3 #Deploy script to install provisioning server for Foreman/QuickStack
4 #author: Tim Rozet (trozet@redhat.com)
6 #Uses Vagrant and VirtualBox
7 #VagrantFile uses bootsrap.sh which Installs Khaleesi
8 #Khaleesi will install and configure Foreman/QuickStack
11 #Supports 3 or 4 network interface configuration
12 #Target system must be RPM based
13 #Ensure the host's kernel is up to date (yum update)
14 #Provisioned nodes expected to have following order of network connections (note: not all have to exist, but order is maintained):
16 #eth1- private network (+storage network in 3 NIC config)
18 #eth3- storage network
19 #script assumes /24 subnet mask
27 declare -A interface_arr
32 echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
33 echo -e "\n${green}Make sure you have the latest kernel installed before running this script! (yum update kernel +reboot)${reset}\n"
34 echo -e "\nUsage:\n$0 [arguments] \n"
35 echo -e "\n -no_parse : No variable parsing into config. Flag. \n"
36 echo -e "\n -base_config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: -base_config /opt/myinventory.yml \n"
37 echo -e "\n -virtual : Node virtualization instead of baremetal. Flag. \n"
40 ##find ip of interface
41 ##params: interface name
43 ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
46 ##finds subnet of ip and netmask
48 function find_subnet {
49 IFS=. read -r i1 i2 i3 i4 <<< "$1"
50 IFS=. read -r m1 m2 m3 m4 <<< "$2"
51 printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
54 ##increments subnet by a value
57 function increment_subnet {
58 IFS=. read -r i1 i2 i3 i4 <<< "$1"
59 printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
63 ##finds netmask of interface
65 ##returns long format 255.255.x.x
66 function find_netmask {
67 ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
70 ##finds short netmask of interface
72 ##returns short format, ex: /21
73 function find_short_netmask {
74 echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
79 ##assumes a /24 subnet
81 baseaddr="$(echo $1 | cut -d. -f1-3)"
82 lsv="$(echo $1 | cut -d. -f4)"
83 if [ "$lsv" -ge 254 ]; then
90 ##removes the network interface config from Vagrantfile
92 ##assumes you are in the directory of Vagrantfile
93 function remove_vagrant_network {
94 sed -i 's/^.*'"$1"'.*$//' Vagrantfile
97 ##check if IP is in use
99 ##ping ip to get arp entry, then check arp
100 function is_ip_used {
101 ping -c 5 $1 > /dev/null 2>&1
102 arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
105 ##find next usable IP
107 function next_usable_ip {
109 while [ "$new_ip" ]; do
110 if ! is_ip_used $new_ip; then
114 new_ip=$(next_ip $new_ip)
119 ##increment ip by value
120 ##params: ip, amount to increment by
121 ##increment_ip $next_private_ip 10
122 function increment_ip {
123 baseaddr="$(echo $1 | cut -d. -f1-3)"
124 lsv="$(echo $1 | cut -d. -f4)"
127 if [ "$lsv" -ge 254 ]; then
133 ##translates yaml into variables
134 ##params: filename, prefix (ex. "config_")
135 ##usage: parse_yaml opnfv_ksgen_settings.yml "config_"
138 local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
139 sed -ne "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
140 -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $1 |
142 indent = length($1)/2;
144 for (i in vname) {if (i > indent) {delete vname[i]}}
145 if (length($3) > 0) {
146 vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
147 printf("%s%s%s=\"%s\"\n", "'$prefix'",vn, $2, $3);
154 if [[ ( $1 == "--help") || $1 == "-h" ]]; then
159 echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
160 echo "Use -h to display help"
163 while [ "`echo $1 | cut -c1`" = "-" ]
189 # Install EPEL repo for access to many other yum repos
190 # Major version is pinned to force some consistency for Arno
191 yum install -y epel-release-7*
193 # Install other required packages
194 # Major versions are pinned to force some consistency for Arno
195 if ! yum install -y binutils-2* gcc-4* make-3* patch-2* libgomp-4* glibc-headers-2* glibc-devel-2* kernel-headers-3* kernel-devel-3* dkms-2* psmisc-22*; then
