3 #Deploy script to install provisioning server for Foreman/QuickStack
4 #author: Tim Rozet (trozet@redhat.com)
6 #Uses Vagrant and VirtualBox
7 #VagrantFile uses bootsrap.sh which Installs Khaleesi
8 #Khaleesi will install and configure Foreman/QuickStack
11 #Supports 3 or 4 network interface configuration
12 #Target system must be RPM based
13 #Ensure the host's kernel is up to date (yum update)
14 #Provisioned nodes expected to have following order of network connections (note: not all have to exist, but order is maintained):
16 #eth1- private network (+storage network in 3 NIC config)
18 #eth3- storage network
19 #script assumes /24 subnet mask
27 declare -A interface_arr
32 echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
33 echo -e "\n${green}Make sure you have the latest kernel installed before running this script! (yum update kernel +reboot)${reset}\n"
34 echo -e "\nUsage:\n$0 [arguments] \n"
35 echo -e "\n -no_parse : No variable parsing into config. Flag. \n"
36 echo -e "\n -base_config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: -base_config /opt/myinventory.yml \n"
37 echo -e "\n -virtual : Node virtualization instead of baremetal. Flag. \n"
40 ##find ip of interface
41 ##params: interface name
43 ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
46 ##finds subnet of ip and netmask
48 function find_subnet {
49 IFS=. read -r i1 i2 i3 i4 <<< "$1"
50 IFS=. read -r m1 m2 m3 m4 <<< "$2"
51 printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
54 ##increments subnet by a value
57 function increment_subnet {
58 IFS=. read -r i1 i2 i3 i4 <<< "$1"
59 printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
63 ##finds netmask of interface
65 ##returns long format 255.255.x.x
66 function find_netmask {
67 ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
70 ##finds short netmask of interface
72 ##returns short format, ex: /21
73 function find_short_netmask {
74 echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
79 ##assumes a /24 subnet
81 baseaddr="$(echo $1 | cut -d. -f1-3)"
82 lsv="$(echo $1 | cut -d. -f4)"
83 if [ "$lsv" -ge 254 ]; then
90 ##removes the network interface config from Vagrantfile
92 ##assumes you are in the directory of Vagrantfile
93 function remove_vagrant_network {
94 sed -i 's/^.*'"$1"'.*$//' Vagrantfile
97 ##check if IP is in use
99 ##ping ip to get arp entry, then check arp
100 function is_ip_used {
101 ping -c 5 $1 > /dev/null 2>&1
102 arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
105 ##find next usable IP
107 function next_usable_ip {
109 while [ "$new_ip" ]; do
110 if ! is_ip_used $new_ip; then
114 new_ip=$(next_ip $new_ip)
119 ##increment ip by value
120 ##params: ip, amount to increment by
121 ##increment_ip $next_private_ip 10
122 function increment_ip {
123 baseaddr="$(echo $1 | cut -d. -f1-3)"
124 lsv="$(echo $1 | cut -d. -f4)"
127 if [ "$lsv" -ge 254 ]; then
133 ##translates yaml into variables
134 ##params: filename, prefix (ex. "config_")
135 ##usage: parse_yaml opnfv_ksgen_settings.yml "config_"
138 local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
139 sed -ne "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
140 -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $1 |
142 indent = length($1)/2;
144 for (i in vname) {if (i > indent) {delete vname[i]}}
145 if (length($3) > 0) {
146 vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
147 printf("%s%s%s=\"%s\"\n", "'$prefix'",vn, $2, $3);
154 if [[ ( $1 == "--help") || $1 == "-h" ]]; then
159 echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
160 echo "Use -h to display help"
163 while [ "`echo $1 | cut -c1`" = "-" ]
189 # Install EPEL repo for access to many other yum repos
190 # Major version is pinned to force some consistency for Arno
191 yum install -y epel-release-7*
193 # Install other required packages
194 # Major versions are pinned to force some consistency for Arno
195 if ! yum install -y binutils-2* gcc-4* make-3* patch-2* libgomp-4* glibc-headers-2* glibc-devel-2* kernel-headers-3* kernel-devel-3* dkms-2* psmisc-22*; then
