1 # Copyright 2015 Intel Corporation.
3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at
7 # http://www.apache.org/licenses/LICENSE-2.0
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
15 # ############################
16 # Traffic gen configuration
17 # ############################
19 # log file for all traffic generator related commands
20 LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
22 # TRAFFIC dictionary defines traffic parameters used by all traffic generators.
23 # Detailed description of TRAFFIC dictionary items follows:
25 # 'traffic_type' - One of the supported traffic types.
26 # E.g. rfc2544_throughput, rfc2544_back2back
27 # or rfc2544_continuous
29 # Default value: "rfc2544_throughput".
30 # 'bidir' - Specifies if generated traffic will be full-duplex (True)
31 # or half-duplex (False)
33 # Supported values: "True", "False"
34 # Default value: "False".
35 # 'frame_rate' - Defines desired percentage of frame rate used during
36 # continuous stream tests.
39 # 'multistream' - Defines number of flows simulated by traffic generator.
40 # Value 0 disables multistream feature
42 # Supported values: 0-65535
44 # 'stream_type' - Stream type is an extension of the "multistream" feature.
45 # If multistream is disabled, then stream type will be
46 # ignored. Stream type defines ISO OSI network layer used
47 # for simulation of multiple streams.
50 # "L2" - iteration of destination MAC address
51 # "L3" - iteration of destination IP address
52 # "L4" - iteration of destination port
53 # of selected transport protocol
54 # Default value: "L4".
55 # 'pre_installed_flows'
56 # - Pre-installed flows is an extension of the multistream"
57 # feature. If multistream is disabled, then pre-installed
58 # flows will be ignored. It defines if stream specific flows
59 # will be inserted into OVS or not.
62 # "Yes" - flows will be inserted into OVS
63 # "No" - flows won't be inserted into OVS
64 # Default value: "No".
65 # 'flow_type' - Defines flows complexity.
68 # "port" - flow is defined by ingress ports
69 # "IP" - flow is defined by ingress ports
70 # and src and dst IP addresses
71 # Default value: "port"
72 # 'l2' - A dictionary with l2 network layer details. Supported
74 # 'srcmac' - Specifies source MAC address filled by traffic generator.
75 # NOTE: It can be modified by vsperf in some scenarios.
77 # Default value: "00:00:00:00:00:00".
78 # 'dstmac' - Specifies destination MAC address filled by traffic generator.
79 # NOTE: It can be modified by vsperf in some scenarios.
81 # Default value: "00:00:00:00:00:00".
82 # 'framesize' - Specifies default frame size. This value should not be
83 # changed directly. It will be overridden during testcase
84 # execution by values specified by list TRAFFICGEN_PKT_SIZES.
87 # 'l3' - A dictionary with l3 network layer details. Supported
89 # 'srcip' - Specifies source MAC address filled by traffic generator.
90 # NOTE: It can be modified by vsperf in some scenarios.
92 # Default value: "1.1.1.1".
93 # 'dstip' - Specifies destination MAC address filled by traffic generator.
94 # NOTE: It can be modified by vsperf in some scenarios.
96 # Default value: "90.90.90.90".
97 # 'proto' - Specifies deflaut protocol type.
98 # Please check particular traffic generator implementation
99 # for supported protocol types.
101 # Default value: "udp".
102 # 'l4' - A dictionary with l4 network layer details. Supported
104 # 'srcport' - Specifies source port of selected transport protocol.
105 # NOTE: It can be modified by vsperf in some scenarios.
107 # Default value: 3000
108 # 'dstport' - Specifies destination port of selected transport protocol.
109 # NOTE: It can be modified by vsperf in some scenarios.
111 # Default value: 3001
112 # 'vlan' - A dictionary with vlan encapsulation details. Supported
114 # 'enabled' - Specifies if vlan encapsulation should be enabled or
117 # Default value: False
118 # 'id' - Specifies vlan id.
119 # Data type: int (NOTE: must fit to 12 bits)
121 # 'priority' - Specifies a vlan priority (PCP header field).
122 # Data type: int (NOTE: must fit to 3 bits)
124 # 'cfi' - Specifies if frames can or cannot be dropped during
125 # congestion (DEI header field).
