1 # This configuration file defines Network Environment for a
2 # Baremetal Deployment of OPNFV. It contains default values
3 # for 5 following networks:
10 # *) optional networks
12 # Optional networks will be consolidated with the admin network
13 # if not explicitly configured.
15 # See short description of the networks in the comments below.
17 # "admin" is the short name for Control Plane Network.
18 # This network should be IPv4 even it is an IPv6 deployment
19 # IPv6 does not have PXE boot support.
20 # During OPNFV deployment it is used for node provisioning which will require
21 # PXE booting as well as running a DHCP server on this network. Be sure to
22 # disable any other DHCP/TFTP server on this network.
24 # "tenant" is the network used for tenant traffic.
26 # "external" is the network which should have internet or external
27 # connectivity. External OpenStack networks will be configured to egress this
28 # network. There can be multiple external networks, but only one assigned as
29 # "public" which OpenStack public API's will register.
31 # "storage" is the network for storage I/O.
33 # "api" is an optional network for splitting out OpenStack service API
34 # communication. This should be used for IPv6 deployments.
37 #Meta data for the network configuration
38 network-config-metadata:
39 title: LF-POD-1 Network config
41 created: Mon Dec 28 2015
45 dns-domain: opnfvlf.org
46 dns-search: opnfvlf.org
59 # Common network settings
60 networks: # Network configurations
61 admin: # Admin configuration (pxe and jumpstart),
63 installer_vm: # Network settings for the Installer VM on admin network
64 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
66 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
67 vlan: native # VLAN tag to use for this network on Installer VM, native means none
68 ip: 192.0.2.1 # IP to assign to Installer VM on this network
71 - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be
72 # used for host bridge (i.e. br-admin). If empty entire range is usable.
73 # Cannot overlap with dhcp_range or introspection_range.
74 gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled)
75 cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24
78 - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned
79 nic_mapping: # Mapping of network configuration for Overcloud Nodes
80 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
81 phys_type: interface # Physical interface type (interface or bond)
82 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
84 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
89 tenant: # Tenant network configuration
91 cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24
92 mtu: 1500 # Tenant network MTU
93 overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range:
95 segmentation_type: vxlan # Tenant network segmentation type:
97 nic_mapping: # Mapping of network configuration for Overcloud Nodes
98 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
99 phys_type: interface # Physical interface type (interface or bond)
100 uio_driver: uio_pci_generic # UIO driver to use for DPDK scenarios. The value is ignored for non-DPDK scenarios.
101 vlan: native # VLAN tag to use with this NIC
102 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
103 - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
104 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
108 - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
110 external: # Can contain 1 or more external networks
111 - public: # "public" network will be the network the installer VM attaches to
113 mtu: 1500 # Public network MTU
114 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
115 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
118 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
119 ip: 192.168.37.1 # IP to assign to Installer VM on this network
120 cidr: 192.168.37.0/24
121 gateway: 192.168.37.1
124 - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron
127 - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host
128 # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range.
129 nic_mapping: # Mapping of network configuration for Overcloud Nodes
130 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
131 phys_type: interface # Physical interface type (interface or bond)
132 vlan: native # VLAN tag to use with this NIC
133 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
135 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
140 external_overlay: # External network to be created in OpenStack by Services tenant
141 name: Public_internet
143 gateway: 192.168.37.1
144 - private_cloud: # another external network
147 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
148 nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
151 - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
152 ip: 192.168.38.1 # IP to assign to Installer VM on this network
153 cidr: 192.168.38.0/24
154 gateway: 192.168.38.1
157 - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron
160 - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet.
161 # Cannot overlap with dhcp_range or introspection_range.
162 nic_mapping: # Mapping of network configuration for Overcloud Nodes
163 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
164 phys_type: interface # Physical interface type (interface or bond)
165 vlan: 101 # VLAN tag to use with this NIC
166 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
167 - eth2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
168 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
173 external_overlay: # External network to be created in OpenStack by Services tenant
177 gateway: 192.168.38.1
179 storage: # Storage network configuration
181 cidr: 12.0.0.0/24 # Subnet in CIDR format
182 mtu: 1500 # Storage network MTU
183 nic_mapping: # Mapping of network configuration for Overcloud Nodes
184 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
185 phys_type: interface # Physical interface type (interface or bond)
186 vlan: native # VLAN tag to use with this NIC
187 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
188 - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
189 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
195 api: # API network configuration
197 cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format
198 vlan: 13 # VLAN tag to use for Overcloud hosts on this network
199 mtu: 1500 # Api network MTU
200 nic_mapping: # Mapping of network configuration for Overcloud Nodes
201 compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
202 phys_type: interface # Physical interface type (interface or bond)
203 vlan: native # VLAN tag to use with this NIC
204 members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
205 - eth4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
206 controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
212 # Apex specific settings
218 - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range.
219 # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range
220 # for the overcloud default external network