2 * P1023 RDB Device Tree Source
4 * Copyright 2013 - 2014 Freescale Semiconductor Inc.
6 * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * * Neither the name of Freescale Semiconductor nor the
16 * names of its contributors may be used to endorse or promote products
17 * derived from this software without specific prior written permission.
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation, either version 2 of that License or (at your option) any
25 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
26 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
27 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
28 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
29 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
30 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
31 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
32 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 /include/ "fsl/p1023si-pre.dtsi"
41 compatible = "fsl,P1023RDB";
44 interrupt-parent = <&mpic>;
47 device_type = "memory";
55 bman_fbpr: bman-fbpr {
57 alignment = <0 0x1000000>;
61 bportals: bman-portals@ff200000 {
62 ranges = <0x0 0xf 0xff200000 0x200000>;
66 ranges = <0x0 0x0 0xff600000 0x200000>;
70 compatible = "at24,24c04";
75 compatible = "microchip,mcp7941x";
86 lbc: localbus@ff605000 {
87 reg = <0 0xff605000 0 0x1000>;
89 /* NOR, NAND Flashes */
90 ranges = <0x0 0x0 0x0 0xec000000 0x04000000
91 0x1 0x0 0x0 0xffa00000 0x08000000>;
96 compatible = "cfi-flash";
97 reg = <0x0 0x0 0x04000000>;
102 /* 48MB for Root File System */
103 reg = <0x00000000 0x03000000>;
104 label = "NOR Root File System";
108 /* 1MB for DTB Image */
109 reg = <0x03000000 0x00100000>;
110 label = "NOR DTB Image";
114 /* 14MB for Linux Kernel Image */
115 reg = <0x03100000 0x00e00000>;
116 label = "NOR Linux Kernel Image";
120 /* This location must not be altered */
121 /* 512KB for u-boot Bootloader Image */
122 /* 512KB for u-boot Environment Variables */
123 reg = <0x03f00000 0x00100000>;
124 label = "NOR U-Boot Image";
130 #address-cells = <1>;
132 compatible = "fsl,elbc-fcm-nand";
133 reg = <0x1 0x0 0x40000>;
136 /* This location must not be altered */
137 /* 1MB for u-boot Bootloader Image */
138 reg = <0x0 0x00100000>;
139 label = "NAND U-Boot Image";
144 /* 1MB for DTB Image */
145 reg = <0x00100000 0x00100000>;
146 label = "NAND DTB Image";
150 /* 14MB for Linux Kernel Image */
151 reg = <0x00200000 0x00e00000>;
152 label = "NAND Linux Kernel Image";
156 /* 96MB for Root File System Image */
157 reg = <0x01000000 0x06000000>;
158 label = "NAND Root File System";
162 /* 16MB for User Writable Area */
163 reg = <0x07000000 0x01000000>;
164 label = "NAND Writable User area";
169 pci0: pcie@ff60a000 {
170 reg = <0 0xff60a000 0 0x1000>;
171 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
172 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
174 /* IRQ[0:3] are pulled up on board, set to active-low */
175 interrupt-map-mask = <0xf800 0 0 7>;
178 0000 0 0 1 &mpic 0 1 0 0
179 0000 0 0 2 &mpic 1 1 0 0
180 0000 0 0 3 &mpic 2 1 0 0
181 0000 0 0 4 &mpic 3 1 0 0
183 ranges = <0x2000000 0x0 0xc0000000
184 0x2000000 0x0 0xc0000000
193 board_pci1: pci1: pcie@ff609000 {
194 reg = <0 0xff609000 0 0x1000>;
195 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
196 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
199 * IRQ[4:6] only for PCIe, set to active-high,
200 * IRQ[7] is pulled up on board, set to active-low
202 interrupt-map-mask = <0xf800 0 0 7>;
205 0000 0 0 1 &mpic 4 2 0 0
206 0000 0 0 2 &mpic 5 2 0 0
207 0000 0 0 3 &mpic 6 2 0 0
208 0000 0 0 4 &mpic 7 1 0 0
210 ranges = <0x2000000 0x0 0xa0000000
211 0x2000000 0x0 0xa0000000
220 pci2: pcie@ff60b000 {
221 reg = <0 0xff60b000 0 0x1000>;
222 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
223 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
226 * IRQ[8:10] are pulled up on board, set to active-low
227 * IRQ[11] only for PCIe, set to active-high,
229 interrupt-map-mask = <0xf800 0 0 7>;
232 0000 0 0 1 &mpic 8 1 0 0
233 0000 0 0 2 &mpic 9 1 0 0
234 0000 0 0 3 &mpic 10 1 0 0
235 0000 0 0 4 &mpic 11 2 0 0
237 ranges = <0x2000000 0x0 0x80000000
238 0x2000000 0x0 0x80000000
248 /include/ "fsl/p1023si-post.dtsi"