------------- ---- ------- ------------
439 #define HPC_CTLR_ENABLEIRQ 0x00 // N 15
440 #define HPC_CTLR_DISABLEIRQ 0x01 // N 15
441 #define HPC_SLOT_OFF 0x02 // Y 0-14
442 #define HPC_SLOT_ON 0x03 // Y 0-14
443 #define HPC_SLOT_ATTNOFF 0x04 // N 0-14
444 #define HPC_SLOT_ATTNON 0x05 // N 0-14
445 #define HPC_CTLR_CLEARIRQ 0x06 // N 15
446 #define HPC_CTLR_RESET 0x07 // Y 15
447 #define HPC_CTLR_IRQSTEER 0x08 // N 15
448 #define HPC_BUS_33CONVMODE 0x09 // Y 31-34
449 #define HPC_BUS_66CONVMODE 0x0A // Y 31-34
450 #define HPC_BUS_66PCIXMODE 0x0B // Y 31-34
451 #define HPC_BUS_100PCIXMODE 0x0C // Y 31-34
452 #define HPC_BUS_133PCIXMODE 0x0D // Y 31-34
453 #define HPC_ALLSLOT_OFF 0x11 // Y 15
454 #define HPC_ALLSLOT_ON 0x12 // Y 15
455 #define HPC_SLOT_BLINKLED 0x13 // N 0-14
457 //----------------------------------------------------------------------------
459 //----------------------------------------------------------------------------
460 #define READ_SLOTSTATUS 0x01
461 #define READ_EXTSLOTSTATUS 0x02
462 #define READ_BUSSTATUS 0x03
463 #define READ_CTLRSTATUS 0x04
464 #define READ_ALLSTAT 0x05
465 #define READ_ALLSLOT 0x06
466 #define READ_SLOTLATCHLOWREG 0x07
467 #define READ_REVLEVEL 0x08
468 #define READ_HPCOPTIONS 0x09
469 //----------------------------------------------------------------------------
471 //----------------------------------------------------------------------------
472 #define HPC_SLOT_POWER 0x01
473 #define HPC_SLOT_CONNECT 0x02
474 #define HPC_SLOT_ATTN 0x04
475 #define HPC_SLOT_PRSNT2 0x08
476 #define HPC_SLOT_PRSNT1 0x10
477 #define HPC_SLOT_PWRGD 0x20
478 #define HPC_SLOT_BUS_SPEED 0x40
479 #define HPC_SLOT_LATCH 0x80
481 //----------------------------------------------------------------------------
482 // HPC_SLOT_POWER status return codes
483 //----------------------------------------------------------------------------
484 #define HPC_SLOT_POWER_OFF 0x00
485 #define HPC_SLOT_POWER_ON 0x01
487 //----------------------------------------------------------------------------
488 // HPC_SLOT_CONNECT status return codes
489 //----------------------------------------------------------------------------
490 #define HPC_SLOT_CONNECTED 0x00
491 #define HPC_SLOT_DISCONNECTED 0x01
493 //----------------------------------------------------------------------------
494 // HPC_SLOT_ATTN status return codes
495 //----------------------------------------------------------------------------
496 #define HPC_SLOT_ATTN_OFF 0x00
497 #define HPC_SLOT_ATTN_ON 0x01
498 #define HPC_SLOT_ATTN_BLINK 0x02
500 //----------------------------------------------------------------------------
501 // HPC_SLOT_PRSNT status return codes
502 //----------------------------------------------------------------------------
503 #define HPC_SLOT_EMPTY 0x00
504 #define HPC_SLOT_PRSNT_7 0x01
505 #define HPC_SLOT_PRSNT_15 0x02
506 #define HPC_SLOT_PRSNT_25 0x03
508 //----------------------------------------------------------------------------
509 // HPC_SLOT_PWRGD status return codes
510 //----------------------------------------------------------------------------
511 #define HPC_SLOT_PWRGD_FAULT_NONE 0x00
512 #define HPC_SLOT_PWRGD_GOOD 0x01
514 //----------------------------------------------------------------------------
515 // HPC_SLOT_BUS_SPEED status return codes
516 //----------------------------------------------------------------------------
517 #define HPC_SLOT_BUS_SPEED_OK 0x00
518 #define HPC_SLOT_BUS_SPEED_MISM 0x01
520 //----------------------------------------------------------------------------
521 // HPC_SLOT_LATCH status return codes
522 //----------------------------------------------------------------------------
523 #define HPC_SLOT_LATCH_OPEN 0x01 // NOTE : in PCI spec bit off = open
524 #define HPC_SLOT_LATCH_CLOSED 0x00 // NOTE : in PCI spec bit on = closed
527 //----------------------------------------------------------------------------
528 // extended slot status