196 printf '%s\n' 'deploy.sh: Unable to install depdency packages' >&2
200 ##install VirtualBox repo
201 if cat /etc/*release | grep -i "Fedora release"; then
202 vboxurl=http://download.virtualbox.org/virtualbox/rpm/fedora/\$releasever/\$basearch
204 vboxurl=http://download.virtualbox.org/virtualbox/rpm/el/\$releasever/\$basearch
207 cat > /etc/yum.repos.d/virtualbox.repo << EOM
209 name=Oracle Linux / RHEL / CentOS-\$releasever / \$basearch - VirtualBox
213 gpgkey=https://www.virtualbox.org/download/oracle_vbox.asc
214 skip_if_unavailable = 1
219 if ! yum list installed | grep -i virtualbox; then
220 if ! yum -y install VirtualBox-4.3; then
221 printf '%s\n' 'deploy.sh: Unable to install virtualbox package' >&2
226 ##install kmod-VirtualBox
227 if ! lsmod | grep vboxdrv; then
228 if ! sudo /etc/init.d/vboxdrv setup; then
229 printf '%s\n' 'deploy.sh: Unable to install kernel module for virtualbox' >&2
233 printf '%s\n' 'deploy.sh: Skipping kernel module for virtualbox. Already Installed'
237 if ! yum list installed | grep -i ansible; then
238 if ! yum -y install ansible-1*; then
239 printf '%s\n' 'deploy.sh: Unable to install Ansible package' >&2
245 if ! rpm -qa | grep vagrant; then
246 if ! rpm -Uvh https://dl.bintray.com/mitchellh/vagrant/vagrant_1.7.2_x86_64.rpm; then
247 printf '%s\n' 'deploy.sh: Unable to install vagrant package' >&2
251 printf '%s\n' 'deploy.sh: Skipping Vagrant install as it is already installed.'
254 ##add centos 7 box to vagrant
255 if ! vagrant box list | grep chef/centos-7.0; then
256 if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
257 printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
261 printf '%s\n' 'deploy.sh: Skipping Vagrant box add as centos-7.0 is already installed.'
264 ##install workaround for centos7
265 if ! vagrant plugin list | grep vagrant-centos7_fix; then
266 if ! vagrant plugin install vagrant-centos7_fix; then
267 printf '%s\n' 'deploy.sh: Warning: unable to install vagrant centos7 workaround' >&2
270 printf '%s\n' 'deploy.sh: Skipping Vagrant plugin as centos7 workaround is already installed.'
275 ##remove bgs vagrant incase it wasn't cleaned up
276 rm -rf /tmp/bgs_vagrant
279 ##will change this to be opnfv repo when commit is done
280 if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git; then
281 printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
287 echo "${blue}Detecting network configuration...${reset}"
288 ##detect host 1 or 3 interface configuration
289 #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
290 output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
292 if [ ! "$output" ]; then
293 printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
297 ##find number of interfaces with ip and substitute in VagrantFile
299 for interface in ${output}; do
301 if [ "$if_counter" -ge 4 ]; then
304 interface_ip=$(find_ip $interface)
305 if [ ! "$interface_ip" ]; then
308 new_ip=$(next_usable_ip $interface_ip)
309 if [ ! "$new_ip" ]; then
312 interface_arr[$interface]=$if_counter
313 interface_ip_arr[$if_counter]=$new_ip
314 subnet_mask=$(find_netmask $interface)
315 if [ "$if_counter" -eq 1 ]; then
316 private_subnet_mask=$subnet_mask
317 private_short_subnet_mask=$(find_short_netmask $interface)
319 if [ "$if_counter" -eq 2 ]; then
320 public_subnet_mask=$subnet_mask
321 public_short_subnet_mask=$(find_short_netmask $interface)
323 if [ "$if_counter" -eq 3 ]; then
324 storage_subnet_mask=$subnet_mask
326 sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
330 ##now remove interface config in Vagrantfile for 1 node
331 ##if 1, 3, or 4 interfaces set deployment type
332 ##if 2 interfaces remove 2nd interface and set deployment type
333 if [ "$if_counter" == 1 ]; then
334 deployment_type="single_network"
335 remove_vagrant_network eth_replace1
336 remove_vagrant_network eth_replace2
337 remove_vagrant_network eth_replace3
338 elif [ "$if_counter" == 2 ]; then
339 deployment_type="single_network"
340 second_interface=`echo $output | awk '{print $2}'`
341 remove_vagrant_network $second_interface
