3 #Deploy script to install provisioning server for Foreman/QuickStack
4 #author: Tim Rozet (trozet@redhat.com)
6 #Uses Vagrant and VirtualBox
7 #VagrantFile uses bootsrap.sh which Installs Khaleesi
8 #Khaleesi will install and configure Foreman/QuickStack
11 #Supports 3 or 4 network interface configuration
12 #Target system must be RPM based
13 #Ensure the host's kernel is up to date (yum update)
14 #Provisioned nodes expected to have following order of network connections (note: not all have to exist, but order is maintained):
16 #eth1- private network (+storage network in 3 NIC config)
18 #eth3- storage network
19 #script assumes /24 subnet mask
27 declare -A interface_arr
32 echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
33 echo -e "\n${green}Make sure you have the latest kernel installed before running this script! (yum update kernel +reboot)${reset}\n"
34 echo -e "\nUsage:\n$0 [arguments] \n"
35 echo -e "\n -no_parse : No variable parsing into config. Flag. \n"
36 echo -e "\n -base_config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: -base_config /opt/myinventory.yml \n"
37 echo -e "\n -virtual : Node virtualization instead of baremetal. Flag. \n"
40 ##find ip of interface
41 ##params: interface name
43 ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
46 ##finds subnet of ip and netmask
48 function find_subnet {
49 IFS=. read -r i1 i2 i3 i4 <<< "$1"
50 IFS=. read -r m1 m2 m3 m4 <<< "$2"
51 printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
54 ##increments subnet by a value
57 function increment_subnet {
58 IFS=. read -r i1 i2 i3 i4 <<< "$1"
59 printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
63 ##finds netmask of interface
65 ##returns long format 255.255.x.x
66 function find_netmask {
67 ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
70 ##finds short netmask of interface
72 ##returns short format, ex: /21
73 function find_short_netmask {
74 echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
79 ##assumes a /24 subnet
81 baseaddr="$(echo $1 | cut -d. -f1-3)"
82 lsv="$(echo $1 | cut -d. -f4)"
83 if [ "$lsv" -ge 254 ]; then
90 ##removes the network interface config from Vagrantfile
92 ##assumes you are in the directory of Vagrantfile
93 function remove_vagrant_network {
94 sed -i 's/^.*'"$1"'.*$//' Vagrantfile
97 ##check if IP is in use
99 ##ping ip to get arp entry, then check arp
100 function is_ip_used {
101 ping -c 5 $1 > /dev/null 2>&1
102 arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
105 ##find next usable IP
107 function next_usable_ip {
109 while [ "$new_ip" ]; do
110 if ! is_ip_used $new_ip; then
114 new_ip=$(next_ip $new_ip)
119 ##increment ip by value
120 ##params: ip, amount to increment by
121 ##increment_ip $next_private_ip 10
122 function increment_ip {
123 baseaddr="$(echo $1 | cut -d. -f1-3)"
124 lsv="$(echo $1 | cut -d. -f4)"
127 if [ "$lsv" -ge 254 ]; then
133 ##translates yaml into variables
134 ##params: filename, prefix (ex. "config_")
135 ##usage: parse_yaml opnfv_ksgen_settings.yml "config_"
138 local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
139 sed -ne "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
140 -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $1 |
142 indent = length($1)/2;
144 for (i in vname) {if (i > indent) {delete vname[i]}}
145 if (length($3) > 0) {
146 vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
147 printf("%s%s%s=\"%s\"\n", "'$prefix'",vn, $2, $3);
154 if [[ ( $1 == "--help") || $1 == "-h" ]]; then
159 echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
160 echo "Use -h to display help"
163 while [ "`echo $1 | cut -c1`" = "-" ]
190 if ! yum repolist | grep "epel/"; then
191 if ! rpm -Uvh http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm; then
192 printf '%s\n' 'deploy.sh: Unable to configure EPEL repo' >&2
196 printf '%s\n' 'deploy.sh: Skipping EPEL repo as it is already configured.'