196 printf '%s\n' 'deploy.sh: Unable to install depdency packages' >&2
200 ##install VirtualBox repo
201 if cat /etc/*release | grep -i "Fedora release"; then
202 vboxurl=http://download.virtualbox.org/virtualbox/rpm/fedora/\$releasever/\$basearch
204 vboxurl=http://download.virtualbox.org/virtualbox/rpm/el/\$releasever/\$basearch
207 cat > /etc/yum.repos.d/virtualbox.repo << EOM
209 name=Oracle Linux / RHEL / CentOS-\$releasever / \$basearch - VirtualBox
213 gpgkey=https://www.virtualbox.org/download/oracle_vbox.asc
214 skip_if_unavailable = 1
219 if ! yum list installed | grep -i virtualbox; then
220 if ! yum -y install VirtualBox-4.3; then
221 printf '%s\n' 'deploy.sh: Unable to install virtualbox package' >&2
226 ##install kmod-VirtualBox
227 if ! lsmod | grep vboxdrv; then
228 sudo /etc/init.d/vboxdrv setup
229 if ! lsmod | grep vboxdrv; then
230 printf '%s\n' 'deploy.sh: Unable to install kernel module for virtualbox' >&2
234 printf '%s\n' 'deploy.sh: Skipping kernel module for virtualbox. Already Installed'
238 if ! yum list installed | grep -i ansible; then
239 if ! yum -y install ansible-1*; then
240 printf '%s\n' 'deploy.sh: Unable to install Ansible package' >&2
246 if ! rpm -qa | grep vagrant; then
247 if ! rpm -Uvh https://dl.bintray.com/mitchellh/vagrant/vagrant_1.7.2_x86_64.rpm; then
248 printf '%s\n' 'deploy.sh: Unable to install vagrant package' >&2
252 printf '%s\n' 'deploy.sh: Skipping Vagrant install as it is already installed.'
255 ##add centos 7 box to vagrant
256 if ! vagrant box list | grep chef/centos-7.0; then
257 if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
258 printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
262 printf '%s\n' 'deploy.sh: Skipping Vagrant box add as centos-7.0 is already installed.'
265 ##install workaround for centos7
266 if ! vagrant plugin list | grep vagrant-centos7_fix; then
267 if ! vagrant plugin install vagrant-centos7_fix; then
268 printf '%s\n' 'deploy.sh: Warning: unable to install vagrant centos7 workaround' >&2
271 printf '%s\n' 'deploy.sh: Skipping Vagrant plugin as centos7 workaround is already installed.'
276 ##remove bgs vagrant incase it wasn't cleaned up
277 rm -rf /tmp/bgs_vagrant
280 ##will change this to be opnfv repo when commit is done
281 if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git; then
282 printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
288 echo "${blue}Detecting network configuration...${reset}"
289 ##detect host 1 or 3 interface configuration
290 #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
291 output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
293 if [ ! "$output" ]; then
294 printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
298 ##find number of interfaces with ip and substitute in VagrantFile
300 for interface in ${output}; do
302 if [ "$if_counter" -ge 4 ]; then
305 interface_ip=$(find_ip $interface)
306 if [ ! "$interface_ip" ]; then
309 new_ip=$(next_usable_ip $interface_ip)
310 if [ ! "$new_ip" ]; then
313 interface_arr[$interface]=$if_counter
314 interface_ip_arr[$if_counter]=$new_ip
315 subnet_mask=$(find_netmask $interface)
316 if [ "$if_counter" -eq 1 ]; then
317 private_subnet_mask=$subnet_mask
318 private_short_subnet_mask=$(find_short_netmask $interface)
320 if [ "$if_counter" -eq 2 ]; then
321 public_subnet_mask=$subnet_mask
322 public_short_subnet_mask=$(find_short_netmask $interface)
324 if [ "$if_counter" -eq 3 ]; then
325 storage_subnet_mask=$subnet_mask
327 sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
331 ##now remove interface config in Vagrantfile for 1 node
332 ##if 1, 3, or 4 interfaces set deployment type
333 ##if 2 interfaces remove 2nd interface and set deployment type
334 if [ "$if_counter" == 1 ]; then
335 deployment_type="single_network"
336 remove_vagrant_network eth_replace1
337 remove_vagrant_network eth_replace2
338 remove_vagrant_network eth_replace3
339 elif [ "$if_counter" == 2 ]; then
340 deployment_type="single_network"
341 second_interface=`echo $output | awk '{print $2}'`