342 remove_vagrant_network eth_replace2
343 elif [ "$if_counter" == 3 ]; then
344 deployment_type="three_network"
345 remove_vagrant_network eth_replace3
347 deployment_type="multi_network"
350 echo "${blue}Network detected: ${deployment_type}! ${reset}"
352 if route | grep default; then
353 echo "${blue}Default Gateway Detected ${reset}"
354 host_default_gw=$(ip route | grep default | awk '{print $3}')
355 echo "${blue}Default Gateway: $host_default_gw ${reset}"
356 default_gw_interface=$(ip route get $host_default_gw | awk '{print $3}')
357 case "${interface_arr[$default_gw_interface]}" in
359 echo "${blue}Default Gateway Detected on Admin Interface!${reset}"
360 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
361 node_default_gw=$host_default_gw
364 echo "${red}Default Gateway Detected on Private Interface!${reset}"
365 echo "${red}Private subnet should be private and not have Internet access!${reset}"
369 echo "${blue}Default Gateway Detected on Public Interface!${reset}"
370 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
371 echo "${blue}Will setup NAT from Admin -> Public Network on VM!${reset}"
372 sed -i 's/^.*nat_flag =.*$/ nat_flag = true/' Vagrantfile
373 echo "${blue}Setting node gateway to be VM Admin IP${reset}"
374 node_default_gw=${interface_ip_arr[0]}
375 public_gateway=$default_gw
378 echo "${red}Default Gateway Detected on Storage Interface!${reset}"
379 echo "${red}Storage subnet should be private and not have Internet access!${reset}"
383 echo "${red}Unable to determine which interface default gateway is on..Exiting!${reset}"
389 defaultgw=`echo ${interface_ip_arr[0]} | cut -d. -f1-3`
391 defaultgw=$defaultgw$firstip
392 echo "${blue}Unable to find default gateway. Assuming it is $defaultgw ${reset}"
393 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$defaultgw"\"'/' Vagrantfile
394 node_default_gw=$defaultgw
397 if [ $base_config ]; then
398 if ! cp -f $base_config opnfv_ksgen_settings.yml; then
399 echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
404 if [ $no_parse ]; then
405 echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
409 echo "${blue}Gathering network parameters for Target System...this may take a few minutes${reset}"
410 ##Edit the ksgen settings appropriately
411 ##ksgen settings will be stored in /vagrant on the vagrant machine
412 ##if single node deployment all the variables will have the same ip
413 ##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
415 sed -i 's/^.*default_gw:.*$/default_gw:'" $node_default_gw"'/' opnfv_ksgen_settings.yml
417 ##replace private interface parameter
418 ##private interface will be of hosts, so we need to know the provisioned host interface name
419 ##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
420 ##replace IP for parameters with next IP that will be given to controller
421 if [ "$deployment_type" == "single_network" ]; then
422 ##we also need to assign IP addresses to nodes
423 ##for single node, foreman is managing the single network, so we can't reserve them
424 ##not supporting single network anymore for now
425 echo "{blue}Single Network type is unsupported right now. Please check your interface configuration. Exiting. ${reset}"
428 elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
430 if [ "$deployment_type" == "three_network" ]; then
431 sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
434 sed -i 's/^.*deployment_type:.*$/ deployment_type: '"$deployment_type"'/' opnfv_ksgen_settings.yml
436 ##get ip addresses for private network on controllers to make dhcp entries
437 ##required for controllers_ip_array global param
438 next_private_ip=${interface_ip_arr[1]}
440 for node in controller1 controller2 controller3; do
441 next_private_ip=$(next_usable_ip $next_private_ip)
442 if [ ! "$next_private_ip" ]; then
443 printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
446 sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
447 controller_ip_array=$controller_ip_array$next_private_ip,
450 ##replace global param for contollers_ip_array