199 ##install dependencies
200 if ! yum -y install binutils gcc make patch libgomp glibc-headers glibc-devel kernel-headers kernel-devel dkms; then
201 printf '%s\n' 'deploy.sh: Unable to install depdency packages' >&2
205 ##install VirtualBox repo
206 if cat /etc/*release | grep -i "Fedora release"; then
207 vboxurl=http://download.virtualbox.org/virtualbox/rpm/fedora/\$releasever/\$basearch
209 vboxurl=http://download.virtualbox.org/virtualbox/rpm/el/\$releasever/\$basearch
212 cat > /etc/yum.repos.d/virtualbox.repo << EOM
214 name=Oracle Linux / RHEL / CentOS-\$releasever / \$basearch - VirtualBox
218 gpgkey=https://www.virtualbox.org/download/oracle_vbox.asc
219 skip_if_unavailable = 1
224 if ! yum list installed | grep -i virtualbox; then
225 if ! yum -y install VirtualBox-4.3; then
226 printf '%s\n' 'deploy.sh: Unable to install virtualbox package' >&2
231 ##install kmod-VirtualBox
232 if ! lsmod | grep vboxdrv; then
233 if ! sudo /etc/init.d/vboxdrv setup; then
234 printf '%s\n' 'deploy.sh: Unable to install kernel module for virtualbox' >&2
238 printf '%s\n' 'deploy.sh: Skipping kernel module for virtualbox. Already Installed'
242 if ! yum list installed | grep -i ansible; then
243 if ! yum -y install ansible; then
244 printf '%s\n' 'deploy.sh: Unable to install Ansible package' >&2
250 if ! rpm -qa | grep vagrant; then
251 if ! rpm -Uvh https://dl.bintray.com/mitchellh/vagrant/vagrant_1.7.2_x86_64.rpm; then
252 printf '%s\n' 'deploy.sh: Unable to install vagrant package' >&2
256 printf '%s\n' 'deploy.sh: Skipping Vagrant install as it is already installed.'
259 ##add centos 7 box to vagrant
260 if ! vagrant box list | grep chef/centos-7.0; then
261 if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
262 printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
266 printf '%s\n' 'deploy.sh: Skipping Vagrant box add as centos-7.0 is already installed.'
269 ##install workaround for centos7
270 if ! vagrant plugin list | grep vagrant-centos7_fix; then
271 if ! vagrant plugin install vagrant-centos7_fix; then
272 printf '%s\n' 'deploy.sh: Warning: unable to install vagrant centos7 workaround' >&2
275 printf '%s\n' 'deploy.sh: Skipping Vagrant plugin as centos7 workaround is already installed.'
280 ##remove bgs vagrant incase it wasn't cleaned up
281 rm -rf /tmp/bgs_vagrant
284 ##will change this to be opnfv repo when commit is done
285 if ! git clone https://github.com/trozet/bgs_vagrant.git; then
286 printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
292 echo "${blue}Detecting network configuration...${reset}"
293 ##detect host 1 or 3 interface configuration
294 #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
295 output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
297 if [ ! "$output" ]; then
298 printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
302 ##find number of interfaces with ip and substitute in VagrantFile
304 for interface in ${output}; do
306 if [ "$if_counter" -ge 4 ]; then
309 interface_ip=$(find_ip $interface)
310 if [ ! "$interface_ip" ]; then
313 new_ip=$(next_usable_ip $interface_ip)
314 if [ ! "$new_ip" ]; then
317 interface_arr[$interface]=$if_counter
318 interface_ip_arr[$if_counter]=$new_ip
319 subnet_mask=$(find_netmask $interface)
320 if [ "$if_counter" -eq 1 ]; then
321 private_subnet_mask=$subnet_mask
322 private_short_subnet_mask=$(find_short_netmask $interface)
324 if [ "$if_counter" -eq 2 ]; then
325 public_subnet_mask=$subnet_mask
326 public_short_subnet_mask=$(find_short_netmask $interface)
328 if [ "$if_counter" -eq 3 ]; then
329 storage_subnet_mask=$subnet_mask
331 sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
335 ##now remove interface config in Vagrantfile for 1 node
336 ##if 1, 3, or 4 interfaces set deployment type
337 ##if 2 interfaces remove 2nd interface and set deployment type
338 if [ "$if_counter" == 1 ]; then
339 deployment_type="single_network"
340 remove_vagrant_network eth_replace1
341 remove_vagrant_network eth_replace2
342 remove_vagrant_network eth_replace3
343 elif [ "$if_counter" == 2 ]; then
344 deployment_type="single_network"
