1 # Copyright 2015 Intel Corporation.
3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at
7 # http://www.apache.org/licenses/LICENSE-2.0
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
15 # ############################
16 # Traffic gen configuration
17 # ############################
19 # log file for all traffic generator related commands
20 LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
22 #path to traffic generators directory.
23 TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')
25 # traffic generator to use in tests
26 #TRAFFICGEN = 'TestCenter'
31 # List of packet sizes to send.
32 # Expand like this: (64, 128, 256, 512, 1024)
33 TRAFFICGEN_PKT_SIZES = (64,)
35 # path to 'ixos' install path
36 TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
38 # network address of IXIA chassis
39 TRAFFICGEN_IXIA_HOST = ''
41 TRAFFICGEN_IXIA_CARD = ''
43 TRAFFICGEN_IXIA_PORT1 = ''
45 TRAFFICGEN_IXIA_PORT2 = ''
47 TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnetwork/lib/IxTclNetwork'
49 # IxNetwork host IP address
50 TRAFFICGEN_IXNET_MACHINE = ''
51 TRAFFICGEN_IXNET_PORT = ''
52 TRAFFICGEN_IXNET_USER = ''
53 TRAFFICGEN_IXNET_CHASSIS = ''
55 # The result directory on $TRAFFICGEN_IXNET_MACHINE
56 TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''
58 # The result directory on DUT. This needs to map to the same directory
60 TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''
62 ###########################################
63 # Spirent TestCenter Configuration -- BEGIN
65 # Path to Python 2 executable
66 TRAFFICGEN_STC_PYTHON2_PATH = "/bin/python2.7"
68 # Path to the location of the TestCenter files
69 TRAFFICGEN_STC_TESTCENTER_PATH = os.path.join(ROOT_DIR, 'tools/pkt_gen/testcenter')
71 # Name of the TestCenter RFC2544 Tput helper python script
72 TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
74 # The address of the Spirent Lab Server to use
75 TRAFFICGEN_STC_LAB_SERVER_ADDR = ""
77 # The address of the Spirent License Server in your environment
78 TRAFFICGEN_STC_LICENSE_SERVER_ADDR = ""
80 # The address of the TestCenter chassis that holds the east port
81 TRAFFICGEN_STC_EAST_CHASSIS_ADDR = ""
83 # The slot number of the card that holds the east port
84 TRAFFICGEN_STC_EAST_SLOT_NUM = ""
86 # The port number on the card that holds the east port
87 TRAFFICGEN_STC_EAST_PORT_NUM = ""
89 # The address of the TestCenter chassis that holds the west port
90 TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""
92 # The slot number of the card that holds the west port
93 TRAFFICGEN_STC_WEST_SLOT_NUM = ""
95 # The port number on the card that holds the west port
96 TRAFFICGEN_STC_WEST_PORT_NUM = ""
98 # The friendly name to identify the Spirent Lab Server test session
99 TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
100 # The directory to copy results to
102 TRAFFICGEN_STC_RESULTS_DIR = "./Results"
103 # The prefix for the CSV results file
105 TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
106 # The number of trials to execute during the test
108 TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"
110 # The duration of each trial executed during the test, in seconds
111 TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"
113 # The traffic pattern between endpoints, BACKBONE, MESH or PAIR
114 TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"
116 # The search mode used to find the throughput rate, COMBO, STEP or BINARY
117 TRAFFICGEN_STC_SEARCH_MODE = "BINARY"
119 # The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
120 TRAFFICGEN_STC_LEARNING_MODE = "AUTO"
122 # The minimum percent line rate that will be used during the test
123 TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"
125 # The maximum percent line rate that will be used during the test
126 TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"
128 # If SearchMode is BINARY, the percent line rate that will be used at the start of the test
129 TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"
131 # When SearchMode is STEP, the percent increase in load per step
132 TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"
134 # The minimum percentage of load adjustment between iterations
135 TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"
137 # The frame size, in bytes
138 TRAFFICGEN_STC_FRAME_SIZE = "256"
140 # The maximum acceptable frame loss percent in any iteration
141 TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"
143 # The address to assign to the first emulated device interface on the first east port
144 TRAFFICGEN_STC_EAST_INTF_ADDR = ""
146 # The gateway address to assign to the first emulated device interface on the first east port
147 TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = ""
149 # The address to assign to the first emulated device interface on the first west port
150 TRAFFICGEN_STC_WEST_INTF_ADDR = ""
152 # The gateway address to assign to the first emulated device interface on the first west port
153 TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = ""
155 # Print additional information to the terminal during the test
156 TRAFFICGEN_STC_VERBOSE = "True"
158 # Spirent TestCenter Configuration -- END
159 #########################################