1 # This configuration file defines Network Environment for a
2 # Baremetal Deployment of OPNFV. It contains default values
3 # for 5 following networks:
10 # *) optional networks
12 # Optional networks will be consolidated with the admin network
13 # if not explicitly configured.
15 # See short description of the networks in the comments below.
17 # "admin" is the short name for Control Plane Network.
18 # This network should be IPv4 even it is an IPv6 deployment
19 # IPv6 does not have PXE boot support.
20 # During OPNFV deployment it is used for node provisioning which will require
21 # PXE booting as well as running a DHCP server on this network. Be sure to
22 # disable any other DHCP/TFTP server on this network.
24 # "tenant" is the network used for tenant traffic.
26 # "external" is the network which should have internet or external
27 # connectivity. External OpenStack networks will be configured to egress this
28 # network. There can be multiple external networks, but only one assigned as
29 # "public" which OpenStack public API's will register.
31 # "storage" is the network for storage I/O.
33 # "api" is an optional network for splitting out OpenStack service API
34 # communication. This should be used for IPv6 deployments.
37 #Meta data for the network configuration
38 network-config-metadata:
39 title: LF-POD-1 Network config
41 created: Mon Dec 28 2015
45 dns-domain: opnfvlf.org
46 dns-search: opnfvlf.org
59 networks: # Network configurations
60 admin: # Admin configuration (pxe and jumpstart),
62 installer_vm: # Network settings for the Installer VM on admin network
63 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
65 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
66 vlan: native # VLAN tag to use for this network on Installer VM, native means none
67 ip: 192.0.2.1 # IP to assign to Installer VM on this network
70 - 192.0.2.99 # Usable ip range, if empty entire range is usable
71 gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled)
72 cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24
75 - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned
76 nic_mapping: # Mapping of network configuration for Overcloud Nodes
77 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
78 phys_type: interface # Physical interface type (interface or bond)
79 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
81 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
86 tenant: # Tenant network configuration
88 cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24
89 mtu: 64000 # Tenant network MTU
90 overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range:
92 segmentation_type: vxlan # Tenant network segmentation type:
94 nic_mapping: # Mapping of network configuration for Overcloud Nodes
95 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
96 phys_type: interface # Physical interface type (interface or bond)
97 vlan: 401 # VLAN tag to use with this NIC
98 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
99 - nic1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
100 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
104 - nic1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
106 external: # Can contain 1 or more external networks
107 - public: # "public" network will be the network the installer VM attaches to
109 mtu: 64000 # Public network MTU
110 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
111 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
114 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
115 ip: 192.168.37.12 # IP to assign to Installer VM on this network
116 cidr: 192.168.37.0/24
117 gateway: 192.168.37.1
120 - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron
123 - 192.168.37.199 # Usable IP range on the public network, usually this is a shared subnet
124 nic_mapping: # Mapping of network configuration for Overcloud Nodes
125 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
126 phys_type: interface # Physical interface type (interface or bond)
127 vlan: 501 # VLAN tag to use with this NIC
128 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
130 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
135 external_overlay: # External network to be created in OpenStack by Services tenant
136 name: Public_internet
138 gateway: 192.168.37.1
139 - private_cloud: # another external network
142 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
143 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
146 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
147 ip: 192.168.38.12 # IP to assign to Installer VM on this network
148 cidr: 192.168.38.0/24
149 gateway: 192.168.38.1
152 - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron
155 - 192.168.38.199 # Usable IP range on the public network, usually this is a shared subnet
156 nic_mapping: # Mapping of network configuration for Overcloud Nodes
157 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
158 phys_type: interface # Physical interface type (interface or bond)
159 vlan: 502 # VLAN tag to use with this NIC
160 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
161 - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
162 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
167 external_overlay: # External network to be created in OpenStack by Services tenant
171 gateway: 192.168.38.1
173 storage: # Storage network configuration
175 cidr: 12.0.0.0/24 # Subnet in CIDR format
176 mtu: 64000 # Tenant network MTU
177 nic_mapping: # Mapping of network configuration for Overcloud Nodes
178 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
179 phys_type: bond # Physical interface type (interface or bond)
180 vlan: 201 # VLAN tag to use with this NIC
181 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
182 - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
183 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
189 api: # API network configuration
191 cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format
192 mtu: 64000 # Tenant network MTU
193 nic_mapping: # Mapping of network configuration for Overcloud Nodes
194 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
195 phys_type: bond # Physical interface type (interface or bond)
196 vlan: 101 # VLAN tag to use with this NIC
197 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
198 - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
199 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
205 # JOID specific settings
208 # Compass specific settings
211 # Apex specific settings
217 - 192.0.2.120 # Range used for introspection phase (examining nodes)
218 # Fuel specific settings