345 second_interface=`echo $output | awk '{print $2}'`
346 remove_vagrant_network $second_interface
347 remove_vagrant_network eth_replace2
348 elif [ "$if_counter" == 3 ]; then
349 deployment_type="three_network"
350 remove_vagrant_network eth_replace3
352 deployment_type="multi_network"
355 echo "${blue}Network detected: ${deployment_type}! ${reset}"
357 if route | grep default; then
358 echo "${blue}Default Gateway Detected ${reset}"
359 host_default_gw=$(ip route | grep default | awk '{print $3}')
360 echo "${blue}Default Gateway: $host_default_gw ${reset}"
361 default_gw_interface=$(ip route get $host_default_gw | awk '{print $3}')
362 case "${interface_arr[$default_gw_interface]}" in
364 echo "${blue}Default Gateway Detected on Admin Interface!${reset}"
365 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
366 node_default_gw=$host_default_gw
369 echo "${red}Default Gateway Detected on Private Interface!${reset}"
370 echo "${red}Private subnet should be private and not have Internet access!${reset}"
374 echo "${blue}Default Gateway Detected on Public Interface!${reset}"
375 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
376 echo "${blue}Will setup NAT from Admin -> Public Network on VM!${reset}"
377 sed -i 's/^.*nat_flag =.*$/ nat_flag = true/' Vagrantfile
378 echo "${blue}Setting node gateway to be VM Admin IP${reset}"
379 node_default_gw=${interface_ip_arr[0]}
380 public_gateway=$default_gw
383 echo "${red}Default Gateway Detected on Storage Interface!${reset}"
384 echo "${red}Storage subnet should be private and not have Internet access!${reset}"
388 echo "${red}Unable to determine which interface default gateway is on..Exiting!${reset}"
394 defaultgw=`echo ${interface_ip_arr[0]} | cut -d. -f1-3`
396 defaultgw=$defaultgw$firstip
397 echo "${blue}Unable to find default gateway. Assuming it is $defaultgw ${reset}"
398 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$defaultgw"\"'/' Vagrantfile
399 node_default_gw=$defaultgw
402 if [ $base_config ]; then
403 if ! cp -f $base_config opnfv_ksgen_settings.yml; then
404 echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
409 if [ $no_parse ]; then
410 echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
414 echo "${blue}Gathering network parameters for Target System...this may take a few minutes${reset}"
415 ##Edit the ksgen settings appropriately
416 ##ksgen settings will be stored in /vagrant on the vagrant machine
417 ##if single node deployment all the variables will have the same ip
418 ##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
420 sed -i 's/^.*default_gw:.*$/default_gw:'" $node_default_gw"'/' opnfv_ksgen_settings.yml
422 ##replace private interface parameter
423 ##private interface will be of hosts, so we need to know the provisioned host interface name
424 ##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
425 ##replace IP for parameters with next IP that will be given to controller
426 if [ "$deployment_type" == "single_network" ]; then
427 ##we also need to assign IP addresses to nodes
428 ##for single node, foreman is managing the single network, so we can't reserve them
429 ##not supporting single network anymore for now
430 echo "{blue}Single Network type is unsupported right now. Please check your interface configuration. Exiting. ${reset}"
433 elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
435 if [ "$deployment_type" == "three_network" ]; then
436 sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
439 sed -i 's/^.*deployment_type:.*$/ deployment_type: '"$deployment_type"'/' opnfv_ksgen_settings.yml
441 ##get ip addresses for private network on controllers to make dhcp entries
442 ##required for controllers_ip_array global param
443 next_private_ip=${interface_ip_arr[1]}
445 for node in controller1 controller2 controller3; do
446 next_private_ip=$(next_usable_ip $next_private_ip)
447 if [ ! "$next_private_ip" ]; then
448 printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
451 sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
452 controller_ip_array=$controller_ip_array$next_private_ip,