529 //----------------------------------------------------------------------------
530 #define HPC_SLOT_PCIX 0x01
531 #define HPC_SLOT_SPEED1 0x02
532 #define HPC_SLOT_SPEED2 0x04
533 #define HPC_SLOT_BLINK_ATTN 0x08
534 #define HPC_SLOT_RSRVD1 0x10
535 #define HPC_SLOT_RSRVD2 0x20
536 #define HPC_SLOT_BUS_MODE 0x40
537 #define HPC_SLOT_RSRVD3 0x80
539 //----------------------------------------------------------------------------
540 // HPC_XSLOT_PCIX_CAP status return codes
541 //----------------------------------------------------------------------------
542 #define HPC_SLOT_PCIX_NO 0x00
543 #define HPC_SLOT_PCIX_YES 0x01
545 //----------------------------------------------------------------------------
546 // HPC_XSLOT_SPEED status return codes
547 //----------------------------------------------------------------------------
548 #define HPC_SLOT_SPEED_33 0x00
549 #define HPC_SLOT_SPEED_66 0x01
550 #define HPC_SLOT_SPEED_133 0x02
552 //----------------------------------------------------------------------------
553 // HPC_XSLOT_ATTN_BLINK status return codes
554 //----------------------------------------------------------------------------
555 #define HPC_SLOT_ATTN_BLINK_OFF 0x00
556 #define HPC_SLOT_ATTN_BLINK_ON 0x01
558 //----------------------------------------------------------------------------
559 // HPC_XSLOT_BUS_MODE status return codes
560 //----------------------------------------------------------------------------
561 #define HPC_SLOT_BUS_MODE_OK 0x00
562 #define HPC_SLOT_BUS_MODE_MISM 0x01
564 //----------------------------------------------------------------------------
566 //----------------------------------------------------------------------------
567 #define HPC_CTLR_WORKING 0x01
568 #define HPC_CTLR_FINISHED 0x02
569 #define HPC_CTLR_RESULT0 0x04
570 #define HPC_CTLR_RESULT1 0x08
571 #define HPC_CTLR_RESULE2 0x10
572 #define HPC_CTLR_RESULT3 0x20
573 #define HPC_CTLR_IRQ_ROUTG 0x40
574 #define HPC_CTLR_IRQ_PENDG 0x80
576 //----------------------------------------------------------------------------
577 // HPC_CTLR_WORKING status return codes
578 //----------------------------------------------------------------------------
579 #define HPC_CTLR_WORKING_NO 0x00
580 #define HPC_CTLR_WORKING_YES 0x01
582 //----------------------------------------------------------------------------
583 // HPC_CTLR_FINISHED status return codes
584 //----------------------------------------------------------------------------
585 #define HPC_CTLR_FINISHED_NO 0x00
586 #define HPC_CTLR_FINISHED_YES 0x01
588 //----------------------------------------------------------------------------
589 // HPC_CTLR_RESULT status return codes
590 //----------------------------------------------------------------------------
591 #define HPC_CTLR_RESULT_SUCCESS 0x00
592 #define HPC_CTLR_RESULT_FAILED 0x01
593 #define HPC_CTLR_RESULT_RSVD 0x02
594 #define HPC_CTLR_RESULT_NORESP 0x03
597 //----------------------------------------------------------------------------
598 // macro for slot info
599 //----------------------------------------------------------------------------
600 #define SLOT_POWER(s) ((u8) ((s & HPC_SLOT_POWER) \
601 ? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF))
603 #define SLOT_CONNECT(s) ((u8) ((s & HPC_SLOT_CONNECT) \
604 ? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED))
606 #define SLOT_ATTN(s,es) ((u8) ((es & HPC_SLOT_BLINK_ATTN) \
607 ? HPC_SLOT_ATTN_BLINK \
608 : ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF)))
610 #define SLOT_PRESENT(s) ((u8) ((s & HPC_SLOT_PRSNT1) \
611 ? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \
612 : ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7)))
614 #define SLOT_PWRGD(s) ((u8) ((s & HPC_SLOT_PWRGD) \
615 ? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE))
617 #define SLOT_BUS_SPEED(s) ((u8) ((s & HPC_SLOT_BUS_SPEED) \
618 ? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK))
