1 .. This work is licensed under a Creative Commons Attribution 4.0 International
3 .. http://creativecommons.org/licenses/by/4.0
4 .. (c) OPNFV, Huawei Technologies Co.,Ltd and others.
6 *************************************
7 Yardstick Test Case Description TC027
8 *************************************
10 .. _ipv6: https://wiki.opnfv.org/ipv6_opnfv_project
12 +-----------------------------------------------------------------------------+
13 |IPv6 connectivity between nodes on the tenant network |
15 +--------------+--------------------------------------------------------------+
16 |test case id | OPNFV_YARDSTICK_TC027_IPv6 connectivity |
18 +--------------+--------------------------------------------------------------+
19 |metric | RTT, Round Trip Time |
21 +--------------+--------------------------------------------------------------+
22 |test purpose | To do a basic verification that IPv6 connectivity is within |
23 | | acceptable boundaries when ipv6 packets travel between hosts |
24 | | located on same or different compute blades. |
25 | | The purpose is also to be able to spot trends. Test results, |
26 | | graphs and similar shall be stored for comparison reasons and|
27 | | product evolution understanding between different OPNFV |
28 | | versions and/or configurations. |
30 +--------------+--------------------------------------------------------------+
31 |configuration | file: opnfv_yardstick_tc027.yaml |
33 | | Packet size 56 bytes. |
34 | | SLA RTT is set to maximum 10 ms. |
36 +--------------+--------------------------------------------------------------+
39 | | Ping6 is normally part of Linux distribution, hence it |
40 | | doesn't need to be installed. |
42 +--------------+--------------------------------------------------------------+
47 +--------------+--------------------------------------------------------------+
48 |applicability | Test case can be configured with different run step |
49 | | you can run setup, run benchmakr, teardown independently |
50 | | SLA is optional. The SLA in this test case serves as an |
51 | | example. Considerably lower RTT is expected. |
53 +--------------+--------------------------------------------------------------+
54 |pre-test | The test case image needs to be installed into Glance |
55 |conditions | with ping6 included in it. |
57 | | No POD specific requirements have been identified. |
59 +--------------+--------------------------------------------------------------+
60 |test sequence | description and expected result |
62 +--------------+--------------------------------------------------------------+
63 |step 1 | The hosts are installed, as server and client. Ping is |
64 | | invoked and logs are produced and stored. |
66 | | Result: Logs are stored. |
68 +--------------+--------------------------------------------------------------+
69 |test verdict | Test should not PASS if any RTT is above the optional SLA |
70 | | value, or if there is a test case execution problem. |
72 +--------------+--------------------------------------------------------------+