455 ##replace global param for contollers_ip_array
456 controller_ip_array=${controller_ip_array%?}
457 sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml
459 ##now replace all the VIP variables. admin//private can be the same IP
460 ##we have to use IP's here that won't be allocated to hosts at provisioning time
461 ##therefore we increment the ip by 10 to make sure we have a safe buffer
462 next_private_ip=$(increment_ip $next_private_ip 10)
464 grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml | while read -r line ; do
465 sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
466 next_private_ip=$(next_usable_ip $next_private_ip)
467 if [ ! "$next_private_ip" ]; then
468 printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
473 ##replace foreman site
474 next_public_ip=${interface_ip_arr[2]}
475 sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$next_public_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
476 ##replace public vips
477 next_public_ip=$(increment_ip $next_public_ip 10)
478 grep -E '*public_vip' opnfv_ksgen_settings.yml | while read -r line ; do
479 sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
480 next_public_ip=$(next_usable_ip $next_public_ip)
481 if [ ! "$next_public_ip" ]; then
482 printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
487 ##replace public_network param
488 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
489 sed -i 's/^.*public_network:.*$/ public_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
490 ##replace private_network param
491 private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
492 sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
493 ##replace storage_network
494 if [ "$deployment_type" == "three_network" ]; then
495 sed -i 's/^.*storage_network:.*$/ storage_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
497 next_storage_ip=${interface_ip_arr[3]}
498 storage_subnet=$(find_subnet $next_storage_ip $storage_subnet_mask)
499 sed -i 's/^.*storage_network:.*$/ storage_network:'" $storage_subnet"'/' opnfv_ksgen_settings.yml
502 ##replace public_subnet param
503 public_subnet=$public_subnet'\'$public_short_subnet_mask
504 sed -i 's/^.*public_subnet:.*$/ public_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
505 ##replace private_subnet param
506 private_subnet=$private_subnet'\'$private_short_subnet_mask
507 sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
509 ##replace public_dns param to be foreman server
510 sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
512 ##replace public_gateway
513 if [ -z "$public_gateway" ]; then
514 ##if unset then we assume its the first IP in the public subnet
515 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
516 public_gateway=$(increment_subnet $public_subnet 1)
518 sed -i 's/^.*public_gateway:.*$/ public_gateway:'" $public_gateway"'/' opnfv_ksgen_settings.yml
520 ##we have to define an allocation range of the public subnet to give
521 ##to neutron to use as floating IPs
522 ##we should control this subnet, so this range should work .150-200
523 ##but generally this is a bad idea and we are assuming at least a /24 subnet here
524 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
525 public_allocation_start=$(increment_subnet $public_subnet 150)
526 public_allocation_end=$(increment_subnet $public_subnet 200)
528 sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
529 sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
532 printf '%s\n' 'deploy.sh: Unknown network type: $deployment_type' >&2
536 echo "${blue}Parameters Complete. Settings have been set for Foreman. ${reset}"
540 if [ $virtual ]; then
541 echo "${blue} Virtual flag detected, setting Khaleesi playbook to be opnfv-vm.yml ${reset}"
542 sed -i 's/opnfv.yml/opnfv-vm.yml/' bootstrap.sh
545 echo "${blue}Starting Vagrant! ${reset}"
548 if ! vagrant up; then
549 printf '%s\n' 'deploy.sh: Unable to start vagrant' >&2
552 echo "${blue}Foreman VM is up! ${reset}"
555 if [ $virtual ]; then
558 echo "${blue}Setting VMs up... ${reset}"
559 nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