126 # Data type: int (NOTE: must fit to 1 bit)
129 'traffic_type' : 'rfc2544_throughput',
131 'bidir' : 'True', # will be passed as string in title format to tgen
133 'stream_type' : 'L4',
134 'pre_installed_flows' : 'No', # used by vswitch implementation
135 'flow_type' : 'port', # used by vswitch implementation
139 'srcmac': '00:00:00:00:00:00',
140 'dstmac': '00:00:00:00:00:00',
145 'dstip': '90.90.90.90',
159 #path to traffic generators directory.
160 TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')
162 # traffic generator to use in tests
163 #TRAFFICGEN = 'TestCenter'
165 #TRAFFICGEN = 'IxNet'
168 #TRAFFICGEN = 'Moongen'
170 # List of packet sizes to send.
171 # Expand like this: (64, 128, 256, 512, 1024)
172 TRAFFICGEN_PKT_SIZES = (64,)
174 TRAFFICGEN_DURATION = 30
176 TRAFFICGEN_RFC2544_TESTS = 1
177 TRAFFICGEN_RFC2889_TRIALS = 1
178 TRAFFICGEN_LOSSRATE = 0.0
180 ##############################
181 # DUMMY Configuration -- BEGIN
183 # By default, dummy traffic generator asks for "measured" values.
184 # Following dictionary allows to preconfigure these values and
185 # to avoid user interaction. It can be useful for automated
187 # Example of values for continuous traffic type:
188 # TRAFFICGEN_DUMMY_RESULTS{'frames rx': 500000,
189 # 'frames tx': 500000,
195 # 'avg latency': 2.5,
198 TRAFFICGEN_DUMMY_RESULTS = {}
200 # DUMMY Configuration -- END
201 ############################
203 #############################
204 # IXIA Configuration -- BEGIN
206 # path to 'ixos' install path
207 TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
209 # network address of IXIA chassis
210 TRAFFICGEN_IXIA_HOST = ''
212 TRAFFICGEN_IXIA_CARD = ''
214 TRAFFICGEN_IXIA_PORT1 = ''
216 TRAFFICGEN_IXIA_PORT2 = ''
218 TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnetwork/lib/IxTclNetwork'
220 # IxNetwork host IP address
221 TRAFFICGEN_IXNET_MACHINE = ''
222 TRAFFICGEN_IXNET_PORT = ''
223 TRAFFICGEN_IXNET_USER = ''
224 TRAFFICGEN_IXNET_CHASSIS = ''
226 # The result directory on $TRAFFICGEN_IXNET_MACHINE
227 TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''
229 # The result directory on DUT. This needs to map to the same directory
230 # as the previous one
231 TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''
233 # directory with 3rd party scripts generated by IXIA tools
234 TRAFFICGEN_IXIA_3RD_PARTY = os.path.join(ROOT_DIR, '3rd_party/ixia')
236 # default TCL script, which will be used for IXNETWORK configuration
237 TRAFFICGEN_IXNET_TCL_SCRIPT = 'ixnetrfc2544.tcl'
239 # IXIA Configuration -- END
240 ###########################
243 ###########################################
244 # Spirent TestCenter Configuration -- BEGIN
246 # Path to Python 2 executable
247 TRAFFICGEN_STC_PYTHON2_PATH = "/bin/python2.7"
249 # Path to the location of the TestCenter files
250 TRAFFICGEN_STC_TESTCENTER_PATH = os.path.join(ROOT_DIR, 'tools/pkt_gen/testcenter')
252 # Name of the TestCenter RFC2544 Tput helper python script
253 TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
255 # Name of the Testcenter RFC2899 Tput Helper Python Scripts
256 TRAFFICGEN_STC_RFC2889_TEST_FILE_NAME = "testcenter-rfc2889-rest.py"
258 # 2889 Port Locations
259 TRAFFICGEN_STC_RFC2889_LOCATION = ""
261 # The address of the Spirent Lab Server to use
262 TRAFFICGEN_STC_LAB_SERVER_ADDR = ""
264 # The address of the Spirent License Server in your environment
265 TRAFFICGEN_STC_LICENSE_SERVER_ADDR = ""
267 # The address of the TestCenter chassis that holds the east port
268 TRAFFICGEN_STC_EAST_CHASSIS_ADDR = ""
270 # The slot number of the card that holds the east port
271 TRAFFICGEN_STC_EAST_SLOT_NUM = ""
273 # The port number on the card that holds the east port
274 TRAFFICGEN_STC_EAST_PORT_NUM = ""
276 # The address of the TestCenter chassis that holds the west port
277 TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""
279 # The slot number of the card that holds the west port
280 TRAFFICGEN_STC_WEST_SLOT_NUM = ""
282 # The port number on the card that holds the west port
283 TRAFFICGEN_STC_WEST_PORT_NUM = ""
285 # The friendly name to identify the Spirent Lab Server test session
286 TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
287 # The directory to copy results to
289 TRAFFICGEN_STC_RESULTS_DIR = os.path.join(ROOT_DIR, "Results")
