1 # This configuration file defines Network Environment for a
2 # Baremetal Deployment of OPNFV. It contains default values
3 # for 5 following networks:
10 # *) optional networks
12 # Optional networks will be consolidated with the admin network
13 # if not explicitly configured.
15 # See short description of the networks in the comments below.
17 # "admin" is the short name for Control Plane Network.
18 # This network should be IPv4 even it is an IPv6 deployment
19 # IPv6 does not have PXE boot support.
20 # During OPNFV deployment it is used for node provisioning which will require
21 # PXE booting as well as running a DHCP server on this network. Be sure to
22 # disable any other DHCP/TFTP server on this network.
24 # "tenant" is the network used for tenant traffic.
26 # "external" is the network which should have internet or external
27 # connectivity. External OpenStack networks will be configured to egress this
28 # network. There can be multiple external networks, but only one assigned as
29 # "public" which OpenStack public API's will register.
31 # "storage" is the network for storage I/O.
33 # "api" is an optional network for splitting out OpenStack service API
34 # communication. This should be used for IPv6 deployments.
37 #Meta data for the network configuration
38 network-config-metadata:
39 title: LF-POD-1 Network config
41 created: Mon Dec 28 2015
45 dns-domain: opnfvlf.org
46 dns-search: opnfvlf.org
59 # Common network settings
60 networks: # Network configurations
61 admin: # Admin configuration (pxe and jumpstart),
63 installer_vm: # Network settings for the Installer VM on admin network
64 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
66 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
67 vlan: native # VLAN tag to use for this network on Installer VM, native means none
68 ip: 192.0.2.1 # IP to assign to Installer VM on this network
71 - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be
72 # used for host bridge (i.e. br-admin).
73 # If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range.
74 gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled)
75 cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24
78 - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned.
79 # Cannot overlap with usable_ip_range or introspection_range.
80 nic_mapping: # Mapping of network configuration for Overcloud Nodes
81 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
82 phys_type: interface # Physical interface type (interface or bond)
83 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
85 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
90 tenant: # Tenant network configuration
92 cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24
93 mtu: 1500 # Tenant network MTU
94 overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range:
96 segmentation_type: vxlan # Tenant network segmentation type:
98 nic_mapping: # Mapping of network configuration for Overcloud Nodes
99 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
100 phys_type: interface # Physical interface type (interface or bond)
101 vlan: native # VLAN tag to use with this NIC
102 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
103 - nic2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
104 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
108 - nic2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
110 external: # Can contain 1 or more external networks
111 - public: # "public" network will be the network the installer VM attaches to
113 mtu: 1500 # Public network MTU
114 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
115 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
118 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
119 ip: 2001:db8::1 # IP to assign to Installer VM on this network
123 - 2001:db8:0:0:0:0:0:2
124 - 2001:db8:0:0:ffff:ffff:ffff:ffff # Floating IPs range to assign to the overcloud (External IPs to be NAT'ed to Tenant IP)
125 nic_mapping: # Mapping of network configuration for Overcloud Nodes
126 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
127 phys_type: interface # Physical interface type (interface or bond)
128 vlan: native # VLAN tag to use with this NIC
129 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
131 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
136 external_overlay: # External network to be created in OpenStack by Services tenant
137 name: Public_internet
141 storage: # Storage network configuration
143 cidr: fd00:fd00:fd00:2000::/64 # Subnet in CIDR format
144 mtu: 1500 # Storage network MTU
145 nic_mapping: # Mapping of network configuration for Overcloud Nodes
146 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
147 phys_type: interface # Physical interface type (interface or bond)
148 vlan: native # VLAN tag to use with this NIC
149 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
150 - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
151 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
157 api: # API network configuration
159 cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format
160 vlan: 13 # VLAN tag to use for Overcloud hosts on this network
161 mtu: 1500 # Api network MTU
162 nic_mapping: # Mapping of network configuration for Overcloud Nodes
163 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
164 phys_type: interface # Physical interface type (interface or bond)
165 vlan: native # VLAN tag to use with this NIC
166 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
167 - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
168 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
174 # Apex specific settings
180 - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or usable_ip_range.