560 ##due to ODL Helium bug of OVS connecting to ODL too early, we need controllers to install first
561 ##this is fix kind of assumes more than I would like to, but for now it should be OK as we always have
562 ##3 static controllers
563 compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
564 controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
565 nodes=${controller_nodes}${compute_nodes}
567 for node in ${nodes}; do
570 ##remove VM nodes incase it wasn't cleaned up
574 ##will change this to be opnfv repo when commit is done
575 if ! git clone https://github.com/trozet/bgs_vagrant.git $node; then
576 printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
582 if [ $base_config ]; then
583 if ! cp -f $base_config opnfv_ksgen_settings.yml; then
584 echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
589 ##parse yaml into variables
590 eval $(parse_yaml opnfv_ksgen_settings.yml "config_")
592 node_type=config_nodes_${node}_type
593 node_type=$(eval echo \$$node_type)
595 ##find number of interfaces with ip and substitute in VagrantFile
596 output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
598 if [ ! "$output" ]; then
599 printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
605 for interface in ${output}; do
607 if [ "$if_counter" -ge 4 ]; then
610 interface_ip=$(find_ip $interface)
611 if [ ! "$interface_ip" ]; then
614 case "${if_counter}" in
616 mac_string=config_nodes_${node}_mac_address
617 mac_addr=$(eval echo \$$mac_string)
618 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
619 if [ $mac_addr == "" ]; then
620 echo "${red} Unable to find mac_address for $node! ${reset}"
625 if [ "$node_type" == "controller" ]; then
626 mac_string=config_nodes_${node}_private_mac
627 mac_addr=$(eval echo \$$mac_string)
628 if [ $mac_addr == "" ]; then
629 echo "${red} Unable to find private_mac for $node! ${reset}"
633 ##generate random mac
634 mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
636 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
639 mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
640 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
643 sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", bridge: '\'"$interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
647 ##now remove interface config in Vagrantfile for 1 node
648 ##if 1, 3, or 4 interfaces set deployment type
649 ##if 2 interfaces remove 2nd interface and set deployment type
650 if [ "$if_counter" == 1 ]; then
651 deployment_type="single_network"
652 remove_vagrant_network eth_replace1
653 remove_vagrant_network eth_replace2
654 remove_vagrant_network eth_replace3
655 elif [ "$if_counter" == 2 ]; then
656 deployment_type="single_network"
657 second_interface=`echo $output | awk '{print $2}'`
658 remove_vagrant_network $second_interface
659 remove_vagrant_network eth_replace2
660 elif [ "$if_counter" == 3 ]; then
661 deployment_type="three_network"
662 remove_vagrant_network eth_replace3
664 deployment_type="multi_network"
667 ##modify provisioning to do puppet install, config, and foreman check-in
668 ##substitute host_name and dns_server in the provisioning script
669 host_string=config_nodes_${node}_hostname
670 host_name=$(eval echo \$$host_string)
671 sed -i 's/^host_name=REPLACE/host_name='$host_name'/' vm_nodes_provision.sh
672 ##dns server should be the foreman server
673 sed -i 's/^dns_server=REPLACE/dns_server='${interface_ip_arr[0]}'/' vm_nodes_provision.sh
675 ## remove bootstrap and NAT provisioning
676 sed -i '/nat_setup.sh/d' Vagrantfile
677 sed -i 's/bootstrap.sh/vm_nodes_provision.sh/' Vagrantfile
679 ## modify default_gw to be node_default_gw
680 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$node_default_gw"\"'/' Vagrantfile
682 ## modify VM memory to be 4gig
683 sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile
685 echo "${blue}Starting Vagrant Node $node! ${reset}"
688 if ! vagrant up; then
689 echo "${red} Unable to start $node ${reset}"
692 echo "${blue} $node VM is up! ${reset}"
697 echo "${blue} All VMs are UP! ${reset}"