342 remove_vagrant_network $second_interface
343 remove_vagrant_network eth_replace2
344 elif [ "$if_counter" == 3 ]; then
345 deployment_type="three_network"
346 remove_vagrant_network eth_replace3
348 deployment_type="multi_network"
351 echo "${blue}Network detected: ${deployment_type}! ${reset}"
353 if route | grep default; then
354 echo "${blue}Default Gateway Detected ${reset}"
355 host_default_gw=$(ip route | grep default | awk '{print $3}')
356 echo "${blue}Default Gateway: $host_default_gw ${reset}"
357 default_gw_interface=$(ip route get $host_default_gw | awk '{print $3}')
358 case "${interface_arr[$default_gw_interface]}" in
360 echo "${blue}Default Gateway Detected on Admin Interface!${reset}"
361 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
362 node_default_gw=$host_default_gw
365 echo "${red}Default Gateway Detected on Private Interface!${reset}"
366 echo "${red}Private subnet should be private and not have Internet access!${reset}"
370 echo "${blue}Default Gateway Detected on Public Interface!${reset}"
371 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
372 echo "${blue}Will setup NAT from Admin -> Public Network on VM!${reset}"
373 sed -i 's/^.*nat_flag =.*$/ nat_flag = true/' Vagrantfile
374 echo "${blue}Setting node gateway to be VM Admin IP${reset}"
375 node_default_gw=${interface_ip_arr[0]}
376 public_gateway=$default_gw
379 echo "${red}Default Gateway Detected on Storage Interface!${reset}"
380 echo "${red}Storage subnet should be private and not have Internet access!${reset}"
384 echo "${red}Unable to determine which interface default gateway is on..Exiting!${reset}"
390 defaultgw=`echo ${interface_ip_arr[0]} | cut -d. -f1-3`
392 defaultgw=$defaultgw$firstip
393 echo "${blue}Unable to find default gateway. Assuming it is $defaultgw ${reset}"
394 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$defaultgw"\"'/' Vagrantfile
395 node_default_gw=$defaultgw
398 if [ $base_config ]; then
399 if ! cp -f $base_config opnfv_ksgen_settings.yml; then
400 echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
405 if [ $no_parse ]; then
406 echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
410 echo "${blue}Gathering network parameters for Target System...this may take a few minutes${reset}"
411 ##Edit the ksgen settings appropriately
412 ##ksgen settings will be stored in /vagrant on the vagrant machine
413 ##if single node deployment all the variables will have the same ip
414 ##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
416 sed -i 's/^.*default_gw:.*$/default_gw:'" $node_default_gw"'/' opnfv_ksgen_settings.yml
418 ##replace private interface parameter
419 ##private interface will be of hosts, so we need to know the provisioned host interface name
420 ##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
421 ##replace IP for parameters with next IP that will be given to controller
422 if [ "$deployment_type" == "single_network" ]; then
423 ##we also need to assign IP addresses to nodes
424 ##for single node, foreman is managing the single network, so we can't reserve them
425 ##not supporting single network anymore for now
426 echo "{blue}Single Network type is unsupported right now. Please check your interface configuration. Exiting. ${reset}"
429 elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
431 if [ "$deployment_type" == "three_network" ]; then
432 sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
435 sed -i 's/^.*deployment_type:.*$/ deployment_type: '"$deployment_type"'/' opnfv_ksgen_settings.yml
437 ##get ip addresses for private network on controllers to make dhcp entries
438 ##required for controllers_ip_array global param
439 next_private_ip=${interface_ip_arr[1]}
441 for node in controller1 controller2 controller3; do
442 next_private_ip=$(next_usable_ip $next_private_ip)
443 if [ ! "$next_private_ip" ]; then
444 printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
447 sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
448 controller_ip_array=$controller_ip_array$next_private_ip,
451 ##replace global param for contollers_ip_array