620 #define SLOT_LATCH(s) ((u8) ((s & HPC_SLOT_LATCH) \
621 ? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN))
623 #define SLOT_PCIX(es) ((u8) ((es & HPC_SLOT_PCIX) \
624 ? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO))
626 #define SLOT_SPEED(es) ((u8) ((es & HPC_SLOT_SPEED2) \
627 ? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133 \
628 : HPC_SLOT_SPEED_66) \
629 : HPC_SLOT_SPEED_33))
631 #define SLOT_BUS_MODE(es) ((u8) ((es & HPC_SLOT_BUS_MODE) \
632 ? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK))
634 //--------------------------------------------------------------------------
635 // macro for bus info
636 //---------------------------------------------------------------------------
637 #define CURRENT_BUS_SPEED(s) ((u8) (s & BUS_SPEED_2) \
638 ? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \
639 : ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33))
641 #define CURRENT_BUS_MODE(s) ((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI)
643 #define READ_BUS_STATUS(s) ((u8) (s->options & BUS_STATUS_AVAILABLE))
645 #define READ_BUS_MODE(s) ((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20)
647 #define SET_BUS_STATUS(s) ((u8) (s->options & BUS_CONTROL_AVAILABLE))
649 #define READ_SLOT_LATCH(s) ((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED))
651 //----------------------------------------------------------------------------
652 // macro for controller info
653 //----------------------------------------------------------------------------
654 #define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \
655 ? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO))
656 #define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \
657 ? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO))
658 #define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1) \
659 ? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \
660 : HPC_CTLR_RESULT_RSVD) \
661 : ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \
662 : HPC_CTLR_RESULT_SUCCESS)))
664 // command that affect the state machine of HPC
665 #define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF) || \
666 (c == HPC_SLOT_ON) || \
667 (c == HPC_CTLR_RESET) || \
668 (c == HPC_BUS_33CONVMODE) || \
669 (c == HPC_BUS_66CONVMODE) || \
670 (c == HPC_BUS_66PCIXMODE) || \
671 (c == HPC_BUS_100PCIXMODE) || \
672 (c == HPC_BUS_133PCIXMODE) || \
673 (c == HPC_ALLSLOT_OFF) || \
674 (c == HPC_ALLSLOT_ON))
677 /* Core part of the driver */
682 #define CARD_INFO 0x07
687 extern struct pci_bus *ibmphp_pci_bus;
692 struct pci_dev *dev; /* from the OS */
696 struct resource_node *io[6];
697 struct resource_node *mem[6];
698 struct resource_node *pfmem[6];
699 struct pci_func *next;
700 int devices[32]; /* for bridge config */
701 u8 irq[4]; /* for interrupt config */
702 u8 bus; /* flag for unconfiguring, to say if PPB */
709 u8 real_physical_slot_num;
712 u8 supported_bus_mode;
713 u8 flag; /* this is for disable slot and polling */
715 struct hotplug_slot *hotplug_slot;
716 struct controller *ctrl;
717 struct pci_func *func;
719 int bit_mode; /* 0 = 32, 1 = 64 */
720 struct bus_info *bus_on;
721 struct list_head ibm_slot_list;
728 struct ebda_hpc_slot *slots;
729 struct ebda_hpc_bus *buses;
730 struct pci_dev *ctrl_dev; /* in case where controller is PCI */
731 u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
734 u8 options; /* which options HPC supports */
742 struct isa_ctlr_access isa_ctlr;
743 struct pci_ctlr_access pci_ctlr;
744 struct wpeg_i2c_ctlr_access wpeg_ctlr;
747 struct list_head ebda_hpc_list;
752 int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
753 int ibmphp_do_disable_slot(struct slot *slot_cur);
754 int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be be static */
755 int ibmphp_configure_card(struct pci_func *, u8);
756 int ibmphp_unconfigure_card(struct slot **, int);
757 extern struct hotplug_slot_ops ibmphp_hotplug_slot_ops;