451 controller_ip_array=${controller_ip_array%?}
452 sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml
454 ##now replace all the VIP variables. admin//private can be the same IP
455 ##we have to use IP's here that won't be allocated to hosts at provisioning time
456 ##therefore we increment the ip by 10 to make sure we have a safe buffer
457 next_private_ip=$(increment_ip $next_private_ip 10)
459 grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml | while read -r line ; do
460 sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
461 next_private_ip=$(next_usable_ip $next_private_ip)
462 if [ ! "$next_private_ip" ]; then
463 printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
468 ##replace foreman site
469 next_public_ip=${interface_ip_arr[2]}
470 sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$next_public_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
471 ##replace public vips
472 next_public_ip=$(increment_ip $next_public_ip 10)
473 grep -E '*public_vip' opnfv_ksgen_settings.yml | while read -r line ; do
474 sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
475 next_public_ip=$(next_usable_ip $next_public_ip)
476 if [ ! "$next_public_ip" ]; then
477 printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
482 ##replace public_network param
483 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
484 sed -i 's/^.*public_network:.*$/ public_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
485 ##replace private_network param
486 private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
487 sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
488 ##replace storage_network
489 if [ "$deployment_type" == "three_network" ]; then
490 sed -i 's/^.*storage_network:.*$/ storage_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
492 next_storage_ip=${interface_ip_arr[3]}
493 storage_subnet=$(find_subnet $next_storage_ip $storage_subnet_mask)
494 sed -i 's/^.*storage_network:.*$/ storage_network:'" $storage_subnet"'/' opnfv_ksgen_settings.yml
497 ##replace public_subnet param
498 public_subnet=$public_subnet'\'$public_short_subnet_mask
499 sed -i 's/^.*public_subnet:.*$/ public_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
500 ##replace private_subnet param
501 private_subnet=$private_subnet'\'$private_short_subnet_mask
502 sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
504 ##replace public_dns param to be foreman server
505 sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
507 ##replace public_gateway
508 if [ -z "$public_gateway" ]; then
509 ##if unset then we assume its the first IP in the public subnet
510 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
511 public_gateway=$(increment_subnet $public_subnet 1)
513 sed -i 's/^.*public_gateway:.*$/ public_gateway:'" $public_gateway"'/' opnfv_ksgen_settings.yml
515 ##we have to define an allocation range of the public subnet to give
516 ##to neutron to use as floating IPs
517 ##we should control this subnet, so this range should work .150-200
518 ##but generally this is a bad idea and we are assuming at least a /24 subnet here
519 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
520 public_allocation_start=$(increment_subnet $public_subnet 150)
521 public_allocation_end=$(increment_subnet $public_subnet 200)
523 sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
524 sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
527 printf '%s\n' 'deploy.sh: Unknown network type: $deployment_type' >&2
531 echo "${blue}Parameters Complete. Settings have been set for Foreman. ${reset}"
535 if [ $virtual ]; then
536 echo "${blue} Virtual flag detected, setting Khaleesi playbook to be opnfv-vm.yml ${reset}"
537 sed -i 's/opnfv.yml/opnfv-vm.yml/' bootstrap.sh
540 echo "${blue}Starting Vagrant! ${reset}"
543 if ! vagrant up; then
544 printf '%s\n' 'deploy.sh: Unable to start vagrant' >&2
547 echo "${blue}Foreman VM is up! ${reset}"
550 if [ $virtual ]; then
553 echo "${blue}Setting VMs up... ${reset}"
554 nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