452 controller_ip_array=${controller_ip_array%?}
453 sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml
455 ##now replace all the VIP variables. admin//private can be the same IP
456 ##we have to use IP's here that won't be allocated to hosts at provisioning time
457 ##therefore we increment the ip by 10 to make sure we have a safe buffer
458 next_private_ip=$(increment_ip $next_private_ip 10)
460 grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml | while read -r line ; do
461 sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
462 next_private_ip=$(next_usable_ip $next_private_ip)
463 if [ ! "$next_private_ip" ]; then
464 printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
469 ##replace foreman site
470 next_public_ip=${interface_ip_arr[2]}
471 sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$next_public_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
472 ##replace public vips
473 next_public_ip=$(increment_ip $next_public_ip 10)
474 grep -E '*public_vip' opnfv_ksgen_settings.yml | while read -r line ; do
475 sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
476 next_public_ip=$(next_usable_ip $next_public_ip)
477 if [ ! "$next_public_ip" ]; then
478 printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
483 ##replace public_network param
484 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
485 sed -i 's/^.*public_network:.*$/ public_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
486 ##replace private_network param
487 private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
488 sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
489 ##replace storage_network
490 if [ "$deployment_type" == "three_network" ]; then
491 sed -i 's/^.*storage_network:.*$/ storage_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
493 next_storage_ip=${interface_ip_arr[3]}
494 storage_subnet=$(find_subnet $next_storage_ip $storage_subnet_mask)
495 sed -i 's/^.*storage_network:.*$/ storage_network:'" $storage_subnet"'/' opnfv_ksgen_settings.yml
498 ##replace public_subnet param
499 public_subnet=$public_subnet'\'$public_short_subnet_mask
500 sed -i 's/^.*public_subnet:.*$/ public_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
501 ##replace private_subnet param
502 private_subnet=$private_subnet'\'$private_short_subnet_mask
503 sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
505 ##replace public_dns param to be foreman server
506 sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
508 ##replace public_gateway
509 if [ -z "$public_gateway" ]; then
510 ##if unset then we assume its the first IP in the public subnet
511 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
512 public_gateway=$(increment_subnet $public_subnet 1)
514 sed -i 's/^.*public_gateway:.*$/ public_gateway:'" $public_gateway"'/' opnfv_ksgen_settings.yml
516 ##we have to define an allocation range of the public subnet to give
517 ##to neutron to use as floating IPs
518 ##we should control this subnet, so this range should work .150-200
519 ##but generally this is a bad idea and we are assuming at least a /24 subnet here
520 public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
521 public_allocation_start=$(increment_subnet $public_subnet 150)
522 public_allocation_end=$(increment_subnet $public_subnet 200)
524 sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
525 sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
528 printf '%s\n' 'deploy.sh: Unknown network type: $deployment_type' >&2
532 echo "${blue}Parameters Complete. Settings have been set for Foreman. ${reset}"
536 if [ $virtual ]; then
537 echo "${blue} Virtual flag detected, setting Khaleesi playbook to be opnfv-vm.yml ${reset}"
538 sed -i 's/opnfv.yml/opnfv-vm.yml/' bootstrap.sh
541 echo "${blue}Starting Vagrant! ${reset}"
544 if ! vagrant up; then
545 printf '%s\n' 'deploy.sh: Unable to start vagrant' >&2
548 echo "${blue}Foreman VM is up! ${reset}"
551 if [ $virtual ]; then
554 echo "${blue}Setting VMs up... ${reset}"
555 nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