290 # The prefix for the CSV results file
292 TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
293 # The number of trials to execute during the test
295 TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"
297 # The duration of each trial executed during the test, in seconds
298 TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"
300 # The traffic pattern between endpoints, BACKBONE, MESH or PAIR
301 TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"
303 # The search mode used to find the throughput rate, COMBO, STEP or BINARY
304 TRAFFICGEN_STC_SEARCH_MODE = "BINARY"
306 # The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
307 TRAFFICGEN_STC_LEARNING_MODE = "AUTO"
309 # The minimum percent line rate that will be used during the test
310 TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"
312 # The maximum percent line rate that will be used during the test
313 TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"
315 # If SearchMode is BINARY, the percent line rate that will be used at the start of the test
316 TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"
318 # When SearchMode is STEP, the percent increase in load per step
319 TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"
321 # The minimum percentage of load adjustment between iterations
322 TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"
324 # The frame size, in bytes
325 TRAFFICGEN_STC_FRAME_SIZE = "256"
327 # The maximum acceptable frame loss percent in any iteration
328 TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"
330 # The address to assign to the first emulated device interface on the first east port
331 TRAFFICGEN_STC_EAST_INTF_ADDR = ""
333 # The gateway address to assign to the first emulated device interface on the first east port
334 TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = ""
336 # The address to assign to the first emulated device interface on the first west port
337 TRAFFICGEN_STC_WEST_INTF_ADDR = ""
339 # The gateway address to assign to the first emulated device interface on the first west port
340 TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = ""
342 # Print additional information to the terminal during the test
343 TRAFFICGEN_STC_VERBOSE = "True"
345 # Spirent TestCenter Configuration -- END
346 #########################################
348 #############################
349 # Xena Configuration -- BEGIN
351 # Xena traffic generator connection info
352 TRAFFICGEN_XENA_IP = ''
353 TRAFFICGEN_XENA_PORT1 = ''
354 TRAFFICGEN_XENA_PORT2 = ''
355 TRAFFICGEN_XENA_USER = ''
356 TRAFFICGEN_XENA_PASSWORD = ''
357 TRAFFICGEN_XENA_MODULE1 = ''
358 TRAFFICGEN_XENA_MODULE2 = ''
361 TRAFFICGEN_XENA_PORT0_IP = '192.168.199.10'
362 TRAFFICGEN_XENA_PORT0_CIDR = 24
363 TRAFFICGEN_XENA_PORT0_GATEWAY = '192.168.199.1'
364 TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
365 TRAFFICGEN_XENA_PORT1_CIDR = 24
366 TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
368 # Xena RFC 2544 options
369 # Please reference xena documentation before making changes to these settings
370 TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
371 TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
372 TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
373 TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
374 TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
375 TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
377 # Xena Continuous traffic options
378 # Please reference xena documentation before making changes to these settings
379 TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
380 TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
382 # Xena Configuration -- END
383 ###########################
385 ###################################################
386 # MoonGen Configuration and Connection Info-- BEGIN
388 # Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
389 TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ''
390 TRAFFICGEN_MOONGEN_USER = ''
391 TRAFFICGEN_MOONGEN_BASE_DIR = ''
392 TRAFFICGEN_MOONGEN_PORTS = ''
393 # Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
394 # Today only 10 Gbps is supported
395 TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ''
397 # MoonGen Configuration and Connection Info-- END
398 ###################################################