555 ##due to ODL Helium bug of OVS connecting to ODL too early, we need controllers to install first
556 ##this is fix kind of assumes more than I would like to, but for now it should be OK as we always have
557 ##3 static controllers
558 compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
559 controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
560 nodes=${controller_nodes}${compute_nodes}
562 for node in ${nodes}; do
565 ##remove VM nodes incase it wasn't cleaned up
569 ##will change this to be opnfv repo when commit is done
570 if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git $node; then
571 printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
577 if [ $base_config ]; then
578 if ! cp -f $base_config opnfv_ksgen_settings.yml; then
579 echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
584 ##parse yaml into variables
585 eval $(parse_yaml opnfv_ksgen_settings.yml "config_")
587 node_type=config_nodes_${node}_type
588 node_type=$(eval echo \$$node_type)
590 ##find number of interfaces with ip and substitute in VagrantFile
591 output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
593 if [ ! "$output" ]; then
594 printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
600 for interface in ${output}; do
602 if [ "$if_counter" -ge 4 ]; then
605 interface_ip=$(find_ip $interface)
606 if [ ! "$interface_ip" ]; then
609 case "${if_counter}" in
611 mac_string=config_nodes_${node}_mac_address
612 mac_addr=$(eval echo \$$mac_string)
613 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
614 if [ $mac_addr == "" ]; then
615 echo "${red} Unable to find mac_address for $node! ${reset}"
620 if [ "$node_type" == "controller" ]; then
621 mac_string=config_nodes_${node}_private_mac
622 mac_addr=$(eval echo \$$mac_string)
623 if [ $mac_addr == "" ]; then
624 echo "${red} Unable to find private_mac for $node! ${reset}"
628 ##generate random mac
629 mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
631 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
634 mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
635 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
638 sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", bridge: '\'"$interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
642 ##now remove interface config in Vagrantfile for 1 node
643 ##if 1, 3, or 4 interfaces set deployment type
644 ##if 2 interfaces remove 2nd interface and set deployment type
645 if [ "$if_counter" == 1 ]; then
646 deployment_type="single_network"
647 remove_vagrant_network eth_replace1
648 remove_vagrant_network eth_replace2
649 remove_vagrant_network eth_replace3
650 elif [ "$if_counter" == 2 ]; then
651 deployment_type="single_network"
652 second_interface=`echo $output | awk '{print $2}'`
653 remove_vagrant_network $second_interface
654 remove_vagrant_network eth_replace2
655 elif [ "$if_counter" == 3 ]; then
656 deployment_type="three_network"
657 remove_vagrant_network eth_replace3
659 deployment_type="multi_network"
662 ##modify provisioning to do puppet install, config, and foreman check-in
663 ##substitute host_name and dns_server in the provisioning script
664 host_string=config_nodes_${node}_hostname
665 host_name=$(eval echo \$$host_string)
666 sed -i 's/^host_name=REPLACE/host_name='$host_name'/' vm_nodes_provision.sh
667 ##dns server should be the foreman server
668 sed -i 's/^dns_server=REPLACE/dns_server='${interface_ip_arr[0]}'/' vm_nodes_provision.sh
670 ## remove bootstrap and NAT provisioning
671 sed -i '/nat_setup.sh/d' Vagrantfile
672 sed -i 's/bootstrap.sh/vm_nodes_provision.sh/' Vagrantfile
674 ## modify default_gw to be node_default_gw
675 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$node_default_gw"\"'/' Vagrantfile
677 ## modify VM memory to be 4gig
678 sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile
680 echo "${blue}Starting Vagrant Node $node! ${reset}"
683 if ! vagrant up; then
684 echo "${red} Unable to start $node ${reset}"
687 echo "${blue} $node VM is up! ${reset}"
692 echo "${blue} All VMs are UP! ${reset}"