556 ##due to ODL Helium bug of OVS connecting to ODL too early, we need controllers to install first
557 ##this is fix kind of assumes more than I would like to, but for now it should be OK as we always have
558 ##3 static controllers
559 compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
560 controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
561 nodes=${controller_nodes}${compute_nodes}
563 for node in ${nodes}; do
566 ##remove VM nodes incase it wasn't cleaned up
570 ##will change this to be opnfv repo when commit is done
571 if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git $node; then
572 printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
578 if [ $base_config ]; then
579 if ! cp -f $base_config opnfv_ksgen_settings.yml; then
580 echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
585 ##parse yaml into variables
586 eval $(parse_yaml opnfv_ksgen_settings.yml "config_")
588 node_type=config_nodes_${node}_type
589 node_type=$(eval echo \$$node_type)
591 ##find number of interfaces with ip and substitute in VagrantFile
592 output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
594 if [ ! "$output" ]; then
595 printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
601 for interface in ${output}; do
603 if [ "$if_counter" -ge 4 ]; then
606 interface_ip=$(find_ip $interface)
607 if [ ! "$interface_ip" ]; then
610 case "${if_counter}" in
612 mac_string=config_nodes_${node}_mac_address
613 mac_addr=$(eval echo \$$mac_string)
614 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
615 if [ $mac_addr == "" ]; then
616 echo "${red} Unable to find mac_address for $node! ${reset}"
621 if [ "$node_type" == "controller" ]; then
622 mac_string=config_nodes_${node}_private_mac
623 mac_addr=$(eval echo \$$mac_string)
624 if [ $mac_addr == "" ]; then
625 echo "${red} Unable to find private_mac for $node! ${reset}"
629 ##generate random mac
630 mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
632 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
635 mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
636 mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
639 sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", bridge: '\'"$interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
643 ##now remove interface config in Vagrantfile for 1 node
644 ##if 1, 3, or 4 interfaces set deployment type
645 ##if 2 interfaces remove 2nd interface and set deployment type
646 if [ "$if_counter" == 1 ]; then
647 deployment_type="single_network"
648 remove_vagrant_network eth_replace1
649 remove_vagrant_network eth_replace2
650 remove_vagrant_network eth_replace3
651 elif [ "$if_counter" == 2 ]; then
652 deployment_type="single_network"
653 second_interface=`echo $output | awk '{print $2}'`
654 remove_vagrant_network $second_interface
655 remove_vagrant_network eth_replace2
656 elif [ "$if_counter" == 3 ]; then
657 deployment_type="three_network"
658 remove_vagrant_network eth_replace3
660 deployment_type="multi_network"
663 ##modify provisioning to do puppet install, config, and foreman check-in
664 ##substitute host_name and dns_server in the provisioning script
665 host_string=config_nodes_${node}_hostname
666 host_name=$(eval echo \$$host_string)
667 sed -i 's/^host_name=REPLACE/host_name='$host_name'/' vm_nodes_provision.sh
668 ##dns server should be the foreman server
669 sed -i 's/^dns_server=REPLACE/dns_server='${interface_ip_arr[0]}'/' vm_nodes_provision.sh
671 ## remove bootstrap and NAT provisioning
672 sed -i '/nat_setup.sh/d' Vagrantfile
673 sed -i 's/bootstrap.sh/vm_nodes_provision.sh/' Vagrantfile
675 ## modify default_gw to be node_default_gw
676 sed -i 's/^.*default_gw =.*$/ default_gw = '\""$node_default_gw"\"'/' Vagrantfile
678 ## modify VM memory to be 4gig
679 sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile
681 echo "${blue}Starting Vagrant Node $node! ${reset}"
684 if ! vagrant up; then
685 echo "${red} Unable to start $node ${reset}"
688 echo "${blue} $node VM is up! ${reset}"
693 echo "${blue} All VMs are UP! ${reset}"